Milwaukee 2760-20 M18 Fuel Surge 1/4" Hex Hydraulic Driver
This M18 Fuel Surge cordless hydraulic driver with a pistol grip handle has a brushless motor that operates on an 18V lithium-ion battery. It has a -inch hex quick change straight drive, maximum torque of 450 in-pounds, free speed of 3000 RPM, and 4000 IPM. The tool features built-in LED lights and a Fluid-Drive hydraulic powertrain.
This M18 Fuel Surge cordless hydraulic driver with a pistol grip handle has a brushless motor that operates on an 18V lithium-ion battery. It has a -inch hex quick change straight drive, maximum torque of 450 in-pounds, free speed of 3000 RPM, and 4000 IPM. The tool features built-in LED lights and a Fluid-Drive hydraulic powertrain.
This M18 Fuel Surge cordless hydraulic driver with a pistol grip handle has a brushless motor that operates on an 18V lithium-ion battery. It has a -inch hex quick change straight drive, maximum torque of 450 in-pounds, free speed of 3000 RPM, and 4000 IPM. The tool features built-in LED lights and a Fluid-Drive hydraulic powertrain.
This M18 Fuel Surge cordless hydraulic driver with a pistol grip handle has a brushless motor that operates on an 18V lithium-ion battery. It has a -inch hex quick change straight drive, maximum torque of 450 in-pounds, free speed of 3000 RPM, and 4000 IPM. The tool features built-in LED lights and a Fluid-Drive hydraulic powertrain.
in 5 offers
The lowest price for Milwaukee 2760-20 M18 Fuel Surge 1/4" Hex Hydraulic Driver right now is $264.95 at BIG W, compared across 4 retailers.
The all-time low was $145.04 on 8 July 2025 — today's price is 83% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 23 July 2026.
Last updated at 23/07/2026 08:11:56
NEW MILWAUKEE BRUSHLESS FUEL SURGE HYDRAULIC IMPACT DRIVER 2760-20 (M18FQID-0)
Free delivery
Milwaukee Fuel Hex Hydraulic Wrench Tool 2760-20 M18, 0.63 cm
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
NEW MILWAUKEE BRUSHLESS FUEL SURGE HYDRAULIC IMPACT DRIVER 2760-20 (M18FQID-0)
Free delivery
Milwaukee 2760-20 Hydraulic Driver, 450 In-lb Max. Torque, 3000 Rpm Free Speed, 4000, Brushless Motor
Delivery $63.17
Milwaukee 27602048111850 Impact Driver, 3000 Rpm No Load Speed, 4000 Ipm Impacts Per Minute, Brushless
Free delivery
originally posted on milwaukeetool.com
Being the owner of a huge number of Milwaukee power tools this is the one that got away. The surge hydraulic impact driver doesn’t hold up. Less than 3 months into its life my first one failed. Relying on it for everyday work I was forced to buy a second thinking it was a fluke and I’d just send it in to be repaired then hold onto it as a spare. Second one failed before the other was even back from repair. Same issue, same problems, no longer impacted the screw head, fluid leaking out of the head. Decided to buy the standard non hydraulic unit then took a huge loss selling the repaired units at a huge loss. Pretty sad because all of my other tools are flawless.
originally posted on milwaukeetool.com
I absolutely love this impact, except for one very huge issue. The chuck is the worst thing I've ever seen. I've had two of these, and both of them the chuck failed and would not hold bits almost at all the very first day i used it. I don't know what they have done because this is the only impact from Milwaukee I've ever had an issue with. I also have the m12 surge and it's phenomenal. Also doesn't have a problem with holding bits and I've been using it going on a month now. I've actually had 8 Milwaukee impacts aside from the two m18 surges and i haven't ever had any problems with any of them. I used my first one for the better part of 10 years with no issues. So that said, the actual impact itself is amazing, but it isn't worth a penny considering it won't hold a ... MoreI absolutely love this impact, except for one very huge issue. The chuck is the worst thing I've ever seen. I've had two of these, and both of them the chuck failed and would not hold bits almost at all the very first day i used it. I don't know what they have done because this is the only impact from Milwaukee I've ever had an issue with. I also have the m12 surge and it's phenomenal. Also doesn't have a problem with holding bits and I've been using it going on a month now. I've actually had 8 Milwaukee impacts aside from the two m18 surges and i haven't ever had any problems with any of them. I used my first one for the better part of 10 years with no issues. So that said, the actual impact itself is amazing, but it isn't worth a penny considering it won't hold a bit. The only reason it gets 2 stars is due to the fact that the impact itself is so quiet and consistent that i can't beat to completely fail it.
