Last updated at 03/09/2026 20:11:30
DF64 Gen2 Commercial Red Titanium Burr Mill 64mm Flat Burr Espresso Machine Coffee Maker Electric
Delivery $180.08
Buy Coffee Tech Df64 Single Dose Gen 2 Grinder Black
Free delivery
originally posted on alternativebrewing.com.au
I picked up a new DF64 over Christmas and over the last month of using it have been thoroughly impressed with its performance and workflow.I believe the model I received is a slightly updated version to earlier models that have been thoroughly reviewed. It came wrapped in the same Matt black finish that is now available on a the DF83 - a nice upgrade that has meant no fingerprint markings and an easier to clean surface (especially with grinds around the chute). Accessories in the box also included an aluminum grind indicator ring, rubber dosing cup holder (thanks for the 3d printed one too AB), an atomizer for RDT, and a soft brush for cleaning.This is a great package of essential add-ons for the DF64 that make workflow all that much easier.Out of the box the ... MoreI picked up a new DF64 over Christmas and over the last month of using it have been thoroughly impressed with its performance and workflow.I believe the model I received is a slightly updated version to earlier models that have been thoroughly reviewed. It came wrapped in the same Matt black finish that is now available on a the DF83 - a nice upgrade that has meant no fingerprint markings and an easier to clean surface (especially with grinds around the chute). Accessories in the box also included an aluminum grind indicator ring, rubber dosing cup holder (thanks for the 3d printed one too AB), an atomizer for RDT, and a soft brush for cleaning.This is a great package of essential add-ons for the DF64 that make workflow all that much easier.Out of the box the new titanium Italmill burrs seemed to be properly aligned and have so far produced some great tasting espresso. Now that they’ve been properly seasoned I’m seeing some great consistency shot to shot, with a noticeable improvement in clarity in my preferred light roasted single origin beans. Whilst the flat burrs have less margin or error in dialing in than the conical burr grinder I was using, I feel like the shots I’m pulling are now far cleaner and flavor-wise more representative of the actual beans I’m grinding. The second bag I put through my DF64 was a natural Ethiopian heirloom, and I swear someone snuck Allen’s Banana lollies into my cup.Adjusting the grind setting is super simple with the large dial ring around the outside of the grinder. There’s enough friction to make deliberate and small adjustments, and with the included indicator ring knowing your current setting is easy. Like others have said, there is a smaller than ideal sweetspot for espresso with the grinder, and more often than not I’m still overshooting adjustments when dialing in because I’m anticipating needing to make a larger adjustment than actually required. I’m sure as I continue to learn the grinder’s nuances this won’t be an issue, but for now I’m still wasting a shot or 2 getting my espresso extraction optimized. It doesn’t help that I enjoy changing my beans from one single origin to another every time I buy a bag of beans.The grinder still came with the original silicon de-clumper that has featured as the pain point in most other reviews (not the newer dual plastic de-clumper that the V4 appears to ship with). Initially I was seeing some fairly big retention issues (up to .5/g), however this has reduced in the last few weeks to be 0.1-0.2/g with some liberal use of the bellows as the silicon has softened with use. I feel like I need to pump quite hard several times to get the entire dose out, and quite a lot of grounds will fall out with bellowing, but I’m now able to get consistent results. I’m still on the fence about upgrading the chute and either modding or upgrading the declumper, but for now it just means grinding an extra bean or two and then re-weighing after grinding to make sure I have my required dose.Pop-corning is the last minor ****** with this grinder that I’ll touch on - purely as I feel it’s the biggest contributor to retention. Bellowing seems to work the best when there is a decent build up of grinds behind the declumper, and with the last few beans of my dose jumping around inside, it’s usually the culprit when I see a larger swing in retention than anticipated.All in all the DF64 is still a fantastic grinder for the money, and a great upgrade from my Breville Smart Grinder Pro I had been using previously. It seems this current version Alternative Brewing is stocking goes a ways to improve upon the initial design based on the feedback from previous versions, but there is still room for improvement, especially in regard to the declumper and chute being the main culprits of retention.Bottom line is if you’re looking for a single dose, low retention grinder below $1000 (when on sale), and aren’t opposed to rolling up your sleeves to install a mod or two, it’s hard to not recommend the DF64 as a great value option.
