The Easyshed S2308 Off The Wall Garden Shed can be fixed to a structure while offering a roomy interior for storing your various gardening equipment, making it a space-efficient solution for dense inner-city living areas.
The Easyshed S2308 Off The Wall Garden Shed can be fixed to a structure while offering a roomy interior for storing your various gardening equipment, making it a space-efficient solution for dense inner-city living areas.
in 2 offers
last seen 22 Sept 2026
The lowest price we last saw for Easyshed S2308 Off The Wall Garden Shed - Zincalume was $399.00 at EasyShed, compared across 2 retailers (last seen 22 Sept 2026). Prices may have changed since.
The all-time low we recorded was $309.00 on 5 Sept 2026.
Prices last updated 22 Sept 2026.
Easyshed S2308 Off The Wall Garden Shed - Zincalume
The Easyshed S2308 Off The Wall Garden Shed can be fixed to a structure while offering a roomy interior for storing your various gardening equipment, making it a space-efficient solution for dense inner-city living areas.
The Easyshed S2308 Off The Wall Garden Shed can be fixed to a structure while offering a roomy interior for storing your various gardening equipment, making it a space-efficient solution for dense inner-city living areas.
Last updated at 22/09/2026 23:48:06
2.25m x 0.78m Off The Wall Garden Shed - Zinc
Free delivery
Easyshed 3.75m x 0.78m Off The Wall
Free delivery
originally posted on easyshed.com.au
With limited room between a water tank and raised garden, this slim line shed is large enough to secure the mower, petrol cans, garden hose and sprinklers.Easy to put together if you take the time to follow instructions and lay parts out in front of you. Instructions are detailed and well written. I assembled it on my own over about 3 1/2 hours. For added strength, I removed the self-drilling screws, 3 at a time, drilled and replaced them with 5mm pop rivets. This made it so dimensionally stiff, I could stand inside and walk the whole thing over to its mounting pad without warping.Originally I wanted it in Monument colour to match the water tank, but this material is currently out of stock. The slate grey version ordered actually worked out better, blending into ... MoreWith limited room between a water tank and raised garden, this slim line shed is large enough to secure the mower, petrol cans, garden hose and sprinklers.Easy to put together if you take the time to follow instructions and lay parts out in front of you. Instructions are detailed and well written. I assembled it on my own over about 3 1/2 hours. For added strength, I removed the self-drilling screws, 3 at a time, drilled and replaced them with 5mm pop rivets. This made it so dimensionally stiff, I could stand inside and walk the whole thing over to its mounting pad without warping.Originally I wanted it in Monument colour to match the water tank, but this material is currently out of stock. The slate grey version ordered actually worked out better, blending into the fence and colour of garden foliage.I'm happy with my purchase knowing it was made of Australian steel and gave jobs to a semi-rural town. Quality it great, and priced well. The only downside is it took a while for the delivery to be consolidated and shipped into Sydney. But hey! it didn't cost me extra so a few days more was no issue. Delivered by a profession crew whom took it right up drive to ensure it was safe and out of sight.I'm waiting for the next big sale to buy a chicken coup version as my first easy-shed has worked out well.
originally posted on easyshed.com.au
Very happy with our choice of shed. This is a really good size to fit all our garden tools, fuel, mowers and wheel barrow.Building the panels was pretty straightforward, but I would recommend using a chock or wooden block of some kind when screwing the screws into the sheeting so that the screws can catch the sheeting more easily. Hanging the doors was also a bit tricky - make sure you leave the proper gaps as recommended so that when it’s all put together they swing free of each other!Instructions were pretty good too, although the channels with the cutouts in them weren’t clearly shown.It took a full day to construct, especially if there’s only 2 of you … and you really should have 4 people to do the final put together for a shed this size (it is the tall one ... MoreVery happy with our choice of shed. This is a really good size to fit all our garden tools, fuel, mowers and wheel barrow.Building the panels was pretty straightforward, but I would recommend using a chock or wooden block of some kind when screwing the screws into the sheeting so that the screws can catch the sheeting more easily. Hanging the doors was also a bit tricky - make sure you leave the proper gaps as recommended so that when it’s all put together they swing free of each other!Instructions were pretty good too, although the channels with the cutouts in them weren’t clearly shown.It took a full day to construct, especially if there’s only 2 of you … and you really should have 4 people to do the final put together for a shed this size (it is the tall one too).Now it’s up … super happy with it!!!