originally posted on milwaukeetool.com
Due to the black Friday deal, I decided to upgrade my current supply. I read all the reviews and thought this would surely be a great purchase.How quiet it was, was almost scary. You can't even tell when it's torquing or still free spinning based off the sound alone. My client also appreciated how quiet it was due to them working from home at the time.However, today on the other hand, while trying to fasten a handicap rail, it wouldn't even sink a 3 inch screw into a wooden stud. I played with the settings to check it was on the highest one and sure enough, couldn't sink a single 3 inch screw more than half an inch into a wooden stud. So I go back to the reliable Gen 2 impact instead and it sinks them with ease.Even worse. As I go to put my tools away, I ... MoreDue to the black Friday deal, I decided to upgrade my current supply. I read all the reviews and thought this would surely be a great purchase.How quiet it was, was almost scary. You can't even tell when it's torquing or still free spinning based off the sound alone. My client also appreciated how quiet it was due to them working from home at the time.However, today on the other hand, while trying to fasten a handicap rail, it wouldn't even sink a 3 inch screw into a wooden stud. I played with the settings to check it was on the highest one and sure enough, couldn't sink a single 3 inch screw more than half an inch into a wooden stud. So I go back to the reliable Gen 2 impact instead and it sinks them with ease.Even worse. As I go to put my tools away, I notice the top of my surge impact is covered in oil. Hasn't been dropped. Its stored in a hard case and hasnt even been put to real use yet. Totally defective product. Do not recommend.My gen 1 lasted me 7 years and 100 falls, at least 10 off a roof, in everyday construction use and I can still go to my garage and pull it out as a last resort if I need too. But this new generation tool doesn't even last the "new tool cradling week"Now the hassle of warranty replacing this piece of junk.
| Is discontinued by manufacturer | No |
| Power Source | Battery Powered |
| Voltage | 18 Volts |
| Maximum Power | 800 Watts |
| Speed | 3000 RPM |
NEW MILWAUKEE BRUSHLESS FUEL SURGE HYDRAULIC IMPACT DRIVER 2760-20 (M18FQID-0)
Free delivery
Milwaukee Fuel Hex Hydraulic Wrench Tool 2760-20 M18, 0.63 cm
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
NEW MILWAUKEE BRUSHLESS FUEL SURGE HYDRAULIC IMPACT DRIVER 2760-20 (M18FQID-0)
Free delivery
Milwaukee 2760-20 Hydraulic Driver, 450 In-lb Max. Torque, 3000 Rpm Free Speed, 4000, Brushless Motor
Delivery $63.17
Milwaukee 27602048111850 Impact Driver, 3000 Rpm No Load Speed, 4000 Ipm Impacts Per Minute, Brushless
Free delivery
Being the owner of a huge number of Milwaukee power tools this is the one that got away. The surge hydraulic impact driver doesn’t hold up. Less than 3 months into its life my first one failed. Relying on it for everyday work I was forced to buy a second thinking it was a fluke and I’d just send it in to be repaired then hold onto it as a spare. Second one failed before the other was even back from repair. Same issue, same problems, no longer impacted the screw head, fluid leaking out of the head. Decided to buy the standard non hydraulic unit then took a huge loss selling the repaired units at a huge loss. Pretty sad because all of my other tools are flawless.