originally posted on thekitchenbarista.com
Grinder: The build quality on this is no joke. All components feel premium and well made. My initial concerns before buying were common complaints of: button failure and noise.Button: it seems that the people who experienced button failure were the ones that received their DF64 with the red plastic button. I was relieved to see that KB sent my grinder with the silver metal button.Noise: It really isn’t as loud as people make it seem. I had no problems using this in my mornings.Dialing in was effortless. 3 shots in I’m already making delicious, fruity, well bodied and balanced shots. This definitely gets me more fruity flavour tones than my old 1Zpresso J-Ultra hand grinder.KB Customer Service: Amazing. Any questions/concerns I had before/after ordering were ... MoreGrinder: The build quality on this is no joke. All components feel premium and well made. My initial concerns before buying were common complaints of: button failure and noise.Button: it seems that the people who experienced button failure were the ones that received their DF64 with the red plastic button. I was relieved to see that KB sent my grinder with the silver metal button.Noise: It really isn’t as loud as people make it seem. I had no problems using this in my mornings.Dialing in was effortless. 3 shots in I’m already making delicious, fruity, well bodied and balanced shots. This definitely gets me more fruity flavour tones than my old 1Zpresso J-Ultra hand grinder.KB Customer Service: Amazing. Any questions/concerns I had before/after ordering were responded to within 10 minutes.
originally posted on alternativebrewing.com.au
Best upgrade I’ve made in a long time!I’ve just upgraded from my old Rancillio Rocky and am now getting consistent beautiful shots of coffee. I didn’t realise just how rough my old grinder had become.Fine tuning the DF64 is a piece of cake, being stepless I can really dial in to exactly what I want. The build quality is great, and it looks great too! (Something that was important to my partner)I’ve run half a KG of beans through the grinder to bed it in and every morning, I actually look forward to making a cup or two. I can actually taste “notes” that people talk about, one very happy customer!I also had a bit of an issue when ordering, Alternative Brewing staff were more than happy to change my order around (originally ordered a Gen 1 unit) to what I ... MoreBest upgrade I’ve made in a long time!I’ve just upgraded from my old Rancillio Rocky and am now getting consistent beautiful shots of coffee. I didn’t realise just how rough my old grinder had become.Fine tuning the DF64 is a piece of cake, being stepless I can really dial in to exactly what I want. The build quality is great, and it looks great too! (Something that was important to my partner)I’ve run half a KG of beans through the grinder to bed it in and every morning, I actually look forward to making a cup or two. I can actually taste “notes” that people talk about, one very happy customer!I also had a bit of an issue when ordering, Alternative Brewing staff were more than happy to change my order around (originally ordered a Gen 1 unit) to what I wanted which was the Gen 2.Easiest coffee making upgrade you can make!
