GearWrench 3/8" 120XP Flex Head Electronic Torque Wrench with Angle
Flexible with angle accuracy, this electronic torque wrench features a 3/8" drive size for precise fastening and a thin-profile flex head for narrow access. In addition, this torque allows users to digitally track and measure with a vibrating handle, buzzer, and LCD screen alert when it reaches the desired target.
Flexible with angle accuracy, this electronic torque wrench features a 3/8" drive size for precise fastening and a thin-profile flex head for narrow access. In addition, this torque allows users to digitally track and measure with a vibrating handle, buzzer, and LCD screen alert when it reaches the desired target.
Flexible with angle accuracy, this electronic torque wrench features a 3/8" drive size for precise fastening and a thin-profile flex head for narrow access. In addition, this torque allows users to digitally track and measure with a vibrating handle, buzzer, and LCD screen alert when it reaches the desired target.
Flexible with angle accuracy, this electronic torque wrench features a 3/8" drive size for precise fastening and a thin-profile flex head for narrow access. In addition, this torque allows users to digitally track and measure with a vibrating handle, buzzer, and LCD screen alert when it reaches the desired target.
in 10 offers
The lowest price for GearWrench 3/8" 120XP Flex Head Electronic Torque Wrench with Angle right now is $449.00 at Amazon.com.au, compared across 10 retailers.
The all-time low was $228.03 on 11 May 2026 — today's price is 97% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 10 June 2026.
Last updated at 10/06/2026 10:13:59
Gearwrench 85195 120XP Flex Head Electronic Torque Wrench with Angle, 3/8-Inch
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
GEARWRENCH 3/8" Drive 13.5-135Nm Flex-Head Electronic Torque Wrench with Angle 85195
Free delivery between 17–22 June
GEARWRENCH 85195 3/8" Drive 120XP Flex Head Electronic Torque Wrench With Angle
Free delivery
3/8" Drive 120XP Flex Head Electronic Torque Wrench with Angle - 85195
Free delivery between 19–24 June
Gearwrench Flex Head Electronic Torque wrench 3/8"" 85195
GearWrench 3/8†120XP Flex Head Electronic Torque Wrench 85195
Free delivery between 15–19 June
GEARWRENCH 3 8 Drive 13.5-135Nm Flex-Head Electronic Torque Wrench with Angle 85195
Delivery $20.50
GEARWRENCH 3/8" Drive 120XP Flex Head Electronic Torque Wrench with Angle - 85195
Delivery between 14–18 June $15.52
GearWrench 85195 3/8” 120XP Flex Head Electronic Torque Wrench with Angle
Delivery $22
Gearwrench 85195 Electronic Torque Wrench, Ratcheting, 3/8 Inch Drive
Delivery $63.17
originally posted on globaltestsupply.com
So far this torque wrench from Gearwrench works just as it is described. I like that it remembers your last setting. There seems to be three colors on the display. A nice teal type for the background and a green and red flashing color as you use the unit. Very easy to figure out how to use it. It beeps, vibrates and flashes colors as you approach your setting. So glad I purchased it.
originally posted on gearwrench.com
I purchased both the 3/8 and 1/4 drive version of this torque wrench and I've never wanted to throw a tool through a window so much in my life. I am not even the type to sit down and write a review , but I felt so compelled to stop any mechanic from making such a poor financial decision. These are the most unuseable electronic torque wrench in the industry. I have many as a shop owner and I supply tools for my techs, and I'm here to tell you not to waste your time. The electronics are so poorly executed. For one if you're trying to get on a tough fastener or injector hold down etc.. the torque wrench will shut off before you get it on there. The adjustment on it is a joke. You start going up in tenths then it will jump to whole lbs then 10lbs and you will run back ... MoreI purchased both the 3/8 and 1/4 drive version of this torque wrench and I've never wanted to throw a tool through a window so much in my life. I am not even the type to sit down and write a review , but I felt so compelled to stop any mechanic from making such a poor financial decision. These are the most unuseable electronic torque wrench in the industry. I have many as a shop owner and I supply tools for my techs, and I'm here to tell you not to waste your time. The electronics are so poorly executed. For one if you're trying to get on a tough fastener or injector hold down etc.. the torque wrench will shut off before you get it on there. The adjustment on it is a joke. You start going up in tenths then it will jump to whole lbs then 10lbs and you will run back and forth missing the torque spec you're trying to set it at every time. Not to mention if you forget to hit the set button. As far as I can tell there are no memory settings which is frustrating. Perhaps the worst bit about it is using it. Lets say you have an injector hold down at 89in lbs. You pull nice and slow and it starts vibrating at say 87 in lb. You keep pulling slower and you think man when is it going to get there, so you let off and start your pull again only to find that you are way past your torque. Getting my money back on these would not be enough to cover the headache and again disappointment. On top of that , where do you even get these crappy tools warrantied? Allow me to re-iterate. >>>>DO NOT BUY THESE<<<< They don't work!