I absolutely love this impact, except for one very huge issue. The chuck is the worst thing I've ever seen. I've had two of these, and both of them the chuck failed and would not hold bits almost at all the very first day i used it. I don't know what they have done because this is the only impact from Milwaukee I've ever had an issue with. I also have the m12 surge and it's phenomenal. Also doesn't have a problem with holding bits and I've been using it going on a month now. I've actually had 8 Milwaukee impacts aside from the two m18 surges and i haven't ever had any problems with any of them. I used my first one for the better part of 10 years with no issues. So that said, the actual impact itself is amazing, but it isn't worth a penny considering it won't hold a ... MoreI absolutely love this impact, except for one very huge issue. The chuck is the worst thing I've ever seen. I've had two of these, and both of them the chuck failed and would not hold bits almost at all the very first day i used it. I don't know what they have done because this is the only impact from Milwaukee I've ever had an issue with. I also have the m12 surge and it's phenomenal. Also doesn't have a problem with holding bits and I've been using it going on a month now. I've actually had 8 Milwaukee impacts aside from the two m18 surges and i haven't ever had any problems with any of them. I used my first one for the better part of 10 years with no issues. So that said, the actual impact itself is amazing, but it isn't worth a penny considering it won't hold a bit. The only reason it gets 2 stars is due to the fact that the impact itself is so quiet and consistent that i can't beat to completely fail it.
Due to the black Friday deal, I decided to upgrade my current supply. I read all the reviews and thought this would surely be a great purchase.How quiet it was, was almost scary. You can't even tell when it's torquing or still free spinning based off the sound alone. My client also appreciated how quiet it was due to them working from home at the time.However, today on the other hand, while trying to fasten a handicap rail, it wouldn't even sink a 3 inch screw into a wooden stud. I played with the settings to check it was on the highest one and sure enough, couldn't sink a single 3 inch screw more than half an inch into a wooden stud. So I go back to the reliable Gen 2 impact instead and it sinks them with ease.Even worse. As I go to put my tools away, I ... MoreDue to the black Friday deal, I decided to upgrade my current supply. I read all the reviews and thought this would surely be a great purchase.How quiet it was, was almost scary. You can't even tell when it's torquing or still free spinning based off the sound alone. My client also appreciated how quiet it was due to them working from home at the time.However, today on the other hand, while trying to fasten a handicap rail, it wouldn't even sink a 3 inch screw into a wooden stud. I played with the settings to check it was on the highest one and sure enough, couldn't sink a single 3 inch screw more than half an inch into a wooden stud. So I go back to the reliable Gen 2 impact instead and it sinks them with ease.Even worse. As I go to put my tools away, I notice the top of my surge impact is covered in oil. Hasn't been dropped. Its stored in a hard case and hasnt even been put to real use yet. Totally defective product. Do not recommend.My gen 1 lasted me 7 years and 100 falls, at least 10 off a roof, in everyday construction use and I can still go to my garage and pull it out as a last resort if I need too. But this new generation tool doesn't even last the "new tool cradling week"Now the hassle of warranty replacing this piece of junk.
I bought this M18 Fuel 18V Surge 1/4 inch Hex Hydraulic Driver (Tool Only)yesterday it was opened and used, and it was missing the plastic bag, and the extra card board box place holder. I decided to test it out and I had problems using this impact driver on a screw on wood, it seemed like it was slow and had no torque. I went back to home depot the next day after, and asked for a return and I got my refund back. I instead purchased and got Milwaukee Tool M18 FUEL 18-Volt Li-Ion Brushless Cordless Next Generation 1/4 in. Hex Impact Driver (Tool Only) after that I bought it home I inserted, and clipped in the M18 battery in man, this Impact driver has very fast speed, and has a lot of power and torque I can tell just by hearing it. I'm very satisfied with my ... MoreI bought this M18 Fuel 18V Surge 1/4 inch Hex Hydraulic Driver (Tool Only)yesterday it was opened and used, and it was missing the plastic bag, and the extra card board box place holder. I decided to test it out and I had problems using this impact driver on a screw on wood, it seemed like it was slow and had no torque. I went back to home depot the next day after, and asked for a return and I got my refund back. I instead purchased and got Milwaukee Tool M18 FUEL 18-Volt Li-Ion Brushless Cordless Next Generation 1/4 in. Hex Impact Driver (Tool Only) after that I bought it home I inserted, and clipped in the M18 battery in man, this Impact driver has very fast speed, and has a lot of power and torque I can tell just by hearing it. I'm very satisfied with my purchase on the Milwaukee Tool M18 FUEL 18-Volt Li-Ion Brushless Cordless Next Generation 1/4 in. Hex Impact Driver (Tool Only) I don't know maybe I got a defective one but I dislike this M18 Fuel 18V Surge 1/4 inch Hex Hydraulic Driver (Tool Only) don't spend your money on this impact driver, get something else that's worth the value.