DF64 Gen2 Commercial Red Titanium Burr Mill 64mm Flat Burr Espresso Machine Coffee Maker Electric
Delivery $180.08
Buy Coffee Tech Df64 Single Dose Gen 2 Grinder Black
Free delivery
I picked up a new DF64 over Christmas and over the last month of using it have been thoroughly impressed with its performance and workflow.I believe the model I received is a slightly updated version to earlier models that have been thoroughly reviewed. It came wrapped in the same Matt black finish that is now available on a the DF83 - a nice upgrade that has meant no fingerprint markings and an easier to clean surface (especially with grinds around the chute). Accessories in the box also included an aluminum grind indicator ring, rubber dosing cup holder (thanks for the 3d printed one too AB), an atomizer for RDT, and a soft brush for cleaning.This is a great package of essential add-ons for the DF64 that make workflow all that much easier.Out of the box the ... MoreI picked up a new DF64 over Christmas and over the last month of using it have been thoroughly impressed with its performance and workflow.I believe the model I received is a slightly updated version to earlier models that have been thoroughly reviewed. It came wrapped in the same Matt black finish that is now available on a the DF83 - a nice upgrade that has meant no fingerprint markings and an easier to clean surface (especially with grinds around the chute). Accessories in the box also included an aluminum grind indicator ring, rubber dosing cup holder (thanks for the 3d printed one too AB), an atomizer for RDT, and a soft brush for cleaning.This is a great package of essential add-ons for the DF64 that make workflow all that much easier.Out of the box the new titanium Italmill burrs seemed to be properly aligned and have so far produced some great tasting espresso. Now that they’ve been properly seasoned I’m seeing some great consistency shot to shot, with a noticeable improvement in clarity in my preferred light roasted single origin beans. Whilst the flat burrs have less margin or error in dialing in than the conical burr grinder I was using, I feel like the shots I’m pulling are now far cleaner and flavor-wise more representative of the actual beans I’m grinding. The second bag I put through my DF64 was a natural Ethiopian heirloom, and I swear someone snuck Allen’s Banana lollies into my cup.Adjusting the grind setting is super simple with the large dial ring around the outside of the grinder. There’s enough friction to make deliberate and small adjustments, and with the included indicator ring knowing your current setting is easy. Like others have said, there is a smaller than ideal sweetspot for espresso with the grinder, and more often than not I’m still overshooting adjustments when dialing in because I’m anticipating needing to make a larger adjustment than actually required. I’m sure as I continue to learn the grinder’s nuances this won’t be an issue, but for now I’m still wasting a shot or 2 getting my espresso extraction optimized. It doesn’t help that I enjoy changing my beans from one single origin to another every time I buy a bag of beans.The grinder still came with the original silicon de-clumper that has featured as the pain point in most other reviews (not the newer dual plastic de-clumper that the V4 appears to ship with). Initially I was seeing some fairly big retention issues (up to .5/g), however this has reduced in the last few weeks to be 0.1-0.2/g with some liberal use of the bellows as the silicon has softened with use. I feel like I need to pump quite hard several times to get the entire dose out, and quite a lot of grounds will fall out with bellowing, but I’m now able to get consistent results. I’m still on the fence about upgrading the chute and either modding or upgrading the declumper, but for now it just means grinding an extra bean or two and then re-weighing after grinding to make sure I have my required dose.Pop-corning is the last minor ****** with this grinder that I’ll touch on - purely as I feel it’s the biggest contributor to retention. Bellowing seems to work the best when there is a decent build up of grinds behind the declumper, and with the last few beans of my dose jumping around inside, it’s usually the culprit when I see a larger swing in retention than anticipated.All in all the DF64 is still a fantastic grinder for the money, and a great upgrade from my Breville Smart Grinder Pro I had been using previously. It seems this current version Alternative Brewing is stocking goes a ways to improve upon the initial design based on the feedback from previous versions, but there is still room for improvement, especially in regard to the declumper and chute being the main culprits of retention.Bottom line is if you’re looking for a single dose, low retention grinder below $1000 (when on sale), and aren’t opposed to rolling up your sleeves to install a mod or two, it’s hard to not recommend the DF64 as a great value option.
Grinder: The build quality on this is no joke. All components feel premium and well made. My initial concerns before buying were common complaints of: button failure and noise.Button: it seems that the people who experienced button failure were the ones that received their DF64 with the red plastic button. I was relieved to see that KB sent my grinder with the silver metal button.Noise: It really isn’t as loud as people make it seem. I had no problems using this in my mornings.Dialing in was effortless. 3 shots in I’m already making delicious, fruity, well bodied and balanced shots. This definitely gets me more fruity flavour tones than my old 1Zpresso J-Ultra hand grinder.KB Customer Service: Amazing. Any questions/concerns I had before/after ordering were ... MoreGrinder: The build quality on this is no joke. All components feel premium and well made. My initial concerns before buying were common complaints of: button failure and noise.Button: it seems that the people who experienced button failure were the ones that received their DF64 with the red plastic button. I was relieved to see that KB sent my grinder with the silver metal button.Noise: It really isn’t as loud as people make it seem. I had no problems using this in my mornings.Dialing in was effortless. 3 shots in I’m already making delicious, fruity, well bodied and balanced shots. This definitely gets me more fruity flavour tones than my old 1Zpresso J-Ultra hand grinder.KB Customer Service: Amazing. Any questions/concerns I had before/after ordering were responded to within 10 minutes.
