Last updated at 09/06/2026 12:07:34
MILWAUKEE 2 Piece 125mm Through Tang Demo Screwdriver Set 48222702
Delivery between 16–19 June $9.70
Milwaukee 2pce Tri-Lobe Screwdriver Demo Set - 48222702
Delivery between Fri – Mon $12
Milwaukee 2 pc Demo Screwdriver Set - 48222702 - Tool Kit Depot
Delivery between 16–19 June $10
Milwaukee 48222702 2pce Tri-Lobe Screwdriver Demo Set
Delivery $9.70
Milwaukee 2pc Demolition Screwdriver Set - 48222702
Delivery $12
Demo Screwdriver Drivers With Steel Caps (2-piece) | Milwaukee
Delivery $44.14
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Milwaukee - 48-22-2702 - Demo Screwdriver Drivers With Steel Caps -
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Milwaukee 48222702 - 2 Piece Demolition Screwdriver Set - C&L Tool Centre
Delivery between 12–16 June $12
Scrwdrvr Set Comfrt Tri-Lobe Hndl 2 pcs.
Delivery $8.32
Milwaukee 48-22-2702 Demolition Screwdriver Set, 2 Pieces, Phillips/slotted Tip, 5/16 Inch Tip Size
Delivery $52.53
originally posted on homedepot.com
A screwdriver that is meant to do what most of us already to - beat on them.A well build screwdriver set.A rubberized handle for gripping. Handle is a good size and comfortable in a tight grip.The design of the screwdrivers is the drivers go all the way through the handle and is capped with a steel cap on the handle end. It should take the beating well without transferring the pounding into the handle.The shank has flat sides so that you can get extra turning torque using a crescent wrench.The end caps are marked + for phillips and - for slotted so it is easy to identify when in the tool pouch.A very robust set. The phillips end is like a #3 however the very tip is slim enough to go in #2 screw.About 9 inch overall length, 6 inch shank length.
originally posted on homedepot.com
I bought this for a client and he loves it. I use them all the time when I'm at his house and love it too. Some people like to spend $1-2 bucks on screwdrivers like myself in the past, but more recently I've been a HUGE fan of HIGH QUALITY tools. These don't strip screws as much, they give you more torque due to the grip(YES, it makes a huge difference), and it gives you confidence in your tools. You can hammer it if the screw is tight and needs to loosen some rust.I used to buy "lifetime warranty" screwdrivers for 1/5th the price of this and think to myself I could just return it if it goes badly. Waste of my time! Just go for the best. It'll last you 5-10x longer and give you peace of mind while working on the job.The heads are slightly bigger than normal, so ... MoreI bought this for a client and he loves it. I use them all the time when I'm at his house and love it too. Some people like to spend $1-2 bucks on screwdrivers like myself in the past, but more recently I've been a HUGE fan of HIGH QUALITY tools. These don't strip screws as much, they give you more torque due to the grip(YES, it makes a huge difference), and it gives you confidence in your tools. You can hammer it if the screw is tight and needs to loosen some rust.I used to buy "lifetime warranty" screwdrivers for 1/5th the price of this and think to myself I could just return it if it goes badly. Waste of my time! Just go for the best. It'll last you 5-10x longer and give you peace of mind while working on the job.The heads are slightly bigger than normal, so you may have issues when working with electrical plate covers and whatnot. But for that, I have Milwalulkee's 11-1 tool! Get it!I'm glad Milwaukee has started to make these hand tools and flashlights. They have the resources and R&D to make better products than other companies.
originally posted on homedepot.com
I use these more than I thought I would, especially the Phillips head. In the process of moving I had to remove a shelf from a bathroom wall which had three Phillips head toggle bolts. Started by using my cordless w/ a number two bit but they were so tight and the fact that my bit was worn more than I thought the head immediately started to strip. I had both of these in my pouch side by side so it was nice that the ends are marked for Phillips or straight. In this case the longer , approx.7 in handle, made it easy to work inside the cabinet and back out the bolt enough to get the cordless to finish the job. These also worked nice when having to put together some furniture, start with the cordless and finish with the screwdriver to control the final tightening ... MoreI use these more than I thought I would, especially the Phillips head. In the process of moving I had to remove a shelf from a bathroom wall which had three Phillips head toggle bolts. Started by using my cordless w/ a number two bit but they were so tight and the fact that my bit was worn more than I thought the head immediately started to strip. I had both of these in my pouch side by side so it was nice that the ends are marked for Phillips or straight. In this case the longer , approx.7 in handle, made it easy to work inside the cabinet and back out the bolt enough to get the cordless to finish the job. These also worked nice when having to put together some furniture, start with the cordless and finish with the screwdriver to control the final tightening procedure. Stripping out screws can create a nightmare. The steel caps are a plus as far as bite and , so far, wear ability. Yes, cordless is nice and saves time but every now and then the "old" way can save you too. Remember too they are Milwaukee.
