Milwaukee Warranty claim
Milwaukee Warranty claim
in 3 offers
The lowest price for Milwaukee M18FID2-0 M18 Fuel 1/4" Hex Impact Driver right now is $89.00 at Cash Converters, compared across 3 retailers.
The all-time low was $89.00 on 11 Aug 2026. That's the lowest price we've ever tracked — a great time to buy.
Prices last updated 11 Aug 2026.
Milwaukee M18FID2-0 M18 Fuel 1/4" Hex Impact Driver
Milwaukee Warranty claim
Milwaukee Warranty claim
Last updated at 11/08/2026 09:27:38
Milwaukee M18fid2 ** Skin Only ** Impact Driver
Delivery $17.75
Milwaukee M18 FUEL 1/4\
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Milwaukee M18FID2-0 M18 FUEL 1/4" Hex Impact Driver
Delivery between Thu – Mon $60.55
originally posted on milwaukeetool.co.nz
No more air lines yeah!!!! Great little rattle that you can get into tight places the old air rattle can’t and it hasn’t been used in month’s and will probably never b used again well in my shop
originally posted on milwaukeetool.co.nz
Great when working but does stop as it gets hot and doesn’t want the tool to overheat which is a safety feature but really annoying as there’s times where ya just need it to keep going
originally posted on milwaukeetool.co.nz
A fantastic piece of kit. I often find myself reaching for this more than I first expected. I was considering a few other models at the time and can honestly say that wouldn’t be without this now. Highly recommend to anyone asking.
| Voltage | 18V |
| Chuck type | 1/4′′ Hex |
| Max torque | 226Nm |
| No load speed | 0 – 3600rpm |
| Impacts per minute | 0 – 4300ipm |
Milwaukee M18fid2 ** Skin Only ** Impact Driver
Delivery $17.75
Milwaukee M18 FUEL 1/4\
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Milwaukee M18FID2-0 M18 FUEL 1/4" Hex Impact Driver
Delivery between Thu – Mon $60.55
No more air lines yeah!!!! Great little rattle that you can get into tight places the old air rattle can’t and it hasn’t been used in month’s and will probably never b used again well in my shop
Great when working but does stop as it gets hot and doesn’t want the tool to overheat which is a safety feature but really annoying as there’s times where ya just need it to keep going
A fantastic piece of kit. I often find myself reaching for this more than I first expected. I was considering a few other models at the time and can honestly say that wouldn’t be without this now. Highly recommend to anyone asking.
Have been using for nearly a year.Heaps of power to drive in big screws.Have recently found that when switching from forward to reverse, the driver will continue to go forward. Not the best when your trying to take out roofing screws, and it drives them deeper, denting the coloursteel.
I had no issues with my old set, but once I changed over to this I instantly noticed it was lighter, has a speed control, easier to control and more powerful. I have had a few instances when I pull the trigger and it doesn't work first time, but if I reset the it it works fine. It can be hard to get into tight places if you use the 3.0 battery
Impact driver is good for all jobs and purposes and the design is smaller than my last one and is better for tight places.
I purchased this roughly 6 months ago as apart of a 6 piece kit. Overall I am enjoying using it for a whole range of tasks. It performs all tasks very well, it is nice to hold and compact enough to fit in most spaces. I would like to see an improvement in trigger sensitivity and to be able to torque screws at a lower rpm . I noticed a dead spot in the trigger when trying to install drywall and trying to slowly torque the screws to make them sit flush or just below the surface of the drywall without ripping the paper.
Bought this tool a few months ago and it has great power for bigger screws and is nice and compact but I find with smaller screws the drill bit will pop out the the screw head before it rattles, because there is not enough pressure with the small screw
Bought Milwaukee m18f1d2 Brilliant performs great I love that you can control the amount of speed and torque, brushless motor is excellent would highly recommend
I've had the old model and its served well. driving 100mm tech screws into hardwood jarrah with ease. the brushes went so I looked around for the same thing in a brushless version. I have brushless drills and saws. highly recommend this tool. more power more setting and lighter. changed the brushes on the old girl and she's going well again, so now I've got 2 impact which is really handy. time will tell but I reckon this is definitely an improvement on a very good tool.
| Voltage | 18V |
| Chuck type | 1/4′′ Hex |
| Max torque | 226Nm |
| No load speed | 0 – 3600rpm |
| Impacts per minute | 0 – 4300ipm |
