This Ozito254mm Table Saw with a powerful 2000W motor has been designed to cut timber and timber products. The large work table with easy to install side tables provides greater stability when cutting larger workpieces. Designed for multi-purpose applications such as ripping, cross and mitre cuts of timber, chipboard and plywood. The saw can also be tilted up to 45°for accurate bevel cuts. For safety a push stick is included with its own holder where it is always within reaching distance. Dust extraction from the rear of the saw will keep the work area clean whilst the stand with anti-slip rubber feet provides full support and stability.
This Ozito254mm Table Saw with a powerful 2000W motor has been designed to cut timber and timber products. The large work table with easy to install side tables provides greater stability when cutting larger workpieces. Designed for multi-purpose applications such as ripping, cross and mitre cuts of timber, chipboard and plywood. The saw can also be tilted up to 45°for accurate bevel cuts. For safety a push stick is included with its own holder where it is always within reaching distance. Dust extraction from the rear of the saw will keep the work area clean whilst the stand with anti-slip rubber feet provides full support and stability.
in 3 offers
The lowest price for Ozito 2000W 254mm 10" Table Saw right now is $199.00 at Bunnings Warehouse, compared across 3 retailers.
The all-time low was $199.00 on 31 July 2025. That's the lowest price we've ever tracked — a great time to buy.
Prices last updated 26 June 2026.
Ozito 2000W 254mm 10" Table Saw
This Ozito254mm Table Saw with a powerful 2000W motor has been designed to cut timber and timber products. The large work table with easy to install side tables provides greater stability when cutting larger workpieces. Designed for multi-purpose applications such as ripping, cross and mitre cuts of timber, chipboard and plywood. The saw can also be tilted up to 45°for accurate bevel cuts. For safety a push stick is included with its own holder where it is always within reaching distance. Dust extraction from the rear of the saw will keep the work area clean whilst the stand with anti-slip rubber feet provides full support and stability.
This Ozito254mm Table Saw with a powerful 2000W motor has been designed to cut timber and timber products. The large work table with easy to install side tables provides greater stability when cutting larger workpieces. Designed for multi-purpose applications such as ripping, cross and mitre cuts of timber, chipboard and plywood. The saw can also be tilted up to 45°for accurate bevel cuts. For safety a push stick is included with its own holder where it is always within reaching distance. Dust extraction from the rear of the saw will keep the work area clean whilst the stand with anti-slip rubber feet provides full support and stability.
Last updated at 26/06/2026 15:59:59
Ozito 2000W 254mm 10" Table Saw TBS-2010
Delivery $55
Ozito 2000W 254mm 10" Table Saw TBS-2010
Delivery $55
Ozito 2000w 254mm 10" Table Saw Tbs-2010
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
originally posted on bunnings.com.au
What? 5 STARS for an OZITO Table Saw?YES. I bought this unit, because:a). I knew what it was and really, for the price expected nothing.b). I knew I would be buying an upper rangei saw soon enough.BUT: What I got was a nice little table saw for small jobs around the home - and for Luthier work cutting hard woods...I made some simple adjustments and made a little sled (running in the non spec' tracks) to cut smaller stock, like 45X45mm.Replace the blade if you want smooth cuts, as the included blade has too few teeth for anything neat. There are 2 hex bolts - one on each side of the "bevel" guide. These control how far you can create a bevel. they should be set - but mine were set so that 0 degrees (blade straight up and square / no bevel) was actually about +4 ... MoreWhat? 5 STARS for an OZITO Table Saw?YES. I bought this unit, because:a). I knew what it was and really, for the price expected nothing.b). I knew I would be buying an upper rangei saw soon enough.BUT: What I got was a nice little table saw for small jobs around the home - and for Luthier work cutting hard woods...I made some simple adjustments and made a little sled (running in the non spec' tracks) to cut smaller stock, like 45X45mm.Replace the blade if you want smooth cuts, as the included blade has too few teeth for anything neat. There are 2 hex bolts - one on each side of the "bevel" guide. These control how far you can create a bevel. they should be set - but mine were set so that 0 degrees (blade straight up and square / no bevel) was actually about +4 degrees. a quick adjustment set it "Ozito Perfect". So - get yourself a small 100mm engineers square with 90 and 45 degrees - even just cut a piece of card 90 and 45 degrees, and check your blade at both extremes. I also used tape to seal up some of the holes to get a better draw on a vacuum cleaner.The Fence: The fence was a surprise - it works quite well indeed. I set the fence up but always measured the distance from the blade and then from the edge of the table to the fence at both ends. But it was square.I always clamped the far end of the fence so it wouldn't deflect or "bend".I would recommend this to anyone who isn't doing big work, but needs to cut down on the handsaw strokes.The motor - is "Ozito Loud" - ergo: "REALLY LOUD", ear protectors - you DO need them. At 2000Watts it certainly cut through everything I threw at it - Jarra, multiple (stacked) MDF, Black Wood. It would slow, but it still cut nicely.Treat this cheap but surprisingly capable little table saw for what it is, and it will be an asset to you. It was for me.Remember: ALWAY UNPLUG A TABLE SAW WHEN NOT ACTUALLY CUTTING. Turning off at the machine end is NEVER ENOUGH :) Xx.
