DC-DC Multi-output Buck Converter (3.3V/5V/9V/12V)
Introduction Multiple-output DC–DC converters are essential in a multitude of applications where different DC output voltages are required. This DC-DC step-down voltage power module converts 7.5V~30V input to an output of 3.3V/5V/9V/12V (default to 5V), which can be selected by short-circuiting the corresponding pads on the back. It withstands up to 5A load current with suitable heat dissipation and has 70°C over-temperature and overload protections. Besides, there is an onboard LED indicator that shows a solid red light when everything works fine and goes out when the protection mechanism is triggered and the voltage automatically drops to 0.1V. The multi-voltage buck power module can be used in power control systems for LEDs, robots, drones, servos, low-power motors, and so on. Instruction This module outputs 5V by default and the corresponding 5V solder pad is short-circuited. To output other voltages, for instance, 3.3V, please disconnect the 5V pad and short-circuit the 3.3V solder pad. Note: Since this is a step-down converter, the input voltage should be larger than the output, and it works better with a voltage difference of 2V and above. Note: The output parameters are measured at 25 °C, and the heat dissipation (heat sinks) is required for continuous large current load.
Introduction Multiple-output DC–DC converters are essential in a multitude of applications where different DC output voltages are required. This DC-DC step-down voltage power module converts 7.5V~30V input to an output of 3.3V/5V/9V/12V (default to 5V), which can be selected by short-circuiting the corresponding pads on the back. It withstands up to 5A load current with suitable heat dissipation and has 70°C over-temperature and overload protections. Besides, there is an onboard LED indicator that shows a solid red light when everything works fine and goes out when the protection mechanism is triggered and the voltage automatically drops to 0.1V. The multi-voltage buck power module can be used in power control systems for LEDs, robots, drones, servos, low-power motors, and so on. Instruction This module outputs 5V by default and the corresponding 5V solder pad is short-circuited. To output other voltages, for instance, 3.3V, please disconnect the 5V pad and short-circuit the 3.3V solder pad. Note: Since this is a step-down converter, the input voltage should be larger than the output, and it works better with a voltage difference of 2V and above. Note: The output parameters are measured at 25 °C, and the heat dissipation (heat sinks) is required for continuous large current load.
Introduction Multiple-output DC–DC converters are essential in a multitude of applications where different DC output voltages are required. This DC-DC step-down voltage power module converts 7.5V~30V input to an output of 3.3V/5V/9V/12V (default to 5V), which can be selected by short-circuiting the corresponding pads on the back. It withstands up to 5A load current with suitable heat dissipation and has 70°C over-temperature and overload protections. Besides, there is an onboard LED indicator that shows a solid red light when everything works fine and goes out when the protection mechanism is triggered and the voltage automatically drops to 0.1V. The multi-voltage buck power module can be used in power control systems for LEDs, robots, drones, servos, low-power motors, and so on. Instruction This module outputs 5V by default and the corresponding 5V solder pad is short-circuited. To output other voltages, for instance, 3.3V, please disconnect the 5V pad and short-circuit the 3.3V solder pad. Note: Since this is a step-down converter, the input voltage should be larger than the output, and it works better with a voltage difference of 2V and above. Note: The output parameters are measured at 25 °C, and the heat dissipation (heat sinks) is required for continuous large current load.
Introduction Multiple-output DC–DC converters are essential in a multitude of applications where different DC output voltages are required. This DC-DC step-down voltage power module converts 7.5V~30V input to an output of 3.3V/5V/9V/12V (default to 5V), which can be selected by short-circuiting the corresponding pads on the back. It withstands up to 5A load current with suitable heat dissipation and has 70°C over-temperature and overload protections. Besides, there is an onboard LED indicator that shows a solid red light when everything works fine and goes out when the protection mechanism is triggered and the voltage automatically drops to 0.1V. The multi-voltage buck power module can be used in power control systems for LEDs, robots, drones, servos, low-power motors, and so on. Instruction This module outputs 5V by default and the corresponding 5V solder pad is short-circuited. To output other voltages, for instance, 3.3V, please disconnect the 5V pad and short-circuit the 3.3V solder pad. Note: Since this is a step-down converter, the input voltage should be larger than the output, and it works better with a voltage difference of 2V and above. Note: The output parameters are measured at 25 °C, and the heat dissipation (heat sinks) is required for continuous large current load.
in 11 offers
The lowest price for DC-DC Multi-output Buck Converter (3.3V/5V/9V/12V) right now is $7.87 at Electromaker.io, compared across 11 retailers.
The all-time low was $4.79 on 5 Mar 2026 — today's price is 64% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 17 Nov 2026.
Last updated at 17/11/2026 11:21:44
Dc-dc Multi-output Buck Converter (3.3v/5v/9v/12v) | DFRobot
Delivery between 19–25 Nov $29.70
DC-DC Multi-output Buck Converter (3.3V/5V/9V/12V)
Delivery between 21–25 Nov $26.73
DFRobot DFR1015 Power Management IC Development Tools
Delivery between 23–27 Nov $24
Dfrobot DFR1015 Dc-Dc Step Down Voltage Pwr Mod/7.5V-30V
Delivery between 23–26 Nov $26.40
DFRobot DFR1015 DC-DC MULTI-OUTPUT BUCK CONVERTE
Delivery between 23–27 Nov $24
DC-DC Multi-output Buck Converter (3.3V/5V/9V/12V)
Delivery between Thu – Fri $6.95
DC-DC Multi-output Buck Converter (3.3V/5V/9V/12V)
Delivery between 23 Nov – 1 Dec $10
DC-DC Multi-output Buck Converter (3.3V/5V/9V/12V)
Delivery between 23 Nov – 1 Dec $7.95
DC-DC Multi-output Buck Converter (3.3V/5V/9V/12V)
DFR1015 DFROBOT Converter: step down
Delivery $44.40
| Output Current Rating | 5 A (at 5V, with heat dissipation) |
| Output Power Rating | 42 W (at 12V, with heat dissipation) |
| Output Voltage | 9 V |
| Amp Rating | 5 A (at 5V, with heat dissipation) |
| Power Rating | 42 W (at 12V, with heat dissipation) |
Dc-dc Multi-output Buck Converter (3.3v/5v/9v/12v) | DFRobot
Delivery between 19–25 Nov $29.70
DC-DC Multi-output Buck Converter (3.3V/5V/9V/12V)
Delivery between 21–25 Nov $26.73
DFRobot DFR1015 Power Management IC Development Tools
Delivery between 23–27 Nov $24
Dfrobot DFR1015 Dc-Dc Step Down Voltage Pwr Mod/7.5V-30V
Delivery between 23–26 Nov $26.40
DFRobot DFR1015 DC-DC MULTI-OUTPUT BUCK CONVERTE
Delivery between 23–27 Nov $24
| Output Current Rating | 5 A (at 5V, with heat dissipation) |
| Output Power Rating | 42 W (at 12V, with heat dissipation) |
| Output Voltage | 9 V |
| Amp Rating | 5 A (at 5V, with heat dissipation) |
| Power Rating | 42 W (at 12V, with heat dissipation) |