MSI MPG GUNGNIR 110R Case, Mid Tower ATX

I bought MSI MPG Gungnir 110M 3 days ago and I am now writing from my newly built PC :)Came with original packaging. 1 day of delivery (17 hours in my case).Product feels sturdy, air flow is excellent I literally found out my previous chassis was causing my fans to spin a lot louder when I use this chassis I don't ever notice whether if there are fans down there :).It was a little bit hard to install for me. Installation manual was a little bit lacking information.Even tough it has a key for changing LED colors, front panel LED colors cannot be changed.

Best mid-tower IMO!

This is my first mid-tower build and it's been excellent! Coming form a full tower I was worried about space and temps however this tower has kept my system at the same temps previous. Space has been great as well with spacious areas for components and plenty of room to cable manage. Also included are easily removable dust filters, something my previous case didn't have, I no longer have to disassemble the majority of my tower to clean dust.The tower itself looks phenomenal, photos don't do it justice! The RGB fans have a very deep and rich color and are very quiet. The integrated RGB controller is nice letting you pick between many lighting colors and patterns from a button on the tower or you can hook them up to your motherboard as they are addressable.MSI has ... MoreThis is my first mid-tower build and it's been excellent! Coming form a full tower I was worried about space and temps however this tower has kept my system at the same temps previous. Space has been great as well with spacious areas for components and plenty of room to cable manage. Also included are easily removable dust filters, something my previous case didn't have, I no longer have to disassemble the majority of my tower to clean dust.The tower itself looks phenomenal, photos don't do it justice! The RGB fans have a very deep and rich color and are very quiet. The integrated RGB controller is nice letting you pick between many lighting colors and patterns from a button on the tower or you can hook them up to your motherboard as they are addressable.MSI has been my go to choice for PC products, Motherboard, Graphics cards and now my case. Would definitely recommend this one. The cost for what you get, especially with the included 4 RGB fans is well worth it!

Case swap omen 25 L

Im so happy i bought this case. I originally bought the corsair case i set it up and could not connect the rgb. I then returned it for this case. Im so glad i did! This case is bigger than omen case which is good. I also liked the simple rgb button on the case. It requires a sata cable super easy. My only grip was the spot for power supply didnt correctly line up with the holes. Which is not huge. It also it didnt come with clear instructions.. a simple youtube search will help. Highly recommend

Decent case for the price.

I needed to stay in budget, and coming in at $99, this is a solid deal. It's really pretty. The fans are not top of the line, but they're good enough. Eventually I'll probably replace them with some Lian-Li's or Corsairs. There is not enough room to mount a 360aio cooler in the front, at least mine didn't fit, I had to rip out the drive cage and it still barely fits. Also, you're supposed to mount your aio with the tubes at the bottom, to reduce the chance of air bubbles shortening the lifespan of your pump. This is not possible at all in this case. Cable management is a bit of a problem, the back panel gives no breathing room, so you have to be super vigilant about binding and flattening down all your cablework. As a veteran builder, I had enough stuff lying around ... MoreI needed to stay in budget, and coming in at $99, this is a solid deal. It's really pretty. The fans are not top of the line, but they're good enough. Eventually I'll probably replace them with some Lian-Li's or Corsairs. There is not enough room to mount a 360aio cooler in the front, at least mine didn't fit, I had to rip out the drive cage and it still barely fits. Also, you're supposed to mount your aio with the tubes at the bottom, to reduce the chance of air bubbles shortening the lifespan of your pump. This is not possible at all in this case. Cable management is a bit of a problem, the back panel gives no breathing room, so you have to be super vigilant about binding and flattening down all your cablework. As a veteran builder, I had enough stuff lying around to make it work the way I needed it to. And since I couldn't afford a nicer lian-li or corsair case that fit my needs, this fits the bill as getting what I needed for what I wanted to pay. All done... it looks great and I'm happy.

