Martec Profile Plus 2 3-in-1 Bathroom Heater with Exhaust Fan - Silver

The heat lamps are amazing. Very warm. We didn't have the electrician hook up the fan as we already had an exhaust fan above the shower. Looks good.

Fan draws moisture out of the room well and fast, The heatlamp gives off an instant slight warmth but the Lights despite having 3 it is not so bright and doesn't have a wide spread which I find important

Just had this 3 in 1 bathroom heater/fan installed and it works like a dream, i have high ceilings but it still manages to remove the steam.Very happy

A BRIGHT IDEA

The Lighting Outlet had exactly what we were looking, at the right price - and delivery time. A very smooth transation and we would definitely purchase from them again.

Great product

Great product. Good price. Excellent delivery. Easy to instal when replacing a like-for-like product

Perfect! Looks great and a reasonable price

We needed to replace a failed bathroom exhaust fan/heater. This model was perfect. It looks great, it works well and the 3 LED lights provide perfect lighting for out bathroom.

Poor exhaust

Unfortunately the fan exhaust in very inferior, and nowhere near expected based on the specifications. We will need to install a separate exhaust fan to remove the steam, and the unit is only installed in a relatively small ensuite. We replaced a 15 year old IXL which we thought was worn out; in reality it performed much better. Lights and heating are fine. Fan is quiet, but that's because it doesn't do anything!

Pretty neat unit with some drawbacks

Neatly manufactured unit with adequate installation guide.The two spring-type clamping devices fitted to the two shorter sides of the housing are pathetic as any ceiling material thicker or thinner than standard Gypsum board will not be accommodated. Supplementary holes in the body theoretically allow screws to improve fixing but are also quite useless being right on the edge of the opening. Potentially the overall mechanical fixing of the unit could be far from optimal. The optional single heater fitting has a far superior clamping system making for easy and safe mounting. Electrical diagram, instructions and quality are excellent.Although the heater and light globes are directionally fixed, it would be very practical to have some swivelling allowance of the ... MoreNeatly manufactured unit with adequate installation guide.The two spring-type clamping devices fitted to the two shorter sides of the housing are pathetic as any ceiling material thicker or thinner than standard Gypsum board will not be accommodated. Supplementary holes in the body theoretically allow screws to improve fixing but are also quite useless being right on the edge of the opening. Potentially the overall mechanical fixing of the unit could be far from optimal. The optional single heater fitting has a far superior clamping system making for easy and safe mounting. Electrical diagram, instructions and quality are excellent.Although the heater and light globes are directionally fixed, it would be very practical to have some swivelling allowance of the light fittings to project light in selected directions.Once fitted properly the system with remote control is a pleasure to use.

Review of Martec Profile Plus 2 3-in-1 Exhaust Fan Silver

Had similar fan prior, never truly happy with it. This one is going what it was supposed to do.

Slim design

Works well and warm lights, a bit noise than I thought but much better than our old one, no complaints.