Ridgid 40617 101 Close Quarters Tubing Cutter
Product description: Specially designed for use in confined spaces for small-diameter hard and soft copper, aluminium, brass and plastic pipes. Features: Rolls feature grooves for "close-to-flare" cuts on models 101, 101J and 118. Strong, lightweight carriage and wheel housing and large, knurled screw knob offer easy control of cutting pressure for clean cuts. Models 117 and 118 feature an AUTOFEED cutting wheel with automatic feed that cuts automatically after the knob is tightened once. Model 118 features a special knob for easier tightening of the feed screw. Model 101-ML is for multilayer tubes only.
Product description: Specially designed for use in confined spaces for small-diameter hard and soft copper, aluminium, brass and plastic pipes. Features: Rolls feature grooves for "close-to-flare" cuts on models 101, 101J and 118. Strong, lightweight carriage and wheel housing and large, knurled screw knob offer easy control of cutting pressure for clean cuts. Models 117 and 118 feature an AUTOFEED cutting wheel with automatic feed that cuts automatically after the knob is tightened once. Model 118 features a special knob for easier tightening of the feed screw. Model 101-ML is for multilayer tubes only.
Product description: Specially designed for use in confined spaces for small-diameter hard and soft copper, aluminium, brass and plastic pipes. Features: Rolls feature grooves for "close-to-flare" cuts on models 101, 101J and 118. Strong, lightweight carriage and wheel housing and large, knurled screw knob offer easy control of cutting pressure for clean cuts. Models 117 and 118 feature an AUTOFEED cutting wheel with automatic feed that cuts automatically after the knob is tightened once. Model 118 features a special knob for easier tightening of the feed screw. Model 101-ML is for multilayer tubes only.
Product description: Specially designed for use in confined spaces for small-diameter hard and soft copper, aluminium, brass and plastic pipes. Features: Rolls feature grooves for "close-to-flare" cuts on models 101, 101J and 118. Strong, lightweight carriage and wheel housing and large, knurled screw knob offer easy control of cutting pressure for clean cuts. Models 117 and 118 feature an AUTOFEED cutting wheel with automatic feed that cuts automatically after the knob is tightened once. Model 118 features a special knob for easier tightening of the feed screw. Model 101-ML is for multilayer tubes only.
in 15 offers
The lowest price for Ridgid 40617 101 Close Quarters Tubing Cutter right now is $45.32 at Direct Wholesale, compared across 15 retailers.
The all-time low was $21.72 on 9 Nov 2024 — today's price is 109% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 19 Nov 2026.
Last updated at 19/11/2026 17:38:47
RIDGID 40617 Model 101 Close Quarters Tubing Cutter, 1/4-inch to 1-1/8-inch Tube Cutter
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ridgid Tube Cutter Ridgid #101 - 40617
Delivery between Mon – Wed $12.95
RIDGID 101 6-28mm Close Quarters Tubing Cutter - 40617
Delivery between 23–27 Nov $17.10
RIDGID 101 Close Quarters Tubing Cutter 6-28mm 40617
Delivery between Mon – Tue $15.45
Ridgid 101 (40617) 6mm-28mm Close Quarters Tubing Cutter
Delivery between 26 Nov – 4 Dec $13.25
RIDGID Cutter Tube Mini 1/4In1 1/8In 40617
Delivery between 26 Nov – 1 Dec $13.25
Ridgid - CC247 RIDGID 40617 Model 101 Close Quarters Tubing Cutter, 1/4-inch to 1-1/8-inch
Delivery $40
Midget Tube Cutter (40617)
Delivery between 20 Nov – 4 Dec $52.49
Ridgid 40617 Model 101 Close Quarters Tubing Cutter, 1/4-inch To Small
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ridgid 40617 Midget Tube Cutter, 1/4 To 1 1/8 Inch Cutting Capacity, Zinc
Delivery $58
originally posted on homedepot.com
Wasn’t sure about what size cutter I needed. Was going to buy the smaller one but was afraid it would be to small and the salesman wasn’t much help. Opted for the bigger one because it came with an extra cutting wheel. Cut my copper pipe with little effort.
originally posted on homedepot.com
I prefer the Rigid cutter over most others due to quality, ergonomics like the diamond shaped no slip handle, and better cutter wheel lock up using an E-Clip instead of a screw to hold the cutter wheel in place. Rigid is mostly a better designed cutter. Rigid should redesign the stop on the adjustment screw allowing it to close up to cut 1/8" and 3/16" tube but because it does not you need more than one cutter to cut all tube in that size range and this is where Lenox 21010TC118 got it right.
originally posted on homedepot.com
For me the Ridgid #101 Tube Cutter is a back saver. Long Story short, running electrical wire almost 400’ through underground conduit proved to be more difficult than it should have been. I ended up digging three holes in difficult, dry, compacted clay. I was able to easily cut the PVC tubing and access the wire and advance my cause without digging deeper. Happy is an understatement. I would have surely damaged the wiring if I had used a hack saw or other type of cutter. This cutter is well constructed, guaranteed, easy to use, and even comes with a replacement blade. It is at least professional grade and of the quality one has learned to expect from the Ridgid Brand. Great Tube Cutter, Ridgid.
| Tool Type | Tubing Cutter, Pipe Cutter |
| Length | 8.26 cm |
| Weight | 0.5 lb |
| Cutting Capacity | 1/4 inch to 1-1/8 inch |
| Cutting Mechanism | Adjustable Screw |
RIDGID 40617 Model 101 Close Quarters Tubing Cutter, 1/4-inch to 1-1/8-inch Tube Cutter
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ridgid Tube Cutter Ridgid #101 - 40617
Delivery between Mon – Wed $12.95
RIDGID 101 6-28mm Close Quarters Tubing Cutter - 40617
Delivery between 23–27 Nov $17.10
RIDGID 101 Close Quarters Tubing Cutter 6-28mm 40617
Delivery between Mon – Tue $15.45
Ridgid 101 (40617) 6mm-28mm Close Quarters Tubing Cutter
Delivery between 26 Nov – 4 Dec $13.25
Wasn’t sure about what size cutter I needed. Was going to buy the smaller one but was afraid it would be to small and the salesman wasn’t much help. Opted for the bigger one because it came with an extra cutting wheel. Cut my copper pipe with little effort.
