Bambu Lab PLA Matte Nardo Grey (Refill)

Bambu PLA Matte Achieve high-quality prints with a smooth, fine-grained finish using Bambu PLA Matte. Ideal for professionals and hobbyists alike, it adds an elegant touch to your 3D project. Elegant Matte Finish Bambu PLA Matte significantly reduces visible layer lines, offering a smooth, non-glossy appearance that makes your prints stand out. Its sleek, refined look is perfect for design projects, architectural models, and display pieces. A Palette of Soft, Subtle Colors Select from a curated range of elegant, muted colors that beautifully complement the matte finish, ideal for art, fashion designs, and décor projects. Easy to Print, High Quality Bambu PLA Matte delivers premium results at speeds of up to 270 mm/s* without the need for extensive adjustments. * 0.4mm nozzle, 0.4mm line width, 0.2mm layer height RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps. Instructions for Printed Spool When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x). Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll. Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece. Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock. Step 1. Make sure the spacing shim is installed inside the spool (under the triangle). Step 2. Tear apart and pull out the plastic strips.