originally posted on easyshed.com.au
The company was easy to deal with. The delivery went well. All the parts were there as ordered. The instructions could do with a little refining as I suspect they have been drawn up on a desktop but never fully reviewed in the field eg: instruction say to "install the door panels when building walls" but should be "check the fit of the doors when building the wall panels but don't install the door panels before the shed is upright". Anyone with some smarts should be able to nut out the work arounds. We needed 3+ people plus for moving the large 6m x 2.4m panels around to avoid damage. It took a leisurely 4 days to build and install. Can easily be built by at least the semi-skilled. All in all very happy with this $2000 investment.
| Assembled size (approx. m) | 1.95 x 2.25 x 0.78 (H x W x D) |
| Door dimensions (approx. m) | 0.75 (W) |
| Country of origin | Australia |
2.25m x 0.78m Off The Wall Garden Shed - Zinc
Free delivery
Easyshed 3.75m x 0.78m Off The Wall
Free delivery
With limited room between a water tank and raised garden, this slim line shed is large enough to secure the mower, petrol cans, garden hose and sprinklers.Easy to put together if you take the time to follow instructions and lay parts out in front of you. Instructions are detailed and well written. I assembled it on my own over about 3 1/2 hours. For added strength, I removed the self-drilling screws, 3 at a time, drilled and replaced them with 5mm pop rivets. This made it so dimensionally stiff, I could stand inside and walk the whole thing over to its mounting pad without warping.Originally I wanted it in Monument colour to match the water tank, but this material is currently out of stock. The slate grey version ordered actually worked out better, blending into ... MoreWith limited room between a water tank and raised garden, this slim line shed is large enough to secure the mower, petrol cans, garden hose and sprinklers.Easy to put together if you take the time to follow instructions and lay parts out in front of you. Instructions are detailed and well written. I assembled it on my own over about 3 1/2 hours. For added strength, I removed the self-drilling screws, 3 at a time, drilled and replaced them with 5mm pop rivets. This made it so dimensionally stiff, I could stand inside and walk the whole thing over to its mounting pad without warping.Originally I wanted it in Monument colour to match the water tank, but this material is currently out of stock. The slate grey version ordered actually worked out better, blending into the fence and colour of garden foliage.I'm happy with my purchase knowing it was made of Australian steel and gave jobs to a semi-rural town. Quality it great, and priced well. The only downside is it took a while for the delivery to be consolidated and shipped into Sydney. But hey! it didn't cost me extra so a few days more was no issue. Delivered by a profession crew whom took it right up drive to ensure it was safe and out of sight.I'm waiting for the next big sale to buy a chicken coup version as my first easy-shed has worked out well.
Very happy with our choice of shed. This is a really good size to fit all our garden tools, fuel, mowers and wheel barrow.Building the panels was pretty straightforward, but I would recommend using a chock or wooden block of some kind when screwing the screws into the sheeting so that the screws can catch the sheeting more easily. Hanging the doors was also a bit tricky - make sure you leave the proper gaps as recommended so that when it’s all put together they swing free of each other!Instructions were pretty good too, although the channels with the cutouts in them weren’t clearly shown.It took a full day to construct, especially if there’s only 2 of you … and you really should have 4 people to do the final put together for a shed this size (it is the tall one ... MoreVery happy with our choice of shed. This is a really good size to fit all our garden tools, fuel, mowers and wheel barrow.Building the panels was pretty straightforward, but I would recommend using a chock or wooden block of some kind when screwing the screws into the sheeting so that the screws can catch the sheeting more easily. Hanging the doors was also a bit tricky - make sure you leave the proper gaps as recommended so that when it’s all put together they swing free of each other!Instructions were pretty good too, although the channels with the cutouts in them weren’t clearly shown.It took a full day to construct, especially if there’s only 2 of you … and you really should have 4 people to do the final put together for a shed this size (it is the tall one too).Now it’s up … super happy with it!!!
The company was easy to deal with. The delivery went well. All the parts were there as ordered. The instructions could do with a little refining as I suspect they have been drawn up on a desktop but never fully reviewed in the field eg: instruction say to "install the door panels when building walls" but should be "check the fit of the doors when building the wall panels but don't install the door panels before the shed is upright". Anyone with some smarts should be able to nut out the work arounds. We needed 3+ people plus for moving the large 6m x 2.4m panels around to avoid damage. It took a leisurely 4 days to build and install. Can easily be built by at least the semi-skilled. All in all very happy with this $2000 investment.
