Last updated at 11/05/2026 06:17:46
3/64" (1.19mm) Jobber Hss Drill Bit Titanium Coated Twist Split Point
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
3/64" x 44mm Gold Series HSS Jobber Drill Bit Alpha 9LI364
Free delivery between Wed – Fri
Alpha - (1.19mm) Jobber Drill Bit - Gold Series (Pkt 10) | 9LI364
Delivery between 12–20 May $7.95
3/64 Jobber Drill Bit
Delivery $22
3/64" (1.19mm) Jobber Hss Drill Bit Titanium Coated Twist Split Point
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
3/64" x 44mm Gold Series HSS Jobber Drill Bit Alpha 9LI364
Free delivery between Wed – Fri
Alpha - (1.19mm) Jobber Drill Bit - Gold Series (Pkt 10) | 9LI364
Delivery between 12–20 May $7.95
3/64 Jobber Drill Bit
Delivery $22
For effective drilling, the rigidity of the drilland work piece are most important. The shorter the flute length the more rigid the drill. Long drills must be adequately supported to reduce vibration. The following are important in drill use: Clamp the work piece securely Select the correct speed and feed Use an appropriate coolant or lubricant Ensure the shank is securely held. Aviod using worn drill chucks as the drill may slip during use. Regrind the point or replace the drill before it dulls, do not force a worn drill. When deep hole drilling, withdraw frequently to clear the chips ( deep holes start at 4X the diameter) For stainless steel, manganese and high tensile steels, do not allow the drill to swell as it will cause work-hardening. Use a slower speed and heavier feed for these materials.
For effective drilling, the rigidity of the drilland work piece are most important. The shorter the flute length the more rigid the drill. Long drills must be adequately supported to reduce vibration. The following are important in drill use: Clamp the work piece securely Select the correct speed and feed Use an appropriate coolant or lubricant Ensure the shank is securely held. Aviod using worn drill chucks as the drill may slip during use. Regrind the point or replace the drill before it dulls, do not force a worn drill. When deep hole drilling, withdraw frequently to clear the chips ( deep holes start at 4X the diameter) For stainless steel, manganese and high tensile steels, do not allow the drill to swell as it will cause work-hardening. Use a slower speed and heavier feed for these materials.
in 4 offers
last seen 11 May 2026
The lowest price we last saw for 3/64" x 44mm Gold Series HSS Jobber Drill Bit Alpha 9LI364 was $6.00 at eBay.com.au, compared across 4 retailers (last seen 11 May 2026). Prices may have changed since.
The all-time low we recorded was $1.40 on 5 Apr 2026.
Prices last updated 11 May 2026.
3/64" x 44mm Gold Series HSS Jobber Drill Bit Alpha 9LI364
For effective drilling, the rigidity of the drilland work piece are most important. The shorter the flute length the more rigid the drill. Long drills must be adequately supported to reduce vibration. The following are important in drill use: Clamp the work piece securely Select the correct speed and feed Use an appropriate coolant or lubricant Ensure the shank is securely held. Aviod using worn drill chucks as the drill may slip during use. Regrind the point or replace the drill before it dulls, do not force a worn drill. When deep hole drilling, withdraw frequently to clear the chips ( deep holes start at 4X the diameter) For stainless steel, manganese and high tensile steels, do not allow the drill to swell as it will cause work-hardening. Use a slower speed and heavier feed for these materials.
For effective drilling, the rigidity of the drilland work piece are most important. The shorter the flute length the more rigid the drill. Long drills must be adequately supported to reduce vibration. The following are important in drill use: Clamp the work piece securely Select the correct speed and feed Use an appropriate coolant or lubricant Ensure the shank is securely held. Aviod using worn drill chucks as the drill may slip during use. Regrind the point or replace the drill before it dulls, do not force a worn drill. When deep hole drilling, withdraw frequently to clear the chips ( deep holes start at 4X the diameter) For stainless steel, manganese and high tensile steels, do not allow the drill to swell as it will cause work-hardening. Use a slower speed and heavier feed for these materials.
