Buy wisely
Buy wiselyBuy wisely
For RetailersFor developers
  1. Home
  2. Home Improvement & Garden
  3. DIY Tools & Supplies
  4. Fasteners & Fixings
  5. M20 x 300mm Stainless A4-70 G316 Hook & Hook Turnbuckles
Buy wisely

BuyWisely is your one stop price comparison platform, delivering the best deals from over 20,000 online shops. We empower shoppers to make smart, cost-effective choices by offering transparent pricing, price history, and the latest deals across a broad range of products. With BuyWisely, your money goes further.

Popular Shops
JB Hi-Fi
The Good Guys
Harvey Norman
Appliances Online
Bing Lee
Kogan
Amazon
Officeworks
Contact Us
[email protected]
Affiliate Disclosure
Legal Information
Privacy Policy
Logos provided by Logo.dev
Β© 2026 BuyWiselyβ€’Price data powered by pricesAPI.ioβ€’Retailers: SellWisely.io
M20 x 300mm Stainless A4-70 G316 Hook & Hook Turnbuckles
M20 x 300mm Stainless A4-70 G316 Hook & Hook Turnbuckles
M20 x 300mm Stainless A4-70 G316 Hook & Hook Turnbuckles
M20 x 300mm Stainless A4-70 G316 Hook & Hook Turnbuckles

M20 x 300mm Stainless A4-70 G316 Hook & Hook Turnbuckles

$88.00

last seen 14 May 2026
(4 reviews)

Hook & Hook Turnbuckles are specifically suited for adjusting the tension and length of stainless steel wire rope balustrade systems and for other tensioning methods. Hook end fitting is used to create temporary connections because they are easy to quickly connect and disconnect. They should never be used in connections where tension could unexpectedly release Benefits / Features: Used to adjust tension and reduce slack in a rope cable or similar tensioning assembly. Can be used on its own or in conjunction with other turnbuckles to increase length in the assembly. ASME B30.26 - Rigging Hardware defines a turnbuckle as β€œan adjustable device consisting of three primary components: a body a right-hand threaded end fitting and a left-hand threaded end fitting.” Testing and Breaking Load: It is the Purchasers responsibility to determine whether the testing procedure and breaking load is suitable for purpose Material / Coating: Marine Grade Stainless Steel A4-70 G316 is the ultimate corrosion resistance fastener. Designed to be used in all conditions. It is the best material for marine coastal chemical and food environments. Stainless steels are largely non-magnetic but it is not uncommon for stainless steel fasteners to show a small degree of magnetism. This is partly due to the work-hardening of the product during the manufacturing process. Marine Grade Stainless Steel A4-70 G316 can be easily identified by the following markings: A4 A4-70 A4-80 316 or G316 Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material Seizing Binding or Galling?: All Threads will seize under high tension. It is a well-known and accepted problem especially when using Stainless Steel or other alloys such as aluminium etc. As pressure builds between the contacting and sliding surfaces protective oxides are broken possibly wiped off and interface metal high points shear or lock together. This cumulative clogging-shearing-locking action causes increasing adhesion. In the extreme galling leads to seizing (the actual freezing together of the threads). If tightening is continued the fastener can be twisted off or its threads ripped out. The frequency of threads seizing can be reduced by using anti-seize compounds but not eliminated. There are also other ways to minimize the occurrence of thread seizing Keep the thread clean and away from dirt and grit etc. Tighten the thread slowly. Work them back and forth occasionally to feel if it is tight when loosening. If the thread starts to feel like it is heating up it is because the metal threads are rubbing against each other under high tension. This can be an early sign that it may seize due to overloading. It may be that you need to go up a size to reduce the overloading. Seizing is not a product fault but is the nature of Stainless Steel material Thread Pitch (Metric): Pitch means the distance between the peaks of two threads along a screw bolt or fastener expressed in millimetres (mm). Used when referring to Metric parts. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.