| Product dimensions | 3.05 x 7.11 x 33.27 cm; 439.42 Grams |
| Auto shut-off | No |
| Recommended uses for product | Multipurpose |
| Special feature | Durability |
| Item dimensions L x W x H | 30 x 71 x 333 millimetres |
MILWAUKEE 2 Piece 125mm Through Tang Demo Screwdriver Set 48222702
Delivery between 16–19 June $9.70
Milwaukee 2pce Tri-Lobe Screwdriver Demo Set - 48222702
Delivery between Fri – Mon $12
Milwaukee 2 pc Demo Screwdriver Set - 48222702 - Tool Kit Depot
Delivery between 16–19 June $10
Milwaukee 48222702 2pce Tri-Lobe Screwdriver Demo Set
Delivery $9.70
Milwaukee 2pc Demolition Screwdriver Set - 48222702
Delivery $12
A screwdriver that is meant to do what most of us already to - beat on them.A well build screwdriver set.A rubberized handle for gripping. Handle is a good size and comfortable in a tight grip.The design of the screwdrivers is the drivers go all the way through the handle and is capped with a steel cap on the handle end. It should take the beating well without transferring the pounding into the handle.The shank has flat sides so that you can get extra turning torque using a crescent wrench.The end caps are marked + for phillips and - for slotted so it is easy to identify when in the tool pouch.A very robust set. The phillips end is like a #3 however the very tip is slim enough to go in #2 screw.About 9 inch overall length, 6 inch shank length.
I bought this for a client and he loves it. I use them all the time when I'm at his house and love it too. Some people like to spend $1-2 bucks on screwdrivers like myself in the past, but more recently I've been a HUGE fan of HIGH QUALITY tools. These don't strip screws as much, they give you more torque due to the grip(YES, it makes a huge difference), and it gives you confidence in your tools. You can hammer it if the screw is tight and needs to loosen some rust.I used to buy "lifetime warranty" screwdrivers for 1/5th the price of this and think to myself I could just return it if it goes badly. Waste of my time! Just go for the best. It'll last you 5-10x longer and give you peace of mind while working on the job.The heads are slightly bigger than normal, so ... MoreI bought this for a client and he loves it. I use them all the time when I'm at his house and love it too. Some people like to spend $1-2 bucks on screwdrivers like myself in the past, but more recently I've been a HUGE fan of HIGH QUALITY tools. These don't strip screws as much, they give you more torque due to the grip(YES, it makes a huge difference), and it gives you confidence in your tools. You can hammer it if the screw is tight and needs to loosen some rust.I used to buy "lifetime warranty" screwdrivers for 1/5th the price of this and think to myself I could just return it if it goes badly. Waste of my time! Just go for the best. It'll last you 5-10x longer and give you peace of mind while working on the job.The heads are slightly bigger than normal, so you may have issues when working with electrical plate covers and whatnot. But for that, I have Milwalulkee's 11-1 tool! Get it!I'm glad Milwaukee has started to make these hand tools and flashlights. They have the resources and R&D to make better products than other companies.
I use these more than I thought I would, especially the Phillips head. In the process of moving I had to remove a shelf from a bathroom wall which had three Phillips head toggle bolts. Started by using my cordless w/ a number two bit but they were so tight and the fact that my bit was worn more than I thought the head immediately started to strip. I had both of these in my pouch side by side so it was nice that the ends are marked for Phillips or straight. In this case the longer , approx.7 in handle, made it easy to work inside the cabinet and back out the bolt enough to get the cordless to finish the job. These also worked nice when having to put together some furniture, start with the cordless and finish with the screwdriver to control the final tightening ... MoreI use these more than I thought I would, especially the Phillips head. In the process of moving I had to remove a shelf from a bathroom wall which had three Phillips head toggle bolts. Started by using my cordless w/ a number two bit but they were so tight and the fact that my bit was worn more than I thought the head immediately started to strip. I had both of these in my pouch side by side so it was nice that the ends are marked for Phillips or straight. In this case the longer , approx.7 in handle, made it easy to work inside the cabinet and back out the bolt enough to get the cordless to finish the job. These also worked nice when having to put together some furniture, start with the cordless and finish with the screwdriver to control the final tightening procedure. Stripping out screws can create a nightmare. The steel caps are a plus as far as bite and , so far, wear ability. Yes, cordless is nice and saves time but every now and then the "old" way can save you too. Remember too they are Milwaukee.
Milwaukee Demo Screwdrivers, are great when I have to get tough with a screw or when ripping a board off of a wall. The shaft is hexagon shaped so a wrench can be applied to gain toque and the shaft extends completely through the handle to the metal cap on the end of the grip. The end caps are marked for the type of head it has which makes it easier to identify in a backpack tool bag.