I don’t know what to think. I have a ton of m18 fuel tools- all 5 stars and then some. Honestly, I’ve had very mixed results regarding the impact gun. I had one and it gave up the ghost on me. To be fair, it was five years old and I traded a tool for it to another guy in exchange for the impact. I’d dropped it off a roof and figured: “Well, it’s had its day.” BUT, when I bought a surge, had it less than 6 months, purchased brand new through Home Depot, used it four times and pulled it out of its Packout cushioned case and it wouldn’t drive a 2” screw I was upset. Like, furious! I exchanged it at Home Depot because I had the original receipt. All they could do was exchange it. I emailed Milwaukee but never heard back. I LOVE m18 fuel tools, but, one… more… problem… ... MoreI don’t know what to think. I have a ton of m18 fuel tools- all 5 stars and then some. Honestly, I’ve had very mixed results regarding the impact gun. I had one and it gave up the ghost on me. To be fair, it was five years old and I traded a tool for it to another guy in exchange for the impact. I’d dropped it off a roof and figured: “Well, it’s had its day.” BUT, when I bought a surge, had it less than 6 months, purchased brand new through Home Depot, used it four times and pulled it out of its Packout cushioned case and it wouldn’t drive a 2” screw I was upset. Like, furious! I exchanged it at Home Depot because I had the original receipt. All they could do was exchange it. I emailed Milwaukee but never heard back. I LOVE m18 fuel tools, but, one… more… problem… with their ———g impact gun and I’ll get one from DeWalt or one of those stupid flex tools from Lowes out of spite.
Product arrived a few days late but that was OK considering todays shipping challenges. I received the Milwaukee driver I ordered and it appears to be in excellent/new condition. I am disappointed in the packaging or I should say lack of packaging. The retail display box was reinforced with several wraps of clear tape and a shipping label was taped on before it was transferred to FedEx for shipping. My intention was to give this away as a Christmas gift but now I have a scuffed, wrinkled, crushed corner box covered with an abundance of Scotch Tape and shipping labels. I will still use this as a gift but I will be embarrassed by the condition of the box. I guess the downside of free shipping is minimum expense and effort on the shipper's part. I would hope Walmart is ... MoreProduct arrived a few days late but that was OK considering todays shipping challenges. I received the Milwaukee driver I ordered and it appears to be in excellent/new condition. I am disappointed in the packaging or I should say lack of packaging. The retail display box was reinforced with several wraps of clear tape and a shipping label was taped on before it was transferred to FedEx for shipping. My intention was to give this away as a Christmas gift but now I have a scuffed, wrinkled, crushed corner box covered with an abundance of Scotch Tape and shipping labels. I will still use this as a gift but I will be embarrassed by the condition of the box. I guess the downside of free shipping is minimum expense and effort on the shipper's part. I would hope Walmart is not pleased with the association.
So far this is my favorite 1/4" hex impact that I've owned. I've ran maybe 600 8x1 1/2" and 10x2 1/2" screws without draining the 5ah battery and haven't had any issues. It's very controllable and much quieter than my gen 3 m12 hex impact. I definitely want to buy the m12 surge in the future, but until then, I'm really satisfied with the m18 surge. I am a marine carpenter and specialize in repair and restoration of antique and classic wooden boats. So being able to carefully install parts without cracking them from over tightening the screws is a must. I feel like this application is perfect for the surge. The low noise level of the surge is awesome when working on boats. Being inside a boat while someone else is using an impact from the outside is like being inside ... MoreSo far this is my favorite 1/4" hex impact that I've owned. I've ran maybe 600 8x1 1/2" and 10x2 1/2" screws without draining the 5ah battery and haven't had any issues. It's very controllable and much quieter than my gen 3 m12 hex impact. I definitely want to buy the m12 surge in the future, but until then, I'm really satisfied with the m18 surge. I am a marine carpenter and specialize in repair and restoration of antique and classic wooden boats. So being able to carefully install parts without cracking them from over tightening the screws is a must. I feel like this application is perfect for the surge. The low noise level of the surge is awesome when working on boats. Being inside a boat while someone else is using an impact from the outside is like being inside a drum. So less noise is greatly appreciated! 10/10 would buy again!