I really like the shed and was impressed by the protective packaging.With all the wind and rain lately, the panels were assembled in my garage and finally assembled in position yesterday. Final locking down and door hasp are still to be done.I found that the a slight change to the order of assembly and doing the roof first meant that i could use the shorter roof sheets (which were in top) first rather than double handling.Also thought a couple more picture/diagrams would have helped as i had difficulty getting the sheets to fit inside the wall channels. In the end I left part of the lip on the wall sheets protruding (and I should have worked harder to squeeze them all into the length of the channels.Similarly the instructions around installing the roof could ... MoreI really like the shed and was impressed by the protective packaging.With all the wind and rain lately, the panels were assembled in my garage and finally assembled in position yesterday. Final locking down and door hasp are still to be done.I found that the a slight change to the order of assembly and doing the roof first meant that i could use the shorter roof sheets (which were in top) first rather than double handling.Also thought a couple more picture/diagrams would have helped as i had difficulty getting the sheets to fit inside the wall channels. In the end I left part of the lip on the wall sheets protruding (and I should have worked harder to squeeze them all into the length of the channels.Similarly the instructions around installing the roof could have been expanded a little showing the positioning of the panels esp the overhand on the sides. I found it helpful to push the low side of the roof panel up against the side wall and used that to ensure the side wall was straight. This also gave a larger overhang on the high side for better weather protection. If the skillion roof shed was against a house wall then I expect roof position would need to line up flush against the high side wall.I am not sure how the bolt through brackets can be installed when the shed is installed against a house wall or fence - some self tapping screws might be a better option for the hard to reach locations.For the door some pictures around placement of the braces would have been helpful too.I hope these comments are helpful.
I would have given 4 1/2 stars if that was an option. The quality is excellent. The sheeting is a little thicker than most competitors, which makes it more solid once put together, and heaps of options on size, configuration and door types. Even though this is a small shed, once put together it feels solid and well-braced (no twisting or warping). Everything seems to be the right size. I like the thought put into subtle details, such as the bottom channel being (very) slightly higher on the inside to prevent water from overflowing into the shed interior. It's been through one heavy rain and no leaks at all.The '1/2 star' lost was really quite petty (but true). The corner detail for how the corrugated sheets overlap is not quite right and makes it a little difficult ... MoreI would have given 4 1/2 stars if that was an option. The quality is excellent. The sheeting is a little thicker than most competitors, which makes it more solid once put together, and heaps of options on size, configuration and door types. Even though this is a small shed, once put together it feels solid and well-braced (no twisting or warping). Everything seems to be the right size. I like the thought put into subtle details, such as the bottom channel being (very) slightly higher on the inside to prevent water from overflowing into the shed interior. It's been through one heavy rain and no leaks at all.The '1/2 star' lost was really quite petty (but true). The corner detail for how the corrugated sheets overlap is not quite right and makes it a little difficult to join the panels. It shows the 'large corrugation' as overlapping the small, however when you try to do as instructed, you realise that the panels are not alternate, and so it is impossible or all corners to be the same configuration. Anyone constructing one will know what I mean. However, overall, if I had to buy another shed, it would probably be an Easy Shed.
The shed is great. I didn't erect it immediately (the brother-in-law wasn't available to assist) but when we started, the first check was for the parts required - and disappointingly, the channel-joiners had been omitted from the packaging and so we had to fabricate using some channeling purchased from Bunnings.The response from the EasyShed team when I phoned to confirm how best to deal with the problem on the day (as we couldn't wait the several days for the delivery of the missing joiners) was very helpful, and appreciated.The shed has withstood some gusty wind and heavy rain, keeping the stored goods completely dry. Very pleased!The brother-in-law and myself attended to the majority of the work, with occasional steadying hands from our wives as required. They ... MoreThe shed is great. I didn't erect it immediately (the brother-in-law wasn't available to assist) but when we started, the first check was for the parts required - and disappointingly, the channel-joiners had been omitted from the packaging and so we had to fabricate using some channeling purchased from Bunnings.The response from the EasyShed team when I phoned to confirm how best to deal with the problem on the day (as we couldn't wait the several days for the delivery of the missing joiners) was very helpful, and appreciated.The shed has withstood some gusty wind and heavy rain, keeping the stored goods completely dry. Very pleased!The brother-in-law and myself attended to the majority of the work, with occasional steadying hands from our wives as required. They helped for a little more than an hour, over what was a ten-hour process (including anchoring the assembled shed to the pre-poured rebated concrete slab.
