Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected. Continuous self-test so you always know it’s working.Voltage detection range for wide application use - 90 V to 1000 V AC. Audible/Silent mode for added convenience.
Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected. Continuous self-test so you always know it’s working.Voltage detection range for wide application use - 90 V to 1000 V AC. Audible/Silent mode for added convenience.
Fluke 1AC II Non-contact Voltage Tester
Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected. Continuous self-test so you always know it’s working.Voltage detection range for wide application use - 90 V to 1000 V AC. Audible/Silent mode for added convenience.
Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected. Continuous self-test so you always know it’s working.Voltage detection range for wide application use - 90 V to 1000 V AC. Audible/Silent mode for added convenience.
in 17 offers
The lowest price for Fluke 1AC II Non-contact Voltage Tester right now is $57.14 at eBay.com.au, compared across 15 retailers.
The all-time low was $49.00 on 7 May 2026 — today's price is 17% above the lowest ever. That's a little above the best price we've seen.
Prices last updated 10 June 2026.
Last updated at 10/06/2026 08:12:40
GENUINE FLUKE 1AC II VOLTALERT Non Contact Voltage TESTER Detector Pen
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Fluke Flk-1aca1ii/apac (5293895) 90-1000v Volt Alert Stick
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Fluke 1AC II VoltAlert Non-Contact Voltage Tester, Pocket-Sized, 90-1000V AC, Audible
Delivery between 15–19 June $16.44
Fluke 1AC II VoltAlert Non-Contact Voltage Tester, Pocket-Sized, 90-1000V AC, Audible
Delivery between 14–18 June $15.48
Fluke 1AC II VoltAlert Non-Contact Voltage Tester, Pocket-Sized, 90-1000V AC, Audible Beeper, CAT IV Rating
Delivery between 16–19 June $29
Fluke 1AC II VoltAlert Non-Contact Voltage Tester, Pocket-Sized, 90-1000V AC, Audible
Delivery between 14–18 June $15.77
Fluke 1AC II Non-Contact Voltage Tester
Delivery between 15–17 June $15.95
FLUKE Non-Contact AC Voltage Tester REPVS
Delivery between 17–22 June $9.70
Fluke Non-Contact Voltage Tester AC 1000V - REPVS - Tool Kit Depot
Delivery between 17–22 June $10
Fluke FLK-1ACA1II/APAC (5293895) 90-1000V Volt Alert Stick
Delivery $9.70
originally posted on fluke.com
Purchased my first Fluke tester 30 years ago. I guess I got my moneys worth. Just replaced it. Great, reliable tester.
originally posted on fluke.com
I've been using this kind of pen tester for years and really is the only one I ever want to buy. However, recently when I dropped my tester, it got stuck in a weird setting where it beeps non-stop, making me not have any faith in the tester anymore. I need to be sure my equipment, especially my voltage detector is up to par. My only solution now is to buy a brand new one.I took off 2 stars, just for the fact that my tester malfunctioned because it was dropped. These testers need to have a better dropability, especially if its only from a height of 5 feet!
originally posted on fluke.com
I have had this unit for a good few years and it has always worked really well. Just this week, it stopped. Oddly, new batteries got the light flashing again, but it still does not detect live current at all now! Slightly worrying!I have decided to buy another one; we'll see how that one goes.
| Voltage sensing ranges | Nominally, 90 V AC to 1000 V AC |
| Detector tip style | Flat-tip |
| Light source | One high intensity red LED |
| Agency Approvals | |
| IP Rating | IP 40 |
GENUINE FLUKE 1AC II VOLTALERT Non Contact Voltage TESTER Detector Pen
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Fluke Flk-1aca1ii/apac (5293895) 90-1000v Volt Alert Stick
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Fluke 1AC II VoltAlert Non-Contact Voltage Tester, Pocket-Sized, 90-1000V AC, Audible
Delivery between 15–19 June $16.44
Fluke 1AC II VoltAlert Non-Contact Voltage Tester, Pocket-Sized, 90-1000V AC, Audible
Delivery between 14–18 June $15.48
Fluke 1AC II VoltAlert Non-Contact Voltage Tester, Pocket-Sized, 90-1000V AC, Audible Beeper, CAT IV Rating
Delivery between 16–19 June $29
Purchased my first Fluke tester 30 years ago. I guess I got my moneys worth. Just replaced it. Great, reliable tester.