I've been a fan of Milwaukee tools for the last year or so, but they completely missed the mark with this one. I've literally used this tool twice. The very first time I tried to use it, I had just unpacked it out of the box (new), and it failed to take a drywall screw out of a piece of drywall. I would hit the trigger, but the chuck wouldn't spin when it was engaged on the fastener. If I pulled the trigger when it wasn't on the fastener, the chuck would spin fine. I took it to the local authorized service center and it was serviced and given back to me a couple weeks later. When I received it back, it had oil all over the inside of the plastic bag. I'm assuming this was possibly due to a hydraulic leak, but I have no idea. Regardless, I took the tool home, used it ... MoreI've been a fan of Milwaukee tools for the last year or so, but they completely missed the mark with this one. I've literally used this tool twice. The very first time I tried to use it, I had just unpacked it out of the box (new), and it failed to take a drywall screw out of a piece of drywall. I would hit the trigger, but the chuck wouldn't spin when it was engaged on the fastener. If I pulled the trigger when it wasn't on the fastener, the chuck would spin fine. I took it to the local authorized service center and it was serviced and given back to me a couple weeks later. When I received it back, it had oil all over the inside of the plastic bag. I'm assuming this was possibly due to a hydraulic leak, but I have no idea. Regardless, I took the tool home, used it on two more fasteners and it seemed to be fine, but by the third fastener, it had no power again. I pulled out my other FUEL Impact Driver and it pulled the fastener right out with no issue. I should never have bought this Surge driver.
I really loved this driver, but reliability was an issue. As a professional carpenter I use impacts daily and I own the original M18 and the new M12. The hydraulic driver was so much more quiet than its counterparts that it felt weird. I noticed a slight dip in power and it was definitely a little slower, but the noise reduction was fantastic. I wouldn't use this for framing, or anything heavy duty.Anyway, I give it 2 stars because it stopped working after 6 months of lighter use. I babied this thing too because I loved it, and it's expensive. I only used it in confined spaces or at times when noise was an issue. It is new technology and probably still working the kinks out . At the price point this should be a 7-10 year tool with normal use, lifetime for DIYers. ... MoreI really loved this driver, but reliability was an issue. As a professional carpenter I use impacts daily and I own the original M18 and the new M12. The hydraulic driver was so much more quiet than its counterparts that it felt weird. I noticed a slight dip in power and it was definitely a little slower, but the noise reduction was fantastic. I wouldn't use this for framing, or anything heavy duty.Anyway, I give it 2 stars because it stopped working after 6 months of lighter use. I babied this thing too because I loved it, and it's expensive. I only used it in confined spaces or at times when noise was an issue. It is new technology and probably still working the kinks out . At the price point this should be a 7-10 year tool with normal use, lifetime for DIYers. My other M18 is about ten years old, violently abused, and still thumps.Hopefully Milwaukee won't give me a hard time about the warranty, it was manufactured 2 1/2 years ago.I would say wait a couple years for the next generation, or the next new technology they come up with.
This product is more effective as a paper weight. We are building a 100,000 sq ft steel storage facility. We We have 5-6 guys using impacts and self tappers everyday. We have always used Milwaukee m18. But recently the quality control has severely suffered. I have purchased 7 impacts over the past 10 days, and each one has quit working within 5-6 days of use. 1/4” quick chucks won’t hold bits after the 2nd day, and by 10 days in, they won’t even drive a self tapper.I have purchased over $50,000 in Milwaukee over the past 2 years, and had no problems at all. But now I have a a bunch of $200 impacts holding up a crew that costs $300/hr…I do not recommend this product
| Is discontinued by manufacturer | No |
| Power Source | Battery Powered |
| Voltage | 18 Volts |
| Maximum Power | 800 Watts |
| Speed | 3000 RPM |