Best upgrade I’ve made in a long time!I’ve just upgraded from my old Rancillio Rocky and am now getting consistent beautiful shots of coffee. I didn’t realise just how rough my old grinder had become.Fine tuning the DF64 is a piece of cake, being stepless I can really dial in to exactly what I want. The build quality is great, and it looks great too! (Something that was important to my partner)I’ve run half a KG of beans through the grinder to bed it in and every morning, I actually look forward to making a cup or two. I can actually taste “notes” that people talk about, one very happy customer!I also had a bit of an issue when ordering, Alternative Brewing staff were more than happy to change my order around (originally ordered a Gen 1 unit) to what I ... MoreBest upgrade I’ve made in a long time!I’ve just upgraded from my old Rancillio Rocky and am now getting consistent beautiful shots of coffee. I didn’t realise just how rough my old grinder had become.Fine tuning the DF64 is a piece of cake, being stepless I can really dial in to exactly what I want. The build quality is great, and it looks great too! (Something that was important to my partner)I’ve run half a KG of beans through the grinder to bed it in and every morning, I actually look forward to making a cup or two. I can actually taste “notes” that people talk about, one very happy customer!I also had a bit of an issue when ordering, Alternative Brewing staff were more than happy to change my order around (originally ordered a Gen 1 unit) to what I wanted which was the Gen 2.Easiest coffee making upgrade you can make!
I am quite satisfied with the grinder. It retains about 0.3 grams every time I grind, especially above the popcorn stopper. All I do is brush it in with a soft brush and then it comes out. I also clean the grinder every day (not removing the parts) and use a very thin painters brush to clear the declumper. A lot of clumped coffee comes out that way, and then I bellow. It is such a a difference from the crappy built in Breville grinder, that I can't even mention the both of them in the same sentence. Kitchen barista staff is polite and obliging. They always respond promptly. All in all, I am quite satisfied with product and service. I had a product related issue, and with a little nudging, they solved it. The espresso machine I wanted didn't work out, so I got ... MoreI am quite satisfied with the grinder. It retains about 0.3 grams every time I grind, especially above the popcorn stopper. All I do is brush it in with a soft brush and then it comes out. I also clean the grinder every day (not removing the parts) and use a very thin painters brush to clear the declumper. A lot of clumped coffee comes out that way, and then I bellow. It is such a a difference from the crappy built in Breville grinder, that I can't even mention the both of them in the same sentence. Kitchen barista staff is polite and obliging. They always respond promptly. All in all, I am quite satisfied with product and service. I had a product related issue, and with a little nudging, they solved it. The espresso machine I wanted didn't work out, so I got something local.Thanks again and cheers.
Been using it for two weeks so far for espresso. Very good! Easy to use. Between the electro plasma doodad and the bellows, there is almost no retention. Not too messy either. I’m grinding into the supplied cup with the supplied cup extension ring and very little escapes. Fairly easy to dial in. For espresso, you will be working with fairly small changes down the fine end of the adjustment ring, but it’s not an issue. The espresso seems to have more of what the coffee experts call ‘clarity’ rather than ‘body’. Apparently if you really want to go nuts, different burr sets can shift this balance around. I’m using it with a Breville Bambino and a Pesado BR54 HE[%] basket.