Good for what it is

My biggest concern was the front panel not getting enough airflow since it does not have a mesh front panel. The front panel on this case does have small ventilation on the top, bottom, and sides. There's a small slit in the middle of the front panel too.For the PC I built I used a 5600x and 3070, so not really that demanding for cooling and temperatures are fine. But if you're using components that get hotter, this might not be the best choiceIf you get this on sale (I got it for $75) then it's a really good deal. Easy to build in, enough fans, and the RGB fans are already cable managed. The button on the front of the case controls RGB.It also fit the MSI theme I did, you can see the power supply from the PSU window in my picture. It also fit the Mag ... MoreMy biggest concern was the front panel not getting enough airflow since it does not have a mesh front panel. The front panel on this case does have small ventilation on the top, bottom, and sides. There's a small slit in the middle of the front panel too.For the PC I built I used a 5600x and 3070, so not really that demanding for cooling and temperatures are fine. But if you're using components that get hotter, this might not be the best choiceIf you get this on sale (I got it for $75) then it's a really good deal. Easy to build in, enough fans, and the RGB fans are already cable managed. The button on the front of the case controls RGB.It also fit the MSI theme I did, you can see the power supply from the PSU window in my picture. It also fit the Mag Coreliquid 240 AIO on the top no problem.

Great value ,4 LED fans included save time and effort, great cable managment!

My niece asked me to build her a gaming PC on a budget. We were able to find a motherboard, CPU and graphics card but due to the cost of graphics cards her budget was exhausted. I donated the funds to buy the case, and this one fit the bill perfectly. The side panel are easily removed with the installed thumb screws. The LED cabling for the fans was already connected to the controller and top panel switch. Mounting the motherboard was a snap, and I was able to easily route all cables from the hidden side of the case to the motherboard and graphics card. The case seems to be manufactured well, no sharp edges on the one I purchased. The tempered glass was without scratches and was covered with a protective film. The power supply installed easily and I put in a 3.5" ... MoreMy niece asked me to build her a gaming PC on a budget. We were able to find a motherboard, CPU and graphics card but due to the cost of graphics cards her budget was exhausted. I donated the funds to buy the case, and this one fit the bill perfectly. The side panel are easily removed with the installed thumb screws. The LED cabling for the fans was already connected to the controller and top panel switch. Mounting the motherboard was a snap, and I was able to easily route all cables from the hidden side of the case to the motherboard and graphics card. The case seems to be manufactured well, no sharp edges on the one I purchased. The tempered glass was without scratches and was covered with a protective film. The power supply installed easily and I put in a 3.5" hard disk and a 2.5" SSD with room to spare.Best of all all necessary screws were included.Would highly recommend for the money.

Lacking needed instructions, good cable management

The case is great for wire management with slots that allow bringing cables behind a layer in the case to the area of the board that you need to reach.The case DOES NOT come with instructions on how to hook up any of the fans and lights.The purchase I made, the manual showed a 3-way splitter for lights but only had a 2-way wire.The manual shows the layout on how to hook up some of the basic case cables but has no instructions on many other cable ends that come with the case.Make sure you have a way to search the internet before trying to move your computer to this case.Currently I have 2 fans not running since I needed to have the cpu fan plugged in. There is also some end of a USB cable that doesn't have any kind of slot to plug into.