Hook & Hook Turnbuckles are specifically suited for adjusting the tension and length of stainless steel wire rope balustrade systems and for other tensioning methods. Hook end fitting is used to create temporary connections because they are easy to quickly connect and disconnect. They should never be used in connections where tension could unexpectedly release Benefits / Features: Used to adjust tension and reduce slack in a rope cable or similar tensioning assembly. Can be used on its own or in conjunction with other turnbuckles to increase length in the assembly. ASME B30.26 - Rigging Hardware defines a turnbuckle as β€œan adjustable device consisting of three primary components: a body a right-hand threaded end fitting and a left-hand threaded end fitting.” Testing and Breaking Load: It is the Purchasers responsibility to determine whether the testing procedure and breaking load is suitable for purpose Material / Coating: Marine Grade Stainless Steel A4-70 G316 is the ultimate corrosion resistance fastener. Designed to be used in all conditions. It is the best material for marine coastal chemical and food environments. Stainless steels are largely non-magnetic but it is not uncommon for stainless steel fasteners to show a small degree of magnetism. This is partly due to the work-hardening of the product during the manufacturing process. Marine Grade Stainless Steel A4-70 G316 can be easily identified by the following markings: A4 A4-70 A4-80 316 or G316 Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material Seizing Binding or Galling?: All Threads will seize under high tension. It is a well-known and accepted problem especially when using Stainless Steel or other alloys such as aluminium etc. As pressure builds between the contacting and sliding surfaces protective oxides are broken possibly wiped off and interface metal high points shear or lock together. This cumulative clogging-shearing-locking action causes increasing adhesion. In the extreme galling leads to seizing (the actual freezing together of the threads). If tightening is continued the fastener can be twisted off or its threads ripped out. The frequency of threads seizing can be reduced by using anti-seize compounds but not eliminated. There are also other ways to minimize the occurrence of thread seizing Keep the thread clean and away from dirt and grit etc. Tighten the thread slowly. Work them back and forth occasionally to feel if it is tight when loosening. If the thread starts to feel like it is heating up it is because the metal threads are rubbing against each other under high tension. This can be an early sign that it may seize due to overloading. It may be that you need to go up a size to reduce the overloading. Seizing is not a product fault but is the nature of Stainless Steel material Thread Pitch (Metric): Pitch means the distance between the peaks of two threads along a screw bolt or fastener expressed in millimetres (mm). Used when referring to Metric parts. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.

M20 x 300mm Stainless A4-70 G316 Hook & Hook Turnbuckles

(4 reviews)

Hook & Hook Turnbuckles are specifically suited for adjusting the tension and length of stainless steel wire rope balustrade systems and for other tensioning methods. Hook end fitting is used to create temporary connections because they are easy to quickly connect and disconnect. They should never be used in connections where tension could unexpectedly release Benefits / Features: Used to adjust tension and reduce slack in a rope cable or similar tensioning assembly. Can be used on its own or in conjunction with other turnbuckles to increase length in the assembly. ASME B30.26 - Rigging Hardware defines a turnbuckle as β€œan adjustable device consisting of three primary components: a body a right-hand threaded end fitting and a left-hand threaded end fitting.” Testing and Breaking Load: It is the Purchasers responsibility to determine whether the testing procedure and breaking load is suitable for purpose Material / Coating: Marine Grade Stainless Steel A4-70 G316 is the ultimate corrosion resistance fastener. Designed to be used in all conditions. It is the best material for marine coastal chemical and food environments. Stainless steels are largely non-magnetic but it is not uncommon for stainless steel fasteners to show a small degree of magnetism. This is partly due to the work-hardening of the product during the manufacturing process. Marine Grade Stainless Steel A4-70 G316 can be easily identified by the following markings: A4 A4-70 A4-80 316 or G316 Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material Seizing Binding or Galling?: All Threads will seize under high tension. It is a well-known and accepted problem especially when using Stainless Steel or other alloys such as aluminium etc. As pressure builds between the contacting and sliding surfaces protective oxides are broken possibly wiped off and interface metal high points shear or lock together. This cumulative clogging-shearing-locking action causes increasing adhesion. In the extreme galling leads to seizing (the actual freezing together of the threads). If tightening is continued the fastener can be twisted off or its threads ripped out. The frequency of threads seizing can be reduced by using anti-seize compounds but not eliminated. There are also other ways to minimize the occurrence of thread seizing Keep the thread clean and away from dirt and grit etc. Tighten the thread slowly. Work them back and forth occasionally to feel if it is tight when loosening. If the thread starts to feel like it is heating up it is because the metal threads are rubbing against each other under high tension. This can be an early sign that it may seize due to overloading. It may be that you need to go up a size to reduce the overloading. Seizing is not a product fault but is the nature of Stainless Steel material Thread Pitch (Metric): Pitch means the distance between the peaks of two threads along a screw bolt or fastener expressed in millimetres (mm). Used when referring to Metric parts. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.