originally posted on gearwrench.com
This wrench will give you a solid beep ABOVE the set torque, around 5% over. Totally defeats the purpose of a torque wrench. I thought it was a defect so bought a replacement. Same problem. Not sure who designed it, but very poor execution.
| Variant | |
| title | Default Title |
Gearwrench 85195 120XP Flex Head Electronic Torque Wrench with Angle, 3/8-Inch
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
GEARWRENCH 3/8" Drive 13.5-135Nm Flex-Head Electronic Torque Wrench with Angle 85195
Free delivery between 17–22 June
GEARWRENCH 85195 3/8" Drive 120XP Flex Head Electronic Torque Wrench With Angle
Free delivery
3/8" Drive 120XP Flex Head Electronic Torque Wrench with Angle - 85195
Free delivery between 19–24 June
Gearwrench Flex Head Electronic Torque wrench 3/8"" 85195
So far this torque wrench from Gearwrench works just as it is described. I like that it remembers your last setting. There seems to be three colors on the display. A nice teal type for the background and a green and red flashing color as you use the unit. Very easy to figure out how to use it. It beeps, vibrates and flashes colors as you approach your setting. So glad I purchased it.
I purchased both the 3/8 and 1/4 drive version of this torque wrench and I've never wanted to throw a tool through a window so much in my life. I am not even the type to sit down and write a review , but I felt so compelled to stop any mechanic from making such a poor financial decision. These are the most unuseable electronic torque wrench in the industry. I have many as a shop owner and I supply tools for my techs, and I'm here to tell you not to waste your time. The electronics are so poorly executed. For one if you're trying to get on a tough fastener or injector hold down etc.. the torque wrench will shut off before you get it on there. The adjustment on it is a joke. You start going up in tenths then it will jump to whole lbs then 10lbs and you will run back ... MoreI purchased both the 3/8 and 1/4 drive version of this torque wrench and I've never wanted to throw a tool through a window so much in my life. I am not even the type to sit down and write a review , but I felt so compelled to stop any mechanic from making such a poor financial decision. These are the most unuseable electronic torque wrench in the industry. I have many as a shop owner and I supply tools for my techs, and I'm here to tell you not to waste your time. The electronics are so poorly executed. For one if you're trying to get on a tough fastener or injector hold down etc.. the torque wrench will shut off before you get it on there. The adjustment on it is a joke. You start going up in tenths then it will jump to whole lbs then 10lbs and you will run back and forth missing the torque spec you're trying to set it at every time. Not to mention if you forget to hit the set button. As far as I can tell there are no memory settings which is frustrating. Perhaps the worst bit about it is using it. Lets say you have an injector hold down at 89in lbs. You pull nice and slow and it starts vibrating at say 87 in lb. You keep pulling slower and you think man when is it going to get there, so you let off and start your pull again only to find that you are way past your torque. Getting my money back on these would not be enough to cover the headache and again disappointment. On top of that , where do you even get these crappy tools warrantied? Allow me to re-iterate. >>>>DO NOT BUY THESE<<<< They don't work!
This wrench will give you a solid beep ABOVE the set torque, around 5% over. Totally defeats the purpose of a torque wrench. I thought it was a defect so bought a replacement. Same problem. Not sure who designed it, but very poor execution.
I love the features and accuracy of this wrench. Good luck using it on a vehicle. I've tried giving it a chance for over 6 months now. I'm writing this because I'm so frustrated with it. It took 6 tries to get the wrench on and try to torque the bolt before it shuts itself off. On a easy to get at bolt like a tire lug, you will be lucky to get more then one bolt torqued before it shuts off. What a pain. I had to go back to my 30 year old click type Craftsman unit to finish my job.
I returned tons of "precision"torque wrenches because they were off by to much.This one is spot-on. I work on my motorcycles and very often on my buddies bikes as well. Torque specifications are much lower then in the auto-world and precision is key for a safe ride. Imagine the brake lever falling off, if not torqued enough, or not releasing the brake if torqued to strong (just an example)... Forget everything which is sold for less then $150 in the 2-30 Nm, it will be a waste of time or a hazard. There are different high end options out there, and this is one of them. Also, for what it does, it does NOT brake the bank - actually it's cheap compared to similar precision wrenches.