Milwaukee continues to impress me on two fronts: Intelligently designed features of their tools and build quality. Even their inexpensive tools such as these are quality built with well thought out features. I've abused the regular version of this screwdriver and found it very tough. Not only to the strike plates protect the handle, but they focus the blow, so you get more effect when you are needing to strike.I've found the hex shaft on previous nut drivers from Milwaukee a nice addition and they are included here as well. This allows you to bring in a wrench to get that stubborn screw going. One have to push into the driver and one to turn. This works well.This is a quality set and should last a long time, unless you are really mean with them. Even then, they ... MoreMilwaukee continues to impress me on two fronts: Intelligently designed features of their tools and build quality. Even their inexpensive tools such as these are quality built with well thought out features. I've abused the regular version of this screwdriver and found it very tough. Not only to the strike plates protect the handle, but they focus the blow, so you get more effect when you are needing to strike.I've found the hex shaft on previous nut drivers from Milwaukee a nice addition and they are included here as well. This allows you to bring in a wrench to get that stubborn screw going. One have to push into the driver and one to turn. This works well.This is a quality set and should last a long time, unless you are really mean with them. Even then, they should give a good fight.
I love this screwdriver set I use them in the automotive field for brake rotor retaining screws. In the rust belt they are literally the best way to get these stuck screws out however they don’t hold up long at all. I’m on my 5th set purchased now because the Philips tip always shatters. I don’t have much use for the slotted would be nice to see these sold in singles. Curious what the limited lifetime warranty contributes too.
Bought about 5 years ago. Been a favorite in the farm shop. Trying to remove some tuff slot screws using a wrench on the shank. Surprised when the tip twisted. Not sure how to replace?
This are high quality set of Phillips and flat tipped screwdrivers. Great rubberized handles, fantastic tips and the steel caps when a bit of persuasion is required. I particularly like that the shafts are hexagonal so one can press down on the screwdriver and turn it with a wrench in extreme and rare situations when a screw may need that extra torque to move...Whether they are used for "demo" purposes or not, these are a MUST n one tool box (home owner or professionals alike).AND OF COURSE.... They are Milwaukee and include their Limited Lifetime Warranty.
After breaking yet another klein tool (handles and shanks twisting off screwdrivers and nutdrivers) I opted for a milwaukee. I've already got a good flat blade screwdriver, the wera stays nice and sharp. but I wanted something I could use for prying old electrical boxes out of walls on rewires. this one has a full metal shaft through the handle so was a natural choice. also has the metal cap so now I can ditch my chisel and just use this lol. If milwaukee made better pliers they'd crush Klein
I picked these up thinking I wouldn’t use them often but i use them daily. I reach for the philips every day when i need to be sure i am going to get the screw out the fit is vary good. The flat head i use and abuse probably in ways Milwaukee didn’t intend but it holds up to it. I have chipped wood out of holes to rin pipe and concrete away from tolite flanges.
| Product dimensions | 3.05 x 7.11 x 33.27 cm; 439.42 Grams |
| Auto shut-off | No |
| Recommended uses for product | Multipurpose |
| Special feature | Durability |
| Item dimensions L x W x H | 30 x 71 x 333 millimetres |
Milwaukee 2 Piece Demolition Screwdriver Set - 48222702
The Milwaukee 2 piece Demolition Screwdriver Set is designed to give you maximum jobsite toughness and durability. The demo screwdrivers, provides users with 2X longer life in demolition applications. The comfortable tri-lobe handle allows you to comfortably apply more leverage. Milwaukee demolition screwdrivers are designed for professional use on the job site.
The Milwaukee 2 piece Demolition Screwdriver Set is designed to give you maximum jobsite toughness and durability. The demo screwdrivers, provides users with 2X longer life in demolition applications. The comfortable tri-lobe handle allows you to comfortably apply more leverage. Milwaukee demolition screwdrivers are designed for professional use on the job site.
The Milwaukee 2 piece Demolition Screwdriver Set is designed to give you maximum jobsite toughness and durability. The demo screwdrivers, provides users with 2X longer life in demolition applications. The comfortable tri-lobe handle allows you to comfortably apply more leverage. Milwaukee demolition screwdrivers are designed for professional use on the job site.
The Milwaukee 2 piece Demolition Screwdriver Set is designed to give you maximum jobsite toughness and durability. The demo screwdrivers, provides users with 2X longer life in demolition applications. The comfortable tri-lobe handle allows you to comfortably apply more leverage. Milwaukee demolition screwdrivers are designed for professional use on the job site.
in 11 offers
The lowest price for Milwaukee 2 Piece Demolition Screwdriver Set - 48222702 right now is $19.00 at Total Tools, compared across 9 retailers.
The all-time low was $15.16 on 14 Feb 2026 — today's price is 25% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 9 June 2026.