Simple, Clean, Well Ventilated Design

I bought this case to replace a decade-plus old Antec. I found the case to be well laid out and well thought out. I particularly liked how easy it was to route all the cabling behind the motherboard mounting plate, for a nice clean installation. There is lots of room in the case, making it easy to get to all the various connectors on the motherboard - a welcome change from my previously cramped case.The only issue I had was that I had to remove the hard drive cage next to the power supply mounting location - and that's with only a 750 watt EVGA power supply. Fortunately, my drives are all SSDs, so it wasn't an issue for me, but if you have a long PSU, and old school 3.5" hard drives, you might run into problems.I added two fans to the existing four, and found ... MoreI bought this case to replace a decade-plus old Antec. I found the case to be well laid out and well thought out. I particularly liked how easy it was to route all the cabling behind the motherboard mounting plate, for a nice clean installation. There is lots of room in the case, making it easy to get to all the various connectors on the motherboard - a welcome change from my previously cramped case.The only issue I had was that I had to remove the hard drive cage next to the power supply mounting location - and that's with only a 750 watt EVGA power supply. Fortunately, my drives are all SSDs, so it wasn't an issue for me, but if you have a long PSU, and old school 3.5" hard drives, you might run into problems.I added two fans to the existing four, and found the case to be well ventilated for my 5800X CPU and RX6600-XT GPU.For all but the most complex builds, this is a great case.

The Best Case For Under 100

Having used a number of cases for multiple PC builds, I can safely say this is the wisest purchase I've made. I have had easy to use but boring cases and flashy but complicated and difficult cases, this is the first time I've had one I can safely say combines the best of both. The case is sturdy and rugged, even the glass components feel solid. It has the most straightforward interior layout I've used so far in my amateur PC building career, making the building process incredibly easy throughout. The additional mounting points for SSDs are a particularly good touch, while the top of the case made my first experience setting up liquid cooling easy.It also absolutely looks the part for anyone after an RGB setup. The included RGB fans look amazing, and the controller ... MoreHaving used a number of cases for multiple PC builds, I can safely say this is the wisest purchase I've made. I have had easy to use but boring cases and flashy but complicated and difficult cases, this is the first time I've had one I can safely say combines the best of both. The case is sturdy and rugged, even the glass components feel solid. It has the most straightforward interior layout I've used so far in my amateur PC building career, making the building process incredibly easy throughout. The additional mounting points for SSDs are a particularly good touch, while the top of the case made my first experience setting up liquid cooling easy.It also absolutely looks the part for anyone after an RGB setup. The included RGB fans look amazing, and the controller is easy to customise with.Overall, I couldn't be happier with this case. The build was easy, I have faith that any future touch-ups will also be just as easy, and it feels solid and looks great. Can't ask for more than that.

The marvelous craftsmanship shows with this case!

I purchased this to pair with my other MSI products. I choose them because I’ve always had a great experience and they go over the top and don’t over-charge for their products. This case really is Cool in all ways so my hardware runs great while gaming, even better than I expected, also plenty of room, my favorite part is that it’s super easy to clean which can be hard with other cases, also the fact it’s sturdy, mostly metal and tempered glass but that leads to a possible downfall for some, the weight is heavy. One thing I could have done without is the hard drive bay, it’s just in the way but atleast it can be removed. The buttons are all wired and ready to go also the led module lets you connect 6 fans and control them all with a button to sync and change their ... MoreI purchased this to pair with my other MSI products. I choose them because I’ve always had a great experience and they go over the top and don’t over-charge for their products. This case really is Cool in all ways so my hardware runs great while gaming, even better than I expected, also plenty of room, my favorite part is that it’s super easy to clean which can be hard with other cases, also the fact it’s sturdy, mostly metal and tempered glass but that leads to a possible downfall for some, the weight is heavy. One thing I could have done without is the hard drive bay, it’s just in the way but atleast it can be removed. The buttons are all wired and ready to go also the led module lets you connect 6 fans and control them all with a button to sync and change their color and style. This is nice if you don’t want to have to open and run a program to do it and makes it so the wired are hidden instead of filling the jrainbow ports on your motherboard. 5/5 hands down. Would recommend a 240 liquid cooler for a top mount exhaust radiator or for slightly better cooling but harder installation you can try a 360 front mount but will require planning and doing to install, I used 3push fans on the 360 radiator and added a seventh fan for pulling, I will try to mount the radiator upside down (the correct way) when I move the hard drive bay out of the way of the tubing. Would make a great Darth Vader themed build, I went with IronMan for this one.