Last updated at 02/11/2026 09:15:07
Kincrome 1,850kg Ratchet Jack Stand - Pair
Kincrome 1,850kg Ratchet Jack Stand - Pair
Delivery $12
Kincrome Ratchet Jack Stand 1850 kg
Same-day delivery $10
Kincrome 1,850kg Ratchet Jack Stand - Pair
Delivery $10
Kincrome Car Stands Ratchet 1850kg Pair
Delivery between 5–10 Nov $12.99
Kincrome 1,850kg Ratchet Jack Stand - Pair
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
originally posted on bunnings.co.nz
The top teeth on this stand slip easily and if you bump or shake the stand you might end up collapsing the stand and crushing yourself. Might be a bad batch but don’t take the chance, buy a stand with pins and avoid injury or death. These should be recalled. Look at the Harbor Freight jack stand recall the same problem occurs with this model.
originally posted on supercheapauto.com.au
These Jack Stands work well for holding up my Suzuki. Well built, no issues. I most certainly reccomend them.Note the tops are fairly big, they may not fit inbetween the plastic cutouts designated around your cars pinch welds. Measure before you buy.
originally posted on supercheapauto.com.au
High Quality and thick steel Jacks - Prefer the ones with the locking Pins for added safety, but content using these for the rear and the locking pin ones for the front (especially if you are working under the front of the car!). Great product though and nice and high standing for my Triton which has higher jacking points etc
| Load Capacity | 1850 kg |
| Compatible Vehicle Type | Car |
| Product Type | Car Stands |
| Product Subtype | Car Stands |
| Lifting Height | 95 mm |
Kincrome 1,850kg Ratchet Jack Stand - Pair
Kincrome 1,850kg Ratchet Jack Stand - Pair
Delivery $12
Kincrome Ratchet Jack Stand 1850 kg
Same-day delivery $10
Kincrome 1,850kg Ratchet Jack Stand - Pair
Delivery $10
Kincrome Car Stands Ratchet 1850kg Pair
Delivery between 5–10 Nov $12.99
The top teeth on this stand slip easily and if you bump or shake the stand you might end up collapsing the stand and crushing yourself. Might be a bad batch but don’t take the chance, buy a stand with pins and avoid injury or death. These should be recalled. Look at the Harbor Freight jack stand recall the same problem occurs with this model.
These Jack Stands work well for holding up my Suzuki. Well built, no issues. I most certainly reccomend them.Note the tops are fairly big, they may not fit inbetween the plastic cutouts designated around your cars pinch welds. Measure before you buy.
High Quality and thick steel Jacks - Prefer the ones with the locking Pins for added safety, but content using these for the rear and the locking pin ones for the front (especially if you are working under the front of the car!). Great product though and nice and high standing for my Triton which has higher jacking points etc
Good quality heavy stands. More confident working under heavy cars with these supporting it. Price is cheaper than getting crushed.
Excellent quality, a little heavier duty than the SCA version I also have. Happy to pay the tiny bit extra to have piece of mind when your life is at stake while working under your ride!The vertical cast posts are also captive so they can’t be lost, nice little extra.
Great jack stands, good quality for the price.The ratchet mechanism makes life a lot easier.
Pins wont save you life. Compared to other examples the locking pins simply stop the unit from lifting further than set. They aren't a redundancy. They are exactly the same as the previous model but with a lock that stops you from lifting the jack higher than set. (Good for carrying) Useless as a redundancy. Buy the previous unit as they are the same but cheaper.
Very good, the only thing is that it would be nice if they went slightly higher but I got around that by using some plywood underneath for a little more height.
Purchased some stands for jacking items for safety and they well really weel are very sturdy and solid.
Excellent Product - The locking Pin really gives you piece of mind. Using these under the front of my vehicles and the non-locking pins ones at the back. Great sturdy unit and thick steel too
| Load Capacity | 1850 kg |
| Compatible Vehicle Type | Car |
| Product Type | Car Stands |
| Product Subtype | Car Stands |
| Lifting Height | 95 mm |
Kincrome 1,850kg Stand Ratchet Jack - Pair
The Kincrome Car Stands Ratchet 1850kg Pair is designed to support vehicles safely during underbody work in home and professional workshops. Also known as axle stands, each stand carries a working load limit of 1,850kg and adjusts between 293mm and 390mm, with a patented ratchet mechanism that sets height quickly so the vehicle spends less time suspended on the jack. The stands comply with the Australian mandatory standard AS 2538:2016 and feature a deep saddle with reinforced shaft for secure contact under vehicles. Car stands like these are precision machine-welded from heavy duty steel for strength under load, while a two tone matte black and blue powder coating resists corrosion and abrasion damage. Sold as a pair, they are intended to be used together to support a vehicle evenly.
The Kincrome Car Stands Ratchet 1850kg Pair is designed to support vehicles safely during underbody work in home and professional workshops. Also known as axle stands, each stand carries a working load limit of 1,850kg and adjusts between 293mm and 390mm, with a patented ratchet mechanism that sets height quickly so the vehicle spends less time suspended on the jack. The stands comply with the Australian mandatory standard AS 2538:2016 and feature a deep saddle with reinforced shaft for secure contact under vehicles. Car stands like these are precision machine-welded from heavy duty steel for strength under load, while a two tone matte black and blue powder coating resists corrosion and abrasion damage. Sold as a pair, they are intended to be used together to support a vehicle evenly.
The Kincrome Car Stands Ratchet 1850kg Pair is designed to support vehicles safely during underbody work in home and professional workshops. Also known as axle stands, each stand carries a working load limit of 1,850kg and adjusts between 293mm and 390mm, with a patented ratchet mechanism that sets height quickly so the vehicle spends less time suspended on the jack. The stands comply with the Australian mandatory standard AS 2538:2016 and feature a deep saddle with reinforced shaft for secure contact under vehicles. Car stands like these are precision machine-welded from heavy duty steel for strength under load, while a two tone matte black and blue powder coating resists corrosion and abrasion damage. Sold as a pair, they are intended to be used together to support a vehicle evenly.
The Kincrome Car Stands Ratchet 1850kg Pair is designed to support vehicles safely during underbody work in home and professional workshops. Also known as axle stands, each stand carries a working load limit of 1,850kg and adjusts between 293mm and 390mm, with a patented ratchet mechanism that sets height quickly so the vehicle spends less time suspended on the jack. The stands comply with the Australian mandatory standard AS 2538:2016 and feature a deep saddle with reinforced shaft for secure contact under vehicles. Car stands like these are precision machine-welded from heavy duty steel for strength under load, while a two tone matte black and blue powder coating resists corrosion and abrasion damage. Sold as a pair, they are intended to be used together to support a vehicle evenly.
in 6 offers
The lowest price for Kincrome 1,850kg Stand Ratchet Jack - Pair right now is $87.19 at Click Frenzy, compared across 6 retailers.
The all-time low was $55.88 on 29 July 2025 — today's price is 56% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 2 Nov 2026.