I will start with what i don't like, I am very old school, I still like the click type, its distinct and noticeable, you got to be so out of it to over shoot the torque setting. The new digital ones, yes it vibrates, yes LCD screen changes color, but the vibration is not as noticeable, ( too soft ), yes it beeps, if your working environment is not quite, you are likely to miss the beep, and could lead over torque, specially ones require lesser of torque.. this is the only complaint I have..for this matter its one star off... Here are the things I like I specially like the price, way cheaper compair to ones sell from tool truck.. I like the accuracy of this tool, along with the flex head. I think this is a key aspect of a precision instrument. I like the fine tooth ... MoreI will start with what i don't like, I am very old school, I still like the click type, its distinct and noticeable, you got to be so out of it to over shoot the torque setting. The new digital ones, yes it vibrates, yes LCD screen changes color, but the vibration is not as noticeable, ( too soft ), yes it beeps, if your working environment is not quite, you are likely to miss the beep, and could lead over torque, specially ones require lesser of torque.. this is the only complaint I have..for this matter its one star off... Here are the things I like I specially like the price, way cheaper compair to ones sell from tool truck.. I like the accuracy of this tool, along with the flex head. I think this is a key aspect of a precision instrument. I like the fine tooth gear rachet head, I like the aluminum handle, its grippy its solid. I like it can do all the conversion from ft lb to inch lb to Nm, of course within the minimum and maximum capacity of the torque wrench. I like it degree setting is also be able to achieve by few press of buttons. I also like It comes with a nice storage box, I take battery out each time I using it for that day.. Over all I like it.
Its got a nice feel, seems accurate. But the description made it seem like the handle telescopes. It does not. And you have to hold the power button excessively long. When doing angles, the reset is very slow unless you hit clear between readings. Fast resetting when doing torque. lots of options on different units of torque. I wish it went a little lower and higher, but then just gotta break out the 3/4 or 3/8 torque wrench. Not quite as good as snap on but a lot cheaper
Its well worth more than the $200 price tag just for the angle and flex head features. I purchased the 1/2 model, and its long, but not awkward. It lets you reset while still retaining the current angle, its perfect for inside engine bays that will not would allow you to get one pull of 90 degrees, or so. You can do multiple pulls, and it adds then saves them even when hitting the bolt from different angles. I scribed all my bolts, and purposely put this tool in awkward situations. All my bolts are dead on at a final pass of 70 degrees. Has a ton of alerts and a very accurate LCD to let you know where the degree is. Handle vibrates, the screen flashes, and the buzzer is very noticeable. Compared to my snap on, this is light years ahead. Also I bought the non-flex ... MoreIts well worth more than the $200 price tag just for the angle and flex head features. I purchased the 1/2 model, and its long, but not awkward. It lets you reset while still retaining the current angle, its perfect for inside engine bays that will not would allow you to get one pull of 90 degrees, or so. You can do multiple pulls, and it adds then saves them even when hitting the bolt from different angles. I scribed all my bolts, and purposely put this tool in awkward situations. All my bolts are dead on at a final pass of 70 degrees. Has a ton of alerts and a very accurate LCD to let you know where the degree is. Handle vibrates, the screen flashes, and the buzzer is very noticeable. Compared to my snap on, this is light years ahead. Also I bought the non-flex head model, while it wasnt bad, I could never recommend it when this is only $50 more. That doesnt do angles.
This torque wrench is awesome, made rebuilding a Subaru engine so much easier. For any application requiring torque to angle specs this wrench makes it a breeze. The controls are simple to learn and will have you up and running in minutes. It is a robust design and the flex head is wonderful in tight spaces. I originally wanted the 3/8 size but hard a hard time finding one so I got the bigger 1/2. I just use my old torque wrench for settings less than 20 ft lbs. It being a precision instrument with electronics I would say keep it dry and in a good environment to make it last for years. Also take out the batteries if left unused for a long time as a leaking battery could cause damage.
Yeah this thing is weird, one second it is great and then the next bolt I go to torque it randomly shuts its self off and then I have to turn it back on and reset the torque. I'm using it the correct way as stated in the manual and it still randomly shuts off while torquing. I should have just bought the snap on that goes to 300 ftlbs instead. If it didn't have this problem I would say it is the same quality at half the cost - but that is not the case.
| Variant | |
| title | Default Title |