originally posted on bunnings.com.au
I bought this table saw last week. After assembling it over the weekend, I found that the saw blade and the guide blade were not in a straight line, and I couldn’t adjust it. Then I went to the bunnings store and asked the people in the tool department, but they couldn’t solve it. Finally, I buy new tools to do my job
originally posted on bunnings.com.au
Was purchased for a dyi project. Great little saw. Perfect for house projects. Value for money
| Total Weight | 18.8kg |
Ozito 2000W 254mm 10" Table Saw TBS-2010
Delivery $55
Ozito 2000W 254mm 10" Table Saw TBS-2010
Delivery $55
Ozito 2000w 254mm 10" Table Saw Tbs-2010
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
What? 5 STARS for an OZITO Table Saw?YES. I bought this unit, because:a). I knew what it was and really, for the price expected nothing.b). I knew I would be buying an upper rangei saw soon enough.BUT: What I got was a nice little table saw for small jobs around the home - and for Luthier work cutting hard woods...I made some simple adjustments and made a little sled (running in the non spec' tracks) to cut smaller stock, like 45X45mm.Replace the blade if you want smooth cuts, as the included blade has too few teeth for anything neat. There are 2 hex bolts - one on each side of the "bevel" guide. These control how far you can create a bevel. they should be set - but mine were set so that 0 degrees (blade straight up and square / no bevel) was actually about +4 ... MoreWhat? 5 STARS for an OZITO Table Saw?YES. I bought this unit, because:a). I knew what it was and really, for the price expected nothing.b). I knew I would be buying an upper rangei saw soon enough.BUT: What I got was a nice little table saw for small jobs around the home - and for Luthier work cutting hard woods...I made some simple adjustments and made a little sled (running in the non spec' tracks) to cut smaller stock, like 45X45mm.Replace the blade if you want smooth cuts, as the included blade has too few teeth for anything neat. There are 2 hex bolts - one on each side of the "bevel" guide. These control how far you can create a bevel. they should be set - but mine were set so that 0 degrees (blade straight up and square / no bevel) was actually about +4 degrees. a quick adjustment set it "Ozito Perfect". So - get yourself a small 100mm engineers square with 90 and 45 degrees - even just cut a piece of card 90 and 45 degrees, and check your blade at both extremes. I also used tape to seal up some of the holes to get a better draw on a vacuum cleaner.The Fence: The fence was a surprise - it works quite well indeed. I set the fence up but always measured the distance from the blade and then from the edge of the table to the fence at both ends. But it was square.I always clamped the far end of the fence so it wouldn't deflect or "bend".I would recommend this to anyone who isn't doing big work, but needs to cut down on the handsaw strokes.The motor - is "Ozito Loud" - ergo: "REALLY LOUD", ear protectors - you DO need them. At 2000Watts it certainly cut through everything I threw at it - Jarra, multiple (stacked) MDF, Black Wood. It would slow, but it still cut nicely.Treat this cheap but surprisingly capable little table saw for what it is, and it will be an asset to you. It was for me.Remember: ALWAY UNPLUG A TABLE SAW WHEN NOT ACTUALLY CUTTING. Turning off at the machine end is NEVER ENOUGH :) Xx.
I bought this table saw last week. After assembling it over the weekend, I found that the saw blade and the guide blade were not in a straight line, and I couldn’t adjust it. Then I went to the bunnings store and asked the people in the tool department, but they couldn’t solve it. Finally, I buy new tools to do my job
Was purchased for a dyi project. Great little saw. Perfect for house projects. Value for money
| Total Weight | 18.8kg |
