Pan Phillips Self Tapper Screws create (taps) it's own thread as the screw is being driven in. Pan heads feature a flat dome style rounded head and a flat underside designed to provide maximum holding power on flat surfaces. Suitable for: Can you be used in light gauge steel aluminium certain plastics and timber. To ensure the best result it is recommended to always drill a pilot hole Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of Zinc is applied by either electroplating or mechanically. It is intended to be used internally whilst some people use it externally it isnt recommended if corrosion may be a concern instead search our Stainless steel range Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
Pan Phillips Self Tapper Screws create (taps) it's own thread as the screw is being driven in. Pan heads feature a flat dome style rounded head and a flat underside designed to provide maximum holding power on flat surfaces. Suitable for: Can you be used in light gauge steel aluminium certain plastics and timber. To ensure the best result it is recommended to always drill a pilot hole Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of Zinc is applied by either electroplating or mechanically. It is intended to be used internally whilst some people use it externally it isnt recommended if corrosion may be a concern instead search our Stainless steel range Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
in 2 offers
The lowest price for 6g-20 x 1-1/4" Pan Phillips (PH2) Self Tapper Screw Zinc Plated ANSI B18.6.4 right now is $5.00 at Bolt & Nut Australia, compared across 2 retailers.
The all-time low was $5.00 on 1 Mar 2026. That's the lowest price we've ever tracked — a great time to buy.
Prices last updated 9 May 2026.
6g-20 x 1-1/4" Pan Phillips (PH2) Self Tapper Screw Zinc Plated ANSI B18.6.4
Pan Phillips Self Tapper Screws create (taps) it's own thread as the screw is being driven in. Pan heads feature a flat dome style rounded head and a flat underside designed to provide maximum holding power on flat surfaces. Suitable for: Can you be used in light gauge steel aluminium certain plastics and timber. To ensure the best result it is recommended to always drill a pilot hole Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of Zinc is applied by either electroplating or mechanically. It is intended to be used internally whilst some people use it externally it isnt recommended if corrosion may be a concern instead search our Stainless steel range Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
Pan Phillips Self Tapper Screws create (taps) it's own thread as the screw is being driven in. Pan heads feature a flat dome style rounded head and a flat underside designed to provide maximum holding power on flat surfaces. Suitable for: Can you be used in light gauge steel aluminium certain plastics and timber. To ensure the best result it is recommended to always drill a pilot hole Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of Zinc is applied by either electroplating or mechanically. It is intended to be used internally whilst some people use it externally it isnt recommended if corrosion may be a concern instead search our Stainless steel range Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
Last updated at 09/05/2026 23:47:12
6g (3.50mm) x 1-1/4" Pan Phillips (PH2) Self Tapping Screw Zinc Plated ANSI B18.6.4
Free delivery between Tue – Thu
Hobsons - #6-20 x 1-1/4 Zinc Plated (Rohs Compliant) Ansi B18.6.3 Type Ab Self-Tapper Pan Phil | Tzpp06125 (Pack Of 1000)
Delivery between 11–19 May $7.95
| Size | 6g (3.50mm) |
| Drive Type | Phillips |
| System of Measurement | Screw Gauge |
| Head Type | Pan Head |
| Finish | Zinc Plated |
6g (3.50mm) x 1-1/4" Pan Phillips (PH2) Self Tapping Screw Zinc Plated ANSI B18.6.4
Free delivery between Tue – Thu
Hobsons - #6-20 x 1-1/4 Zinc Plated (Rohs Compliant) Ansi B18.6.3 Type Ab Self-Tapper Pan Phil | Tzpp06125 (Pack Of 1000)
Delivery between 11–19 May $7.95
| Size | 6g (3.50mm) |
| Drive Type | Phillips |
| System of Measurement | Screw Gauge |
| Head Type | Pan Head |
| Finish | Zinc Plated |