I purchased the DF64 to serve as a backup grinder while waiting for a replacement motor for my Niche Zero. I didn’t expect to prefer it to the Niche, and I don’t. While many of the shortcomings of the V1 DF64 have been addressed by the manufacturer(s?), some design flaws remain. For me, the most significant is that the stock declumper (at least on mine) tends to clog, and when it does it is necessary to partially disassemble the grinder to clear it. This can be mitigated to some extent by madly pumping the bellows during grinding, but I find this stressful and unpleasant. I have now fixed this problem with an after-market declumper, but this entailed more additional bother and expense than I would have preferred. I also don’t love having to employ RDT to manage ... MoreI purchased the DF64 to serve as a backup grinder while waiting for a replacement motor for my Niche Zero. I didn’t expect to prefer it to the Niche, and I don’t. While many of the shortcomings of the V1 DF64 have been addressed by the manufacturer(s?), some design flaws remain. For me, the most significant is that the stock declumper (at least on mine) tends to clog, and when it does it is necessary to partially disassemble the grinder to clear it. This can be mitigated to some extent by madly pumping the bellows during grinding, but I find this stressful and unpleasant. I have now fixed this problem with an after-market declumper, but this entailed more additional bother and expense than I would have preferred. I also don’t love having to employ RDT to manage static, though the inclusion of a little spray bottle for this purpose was a welcome touch. In the DF64’s favor, I am aware that some people prefer the shots they get from a flat burr grinder like the DF64 over those from a conical burr grinder like the Niche. I don’t doubt they can tell the difference, but I can’t, so the workflow considerations are paramount to me. All that said, the DF64 is an undeniably good value at something like 1/3 the price of the Niche, and I do not regret my purchase. As usual, Alternative Brewing provided efficient service and very good pricing, which I appreciate. Now that my Niche has a new motor, though, the DF64 will go into storage as a hedge against grinderlessness should the Niche falter again.
I got this grinder as a replacement for a less convenient style grinder. Straight from the box it makes work flow significantly easier compared to some others. Single dosing with near 0 retention, addition of a dosing cup extension that brings the dosing cup closer to the chute to decrease mess, stepless adjustments, and a quick effective grinder. This model comes with the added 3D printed attachment for the dosing cup (this allowed my Normcore dosing cup to fit), and a dial indicator that you can place on for better visual of grind setting.Issues that are well known are mess, static causes a lot of fine grinds to get stuck to the outside of the machine. This can be managed by the use of RDT or a handy invention called a cleaning cloth. The declumper hasn't seemed ... MoreI got this grinder as a replacement for a less convenient style grinder. Straight from the box it makes work flow significantly easier compared to some others. Single dosing with near 0 retention, addition of a dosing cup extension that brings the dosing cup closer to the chute to decrease mess, stepless adjustments, and a quick effective grinder. This model comes with the added 3D printed attachment for the dosing cup (this allowed my Normcore dosing cup to fit), and a dial indicator that you can place on for better visual of grind setting.Issues that are well known are mess, static causes a lot of fine grinds to get stuck to the outside of the machine. This can be managed by the use of RDT or a handy invention called a cleaning cloth. The declumper hasn't seemed to have been an issue as yet. There is also a bit of "popcorning" from the burrs.I have ordered some mods from online to replace the chute/stock declumper, and an anti popcorn attachment. With these installed it should make this grinder much better.
I researched more expensive grinders and kept seeing comparisons with the DF64 gen 2. But it seemed it was backed-ordered everywhere but IDC, which had the Gen2 with DLC burr upgrade at a very fair price. Shipping was fast.The first thing I noticed was that it was very heavy and the quality of all the accessories was top notch.I ran some old coffee through it to break-in the burrs but that seemed unnecessary as even those shots were decent. Put in the good coffee and it was great.Some reviewers on Youtube mentioned how loud it was, but the grinding sound is the same as I hear in every good espresso place and not as loud as many cheap grinders. To me this is the sound of quality!
I had not much experience with other grinders but this grinder is solid. It is a single dose grinder which is good if you like to change beans or going decaf in the afternoon.After using it for a couple of weeks, I like it. It stopped working one time and seems like there is coffee that got stuck inside. I turned the grind size dial to coarser grind and the machine ‘spits’ out all the coffee 😅 problem fixed.The dial is nice, making it easy to change the setting to grind finer or coarser. I use it for espresso so can’t comment on other grind size for other types of brewing method.Overall it is a solid machine, build like a tank 😁. I was skeptical as it is made in China, however, it is well built. I can see why everyone likes it. This is the generation 2 thus it ... MoreI had not much experience with other grinders but this grinder is solid. It is a single dose grinder which is good if you like to change beans or going decaf in the afternoon.After using it for a couple of weeks, I like it. It stopped working one time and seems like there is coffee that got stuck inside. I turned the grind size dial to coarser grind and the machine ‘spits’ out all the coffee 😅 problem fixed.The dial is nice, making it easy to change the setting to grind finer or coarser. I use it for espresso so can’t comment on other grind size for other types of brewing method.Overall it is a solid machine, build like a tank 😁. I was skeptical as it is made in China, however, it is well built. I can see why everyone likes it. This is the generation 2 thus it has many improvements. I did not find much static, which was an issue with the previous generation.Overall, solid grinder, very happy about it. I also like the dosing cup that comes with it.