Went together well and looks rather smart. More landscaping and path to do but this will be a very smart, new, and very secure chook house for our two ladies (outdoor pen yet to be constructed). Not impossible for a single person to do and I am 71 years of age! I should also add that Mich at EasyShed was a great help during the ordering process, went very smoothly. Only reason it is not 5 stars (should be 4 1/2 stars but can’t do the half above) is that one panel (right hand side wall, rear panel - SA1R) was about 13mm short on the height of the front edge (the edge that meets and overlaps the back edge of the right hand side wall, front panel - SA2R). This resulted in the panel not going completely into the top U-Channel at that point. Height was OK on the back ... MoreWent together well and looks rather smart. More landscaping and path to do but this will be a very smart, new, and very secure chook house for our two ladies (outdoor pen yet to be constructed). Not impossible for a single person to do and I am 71 years of age! I should also add that Mich at EasyShed was a great help during the ordering process, went very smoothly. Only reason it is not 5 stars (should be 4 1/2 stars but can’t do the half above) is that one panel (right hand side wall, rear panel - SA1R) was about 13mm short on the height of the front edge (the edge that meets and overlaps the back edge of the right hand side wall, front panel - SA2R). This resulted in the panel not going completely into the top U-Channel at that point. Height was OK on the back edge of the SA1R (where it meets back wall SWR1) so I believe there is no loss of rigidity.
Simple to follow instructions. Easy enough to construct. The only negative is the fact that the sheets are not quite to dimension widthwise. This means that they don't match the channels due either to rolling tolerances or some relaxing in the bending of the ridges on the sheets. Not too much of an issue so long as you appreciate it, making sure the roof is at least as long as the font and back. Had to resort to compressing the door sheet to fit in the opening with some clamps so that the framing for the door was snug ast the corners. This meant and extra check to make sure the front panel was as long as the back. The cumulative effect was only about 15-20 mm on the length in total, but it was a little annoying not to match the channels neatly.
For the past two years we have searched for a way to make use of a large open space underneath a new deck. We talked to a roof plumber about creating an internal roof with guttering, but there was a series of complications (such as leaf waste and lack of roof accessibility directly under the deck).Finally we settled on the solution of a shed. EasyShed's wide range of sizes and options, not to mention its competitive price, won us over. Construction was just doable by one person, but panels any longer or taller would need two people. Drilling through the panels was tricky, but the instructions offer some good ideas for maintaining the stability of the panels for drilling. I recommend EasyShed makes and supplies its own 'hollow block' to make this task easier.We ... MoreFor the past two years we have searched for a way to make use of a large open space underneath a new deck. We talked to a roof plumber about creating an internal roof with guttering, but there was a series of complications (such as leaf waste and lack of roof accessibility directly under the deck).Finally we settled on the solution of a shed. EasyShed's wide range of sizes and options, not to mention its competitive price, won us over. Construction was just doable by one person, but panels any longer or taller would need two people. Drilling through the panels was tricky, but the instructions offer some good ideas for maintaining the stability of the panels for drilling. I recommend EasyShed makes and supplies its own 'hollow block' to make this task easier.We laid the rebated slab as recommended by EasyShed and are very happy we did. The wet concrete was delivered for less than $300. A good investment in our opinion. Delivery of the shed wasn't fast; it arrived on the 15th working day after ordering.We chose to use rivets rather than the supplied screws in many parts of the build, mainly so that we minimised sharp protrusions inside the shed. Everything fits together well and, so far, the shed seems to be completely waterproof. Flipping the door panel to locate it at the opposite end was easily achieved. EasyShed could perhaps make more of this design feature in its product descriptions.EasyShed has helped us unlock a large, previously unusable, space and was worth the money and effort!
I'm over the moon with this shed - it's great just what I wanted.Well it took a few weeks, but that was due to the weather and not enough hands available.I followed the instructions like a bible and they were great. Section by section I completed the back, sides and the roof, but the joining of all these sections had to wait till the weekend (no rain or wind) and an extra two hands for stabilization.My only concern being the "EICJ JOINS" COULD OF BEEN LONGER 400mm OR MORE because we had to carry the sections further than expected because of the limited work space at my place. The extra length would of stabilized the sections better. and also some more close up shots of the screws around the joins and the flush ends could of been some help in the video in stead of ... MoreI'm over the moon with this shed - it's great just what I wanted.Well it took a few weeks, but that was due to the weather and not enough hands available.I followed the instructions like a bible and they were great. Section by section I completed the back, sides and the roof, but the joining of all these sections had to wait till the weekend (no rain or wind) and an extra two hands for stabilization.My only concern being the "EICJ JOINS" COULD OF BEEN LONGER 400mm OR MORE because we had to carry the sections further than expected because of the limited work space at my place. The extra length would of stabilized the sections better. and also some more close up shots of the screws around the joins and the flush ends could of been some help in the video in stead of just saying want was required. Some closed up shot showing were the screws are on the final product would be nice, so we can see how we were progressing.All in all - _ I've got a great SHEDTHANK YOUPaul
| Assembled size (approx. m) | 1.95 x 2.25 x 0.78 (H x W x D) |
| Door dimensions (approx. m) | 0.75 (W) |
| Country of origin | Australia |