I've been using this kind of pen tester for years and really is the only one I ever want to buy. However, recently when I dropped my tester, it got stuck in a weird setting where it beeps non-stop, making me not have any faith in the tester anymore. I need to be sure my equipment, especially my voltage detector is up to par. My only solution now is to buy a brand new one.I took off 2 stars, just for the fact that my tester malfunctioned because it was dropped. These testers need to have a better dropability, especially if its only from a height of 5 feet!
I have had this unit for a good few years and it has always worked really well. Just this week, it stopped. Oddly, new batteries got the light flashing again, but it still does not detect live current at all now! Slightly worrying!I have decided to buy another one; we'll see how that one goes.
I am a do-it yourselfer, but when it comes to electrical problems, I call a professional. That said, I investigate before calling in the cavalry, for example, I try to determine if current is flowing to the device. The VoltAlert helps me discover this without probing a wire connection. This is safer for me, My only suggestion would be to print on the tool what the blinking light signifies, versus the steady on + chime. Since I only use the VoltAlert a few times a year, I have to refer to the instructions to check my recollection of what the blinking light means.
This works perfectly fine with direct contact but unreliable with non-contact. I got shocked changing a garbage disposal switch because it was placed against the wire insulation and not the switch screws (which all of the cheaper brands I've owned was more than close enough) and gave me a false negative reading even though I had the wrong breaker off due to incorrect labeling in the panel. Fluke volt and multimeters are the best of the best but just a warning this needs direct contact for accuracy.
I have had this voltage tester for 3 months, and it has functioned properly the entire time. No battery replacement was need from occasional daily use during this period. It recently failed due to the tip breaking off in my pocket. This is not an every day carry item for the pocket
There are jobs where only Fluke is allowed to be used, why you may ask? Because thier the best.
I've had this tester for 4 years and have tried to take good care of it. I use it within its designed purpose and it hasn't failed me yet with false negatives like other testers may. Finally a few months ago the clilp broke on it in the winter, I believe because it became brittle from the cold. Other reviewers mention the tip breaking off. I have been careful of this but I have seen others with the same tester have it happen.I won't use a different tester though, this one is in my opinion the best, functionally.
I have tried many voltage detection tools over the 18 years of my career as an electrician (residential, industrial, commercial, maintenance), but Fluke makes the most accurate and durable one that I've ever used and I'll be sticking with it, since I bought my first one (earlier Fluke model) about 15 years ago.Many others are too sensitive and will light up as soon as it's inside of a junction box of live wires. With the Fluke 1AC, one can identify each live source with no problem; of course as voltage goes up, sensitivity does as well, but so it goes with any such tool. Some people complain about the tips breaking, but this has not been my experience, as I've dropped mine several times from about 3 feet, which has broken every other brand that I've bought.Being ... MoreI have tried many voltage detection tools over the 18 years of my career as an electrician (residential, industrial, commercial, maintenance), but Fluke makes the most accurate and durable one that I've ever used and I'll be sticking with it, since I bought my first one (earlier Fluke model) about 15 years ago.Many others are too sensitive and will light up as soon as it's inside of a junction box of live wires. With the Fluke 1AC, one can identify each live source with no problem; of course as voltage goes up, sensitivity does as well, but so it goes with any such tool. Some people complain about the tips breaking, but this has not been my experience, as I've dropped mine several times from about 3 feet, which has broken every other brand that I've bought.Being able to use the tool without the sound is great, as one can go about troubleshooting without distracting those who are around. The light flashes in intervals when not near a live source to let you that it's working, which is quite handy; however, always test on a known live source first.This IS NOT A LIFE SAFETY TOOL, this is a great TROUBLESHOOTING TOOL. If you are looking to save time and be more efficient before using your meter, I would recommend the Fluke 1AC to do so. Just avoid hard impacts and change the batteries regularly and you'll have this tool for quite some time.
batteries are always dead. now when I put new ones in all it does is beep constantly. this is my second and last one. there are other brands out there to consider. just out of the warranty by 2 months. store wont replace it
| Voltage sensing ranges | Nominally, 90 V AC to 1000 V AC |
| Detector tip style | Flat-tip |
| Light source | One high intensity red LED |
| Agency Approvals | |
| IP Rating | IP 40 |