coming from a old baratza vario, this is definitely a step up. it is quicker, and quieter (yes) and really improves the workflow. its also a cleaner machine. quality is excellent. serviceability is excellent. the pump at the top works really well as long as the grinder is on. i have had no issues with messes. that plasma thing does a very good job. i love being able to dose the exact amount of beans. i think you could grind a single dose with any grinder, but you'd be left with a lot more grinds left behind. this has been designed with single dose in mind. i wouldn't go back to the old machine.
DF64 Gen 2 Single Dose Coffee Grinder with DLC Burrs - Black
he DF64 GEN 2 Single Dose Coffee Grinder is a remarkable blend of the manufacturer's cumulative insights from its earlier models, designed with a focus on delivering a superior grinding experience. At the heart of this grinder is a robust 250W motor, providing ample power to the 64mm DLC (Diamond-Like-Coating) burrs, ensuring precise and consistent grind sizes. The addition of a plasma generator significantly reduces static, a common annoyance in grinding, ensuring a smoother flow of coffee grounds through the exit chute. Among the notable upgrades is the built-in anti-popcorn lid, which, along with a metal dosing cup and metal funnel, enhances the single-dosing capability of this grinder. Only the exact amount of beans needed are ground, eliminating the chance of stale coffee and maintaining the freshness and flavour in every cup. The grinder's extremely low retention (ELR) feature ensures that almost all of your coffee ends up in the cup, not stuck in the grinder. It's particularly designed with espresso in mind, yet it shines in the pour-over range as well. The stepless micrometric adjustments offer unlimited grind size settings, allowing users to find the perfect grind size for their brewing method. It also ranks amongst the best grinders available on the market, with less than 1g of retention, 0.2g dose variance, and less than 0.3g exchange. Cleaning and maintenance have been made a breeze with this model. A simple unscrewing of the collar grants access to the burrs for easy cleaning, ensuring the longevity and continued performance of the grinder. Including a 58mm dosing cup allows direct grinding into the cup or your portafilter, adding a touch of convenience to your coffee routine. With its sleek painted body, wooden lid, and premium feel that reflects its enhanced functionality, the DF64 GEN 2 Single Dose Coffee Grinder is not just a step but a leap forward in home coffee grinding technology.
he DF64 GEN 2 Single Dose Coffee Grinder is a remarkable blend of the manufacturer's cumulative insights from its earlier models, designed with a focus on delivering a superior grinding experience. At the heart of this grinder is a robust 250W motor, providing ample power to the 64mm DLC (Diamond-Like-Coating) burrs, ensuring precise and consistent grind sizes. The addition of a plasma generator significantly reduces static, a common annoyance in grinding, ensuring a smoother flow of coffee grounds through the exit chute. Among the notable upgrades is the built-in anti-popcorn lid, which, along with a metal dosing cup and metal funnel, enhances the single-dosing capability of this grinder. Only the exact amount of beans needed are ground, eliminating the chance of stale coffee and maintaining the freshness and flavour in every cup. The grinder's extremely low retention (ELR) feature ensures that almost all of your coffee ends up in the cup, not stuck in the grinder. It's particularly designed with espresso in mind, yet it shines in the pour-over range as well. The stepless micrometric adjustments offer unlimited grind size settings, allowing users to find the perfect grind size for their brewing method. It also ranks amongst the best grinders available on the market, with less than 1g of retention, 0.2g dose variance, and less than 0.3g exchange. Cleaning and maintenance have been made a breeze with this model. A simple unscrewing of the collar grants access to the burrs for easy cleaning, ensuring the longevity and continued performance of the grinder. Including a 58mm dosing cup allows direct grinding into the cup or your portafilter, adding a touch of convenience to your coffee routine. With its sleek painted body, wooden lid, and premium feel that reflects its enhanced functionality, the DF64 GEN 2 Single Dose Coffee Grinder is not just a step but a leap forward in home coffee grinding technology.