Hook & Hook Turnbuckles are specifically suited for adjusting the tension and length of stainless steel wire rope balustrade systems and for other tensioning methods. Hook end fitting is used to create temporary connections because they are easy to quickly connect and disconnect. They should never be used in connections where tension could unexpectedly release Benefits / Features: Used to adjust tension and reduce slack in a rope cable or similar tensioning assembly. Can be used on its own or in conjunction with other turnbuckles to increase length in the assembly. ASME B30.26 - Rigging Hardware defines a turnbuckle as β€œan adjustable device consisting of three primary components: a body a right-hand threaded end fitting and a left-hand threaded end fitting.” Testing and Breaking Load: It is the Purchasers responsibility to determine whether the testing procedure and breaking load is suitable for purpose Material / Coating: Marine Grade Stainless Steel A4-70 G316 is the ultimate corrosion resistance fastener. Designed to be used in all conditions. It is the best material for marine coastal chemical and food environments. Stainless steels are largely non-magnetic but it is not uncommon for stainless steel fasteners to show a small degree of magnetism. This is partly due to the work-hardening of the product during the manufacturing process. Marine Grade Stainless Steel A4-70 G316 can be easily identified by the following markings: A4 A4-70 A4-80 316 or G316 Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material Seizing Binding or Galling?: All Threads will seize under high tension. It is a well-known and accepted problem especially when using Stainless Steel or other alloys such as aluminium etc. As pressure builds between the contacting and sliding surfaces protective oxides are broken possibly wiped off and interface metal high points shear or lock together. This cumulative clogging-shearing-locking action causes increasing adhesion. In the extreme galling leads to seizing (the actual freezing together of the threads). If tightening is continued the fastener can be twisted off or its threads ripped out. The frequency of threads seizing can be reduced by using anti-seize compounds but not eliminated. There are also other ways to minimize the occurrence of thread seizing Keep the thread clean and away from dirt and grit etc. Tighten the thread slowly. Work them back and forth occasionally to feel if it is tight when loosening. If the thread starts to feel like it is heating up it is because the metal threads are rubbing against each other under high tension. This can be an early sign that it may seize due to overloading. It may be that you need to go up a size to reduce the overloading. Seizing is not a product fault but is the nature of Stainless Steel material Thread Pitch (Metric): Pitch means the distance between the peaks of two threads along a screw bolt or fastener expressed in millimetres (mm). Used when referring to Metric parts. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.

$88.00 - $88.00

in 4 offers

last seen 14 May 2026

The lowest price we last saw for M20 x 300mm Stainless A4-70 G316 Hook & Hook Turnbuckles was $88.00 at eBay.com.au, compared across 2 retailers (last seen 14 May 2026). Prices may have changed since.

The all-time low we recorded was $66.00 on 18 Oct 2024.

Prices last updated 14 May 2026.

Size:

M04 x 55mm
M06 x 90mm
M08 x 120mm
M10 x 150 mm
M12 x 200 mm
M16 x 250 mm
M20 x 300 mm

Price comparison

Price data powered by pricesAPI.io

Last updated at 14/05/2026 17:52:51

Please note: price history and price alerts are not available for some stores, including Amazon.com.au.
https://www.google.com/s2/favicons?domain=ebay.com.au&sz=64eBay.com.au

$88.00

M20 X 300mm Stainless Steel A4-70 G316 Hook & Hook Turnbuckles

Free delivery

Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!

https://www.google.com/s2/favicons?domain=boltandnut.com.au&sz=64Bolt & Nut Australia

$88.00

M20 x 300mm Stainless A4-70 G316 Hook & Hook Turnbuckles

Free same-day delivery

Price history

Price history

Please note: price history and price alerts are not available for some stores, including Amazon.com.au.

Specification

SizeM20 (20mm)
Thread typeMetric - Coarse
Product TypesHook | Hook Turnbuckle
System of MeasurementMetric
Head TypeHook

Price comparison

Updated 6 months ago
Please note: price history and price alerts are not available for some stores, including Amazon.com.au.
https://www.google.com/s2/favicons?domain=ebay.com.au&sz=64
eBay.com.au

$88.00

M20 X 300mm Stainless Steel A4-70 G316 Hook & Hook Turnbuckles

Free delivery

Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!

https://www.google.com/s2/favicons?domain=boltandnut.com.au&sz=64
Bolt & Nut Australia

$88.00

M20 x 300mm Stainless A4-70 G316 Hook & Hook Turnbuckles

Free same-day delivery

Price history

Price history

Please note: price history and price alerts are not available for some stores, including Amazon.com.au.

Specification

SizeM20 (20mm)
Thread typeMetric - Coarse
Product TypesHook | Hook Turnbuckle
System of MeasurementMetric
Head TypeHook

You may also like

Austlift Stainless Steel TurnBuckle Hook/Eye G316 6 mm
Austlift Stainless Steel TurnBuckle Hook/Eye G316 6 mm$5.11 - $9.50
Compare 5 offers