I prefer the Rigid cutter over most others due to quality, ergonomics like the diamond shaped no slip handle, and better cutter wheel lock up using an E-Clip instead of a screw to hold the cutter wheel in place. Rigid is mostly a better designed cutter. Rigid should redesign the stop on the adjustment screw allowing it to close up to cut 1/8" and 3/16" tube but because it does not you need more than one cutter to cut all tube in that size range and this is where Lenox 21010TC118 got it right.
For me the Ridgid #101 Tube Cutter is a back saver. Long Story short, running electrical wire almost 400’ through underground conduit proved to be more difficult than it should have been. I ended up digging three holes in difficult, dry, compacted clay. I was able to easily cut the PVC tubing and access the wire and advance my cause without digging deeper. Happy is an understatement. I would have surely damaged the wiring if I had used a hack saw or other type of cutter. This cutter is well constructed, guaranteed, easy to use, and even comes with a replacement blade. It is at least professional grade and of the quality one has learned to expect from the Ridgid Brand. Great Tube Cutter, Ridgid.
I use this to cut through the builder-supplied Accor compression fittings on PEX. The ones that have the flimsy looking plastic push/pull shutoff valve that makes me nervous each time I need to shut off the water. Get the bigger size pipe cutter model 40617, the smaller version of this model will not open wide enough. It's the easiest way to cut through the exterior hard shell plastic. Spin until you hear it crack, take off, use some good snips to get the bite off, and voila. Done about three faucet changes now without issue. Spray with some protective lubricant after each use. I've also cut some metal closet rods. I guess it went as fine as such a tool can be. But its primary function in my home is removing those connectors.
Ok for the occasional one or two cuts, but difficult and tiring to use if > 2 cuts. Why? Strange design doesn't allow the pipe to easily align itself in the rollers, requiring constant and difficult repositioning. Also, the tightening knob just too small to get any reasonable torque. You'll need to use pliers after a couple of cuts due to hand fatigue. If you have to do several cuts with this unit, it will take you significant time and effort.I hope this helps
This Ridgid tubing cutter is great for cutting pipe in those hard-to-reach spots where you just can't get a large cutter into. I had to use this to cut pipe that was installed between some tight studs in my walls, and it worked out perfectly because I was still able to spin it in the space that would be between the drywall and the outside wall. It's also easy to take with your if you don't want to take up a lot of space with a large cutter in your tool box. The only reason I gave it 4 stars is because it's not the most comfortable tool to operate in your hand. It can take a bit of hand strength to keep it spinning and adjusted to the right tension.
I recently purchased a Ridgid 1” Close Quarters Tubing Cutter. It comes with a spare wheel. This Ridgid cutter is capable of cutting between 1/4” and 1 1/8” thick tubing. At the present time for the project that I am working on I only need it for cutting a 1/2” plastic coated copper gas line. I have a Generac Centurion backup generator and I needed to run a new 1/2” gas line to it. I dug my 18” trench and buried the new line, then cut the line with the Ridgid tube cutter close to the unit where it is stubbed out of the ground. Now I just need to get a couple of fittings to connect it up to the tank and generator. This Ridgid tube cutter makes for an easy and quick clean cut. It is also designed to be used in tight spaces. I highly recommend it.
You definitely want this cutter if you're working with 1" or smaller copper. The compact size is great and has allowed me to work in some VERY tight spaces where nearly no other cutter could fit. Yet, it's a great cutter. You're not sacrificing anything by buying this compact tool! Ridgid nails it again.
This thing is a must have when cutting pipes. I'm currently installing conduit pipe around my outer house to enclose my security camera wires which are currently outside being exposed to the elements. Before i bought this I was using a saw that cuts metal which i used cutting the bolts of a toilet flange. This cutter cuts back on time and hassle. I just put it around the pipe and tighten it and move it around until it cuts the pipe. This tool will cut conduit and other material piping. It's a must have in your tool box. The only con i can think of is if you're going to use this for tight spaces. Don't. They're much better cutters out there. This has a knob which tighten the cutter and not good for tight spaces. Other then that this is a good tool.
I purchased this tool online and had just received it. Had a 1" older stainless steel pipe to cut. Made a score in the pipe and about 1/2 of the way through the cutting, a very important piece on the tool snapped and broke. I was unable to use it at that point and ended up completing the cut with a hacksaw.To me, it was clearly faulty manufacturing. There is nothing about using this on an older pipe so this should not have happened. I plan to return it for either a replacement or my money back, but the tool did not function to my satisfaction.
| Tool Type | Tubing Cutter, Pipe Cutter |
| Length | 8.26 cm |
| Weight | 0.5 lb |
| Cutting Capacity | 1/4 inch to 1-1/8 inch |
| Cutting Mechanism | Adjustable Screw |