he DF64 GEN 2 Single Dose Coffee Grinder is a remarkable blend of the manufacturer's cumulative insights from its earlier models, designed with a focus on delivering a superior grinding experience. At the heart of this grinder is a robust 250W motor, providing ample power to the 64mm DLC (Diamond-Like-Coating) burrs, ensuring precise and consistent grind sizes. The addition of a plasma generator significantly reduces static, a common annoyance in grinding, ensuring a smoother flow of coffee grounds through the exit chute. Among the notable upgrades is the built-in anti-popcorn lid, which, along with a metal dosing cup and metal funnel, enhances the single-dosing capability of this grinder. Only the exact amount of beans needed are ground, eliminating the chance of stale coffee and maintaining the freshness and flavour in every cup. The grinder's extremely low retention (ELR) feature ensures that almost all of your coffee ends up in the cup, not stuck in the grinder. It's particularly designed with espresso in mind, yet it shines in the pour-over range as well. The stepless micrometric adjustments offer unlimited grind size settings, allowing users to find the perfect grind size for their brewing method. It also ranks amongst the best grinders available on the market, with less than 1g of retention, 0.2g dose variance, and less than 0.3g exchange. Cleaning and maintenance have been made a breeze with this model. A simple unscrewing of the collar grants access to the burrs for easy cleaning, ensuring the longevity and continued performance of the grinder. Including a 58mm dosing cup allows direct grinding into the cup or your portafilter, adding a touch of convenience to your coffee routine. With its sleek painted body, wooden lid, and premium feel that reflects its enhanced functionality, the DF64 GEN 2 Single Dose Coffee Grinder is not just a step but a leap forward in home coffee grinding technology.
he DF64 GEN 2 Single Dose Coffee Grinder is a remarkable blend of the manufacturer's cumulative insights from its earlier models, designed with a focus on delivering a superior grinding experience. At the heart of this grinder is a robust 250W motor, providing ample power to the 64mm DLC (Diamond-Like-Coating) burrs, ensuring precise and consistent grind sizes. The addition of a plasma generator significantly reduces static, a common annoyance in grinding, ensuring a smoother flow of coffee grounds through the exit chute. Among the notable upgrades is the built-in anti-popcorn lid, which, along with a metal dosing cup and metal funnel, enhances the single-dosing capability of this grinder. Only the exact amount of beans needed are ground, eliminating the chance of stale coffee and maintaining the freshness and flavour in every cup. The grinder's extremely low retention (ELR) feature ensures that almost all of your coffee ends up in the cup, not stuck in the grinder. It's particularly designed with espresso in mind, yet it shines in the pour-over range as well. The stepless micrometric adjustments offer unlimited grind size settings, allowing users to find the perfect grind size for their brewing method. It also ranks amongst the best grinders available on the market, with less than 1g of retention, 0.2g dose variance, and less than 0.3g exchange. Cleaning and maintenance have been made a breeze with this model. A simple unscrewing of the collar grants access to the burrs for easy cleaning, ensuring the longevity and continued performance of the grinder. Including a 58mm dosing cup allows direct grinding into the cup or your portafilter, adding a touch of convenience to your coffee routine. With its sleek painted body, wooden lid, and premium feel that reflects its enhanced functionality, the DF64 GEN 2 Single Dose Coffee Grinder is not just a step but a leap forward in home coffee grinding technology.
in 2 offers
The lowest price for DF64 Gen 2 Single Dose Coffee Grinder with DLC Burrs - Black right now is $908.40 at AliExpress.com - AliExpress-226247430, compared across 2 retailers.
The all-time low was $585.00 on 18 June 2026 — today's price is 55% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 3 Sept 2026.
