Last updated at 27/06/2026 16:50:43
RIDGID 32910 10 Pipe Cutters, Silver/Black, S
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Vintage Ridgid 10 Screw Feed Tubing Cutter 32910 Usa Made Old Stock
Delivery $48.19
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
RIDGID Cutter Tube 1/8In1In 32910
Delivery between 3–8 July $9.70
Ridgid 10 (32910) 3mm - 25mm Screw Feed Tube and Conduit Cutter
Delivery $9.70
Ridgid 32910 10 Tube Cutter, 1/8-1 Inch Capacity
Delivery $52.53
originally posted on ridgid.com
This product is so easy to use and cuts so smoothly its like cutting butter with a hot knife. Blades are easy to replace, the turn know is a nice size and easy to turn. The weight of it makes the cutting effortlessly. All around great product!
originally posted on zoro.com
This is the second Ridgid tubing cutter I have purchased. The first one lasted 40 years and was fine until someone used it as a hammer and broke the frame.
originally posted on ridgid.com
I needed a tool to shorten a shotgun barrel. The other tube cutters from other manufacturers were very light weight and not recommended for steel tubing. The Ridgid Model 15 is rated for light steel tubing and is very hefty. After carefully marking the length and taping off both sides of the cut line to protect the bluing from the cutter roller I began the cutting process. After 12-15 twists around the barrel, gradually tightening the tool, the cut portion fell away. The cut itself was very clean, exactly flush and square to the barrel and required very little deburring. And the roller did not mar the existing blue finish. A couple of applications of bluing to the shiny cut mark and the finished muzzle looks just like the rest of the blued metal. I couldn't have ... MoreI needed a tool to shorten a shotgun barrel. The other tube cutters from other manufacturers were very light weight and not recommended for steel tubing. The Ridgid Model 15 is rated for light steel tubing and is very hefty. After carefully marking the length and taping off both sides of the cut line to protect the bluing from the cutter roller I began the cutting process. After 12-15 twists around the barrel, gradually tightening the tool, the cut portion fell away. The cut itself was very clean, exactly flush and square to the barrel and required very little deburring. And the roller did not mar the existing blue finish. A couple of applications of bluing to the shiny cut mark and the finished muzzle looks just like the rest of the blued metal. I couldn't have asked for a better tool for this job. It is easy to use, cuts very smoothly and precisely and the weight of this cutter eliminates any chatter or skipping out of the cut track. And you can buy replacement cutter wheels if needed. I highly recommend the Model 15 tube cutter by Ridgid. It exceeded my expectations!
| General | |
| Cross reference | 10 |
| Cutting Capacity | 1/8" to 1" |
| Overall Length | 6" |
| Handle Design | Ergonomic |
RIDGID 32910 10 Pipe Cutters, Silver/Black, S
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Vintage Ridgid 10 Screw Feed Tubing Cutter 32910 Usa Made Old Stock
Delivery $48.19
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
RIDGID Cutter Tube 1/8In1In 32910
Delivery between 3–8 July $9.70
Ridgid 10 (32910) 3mm - 25mm Screw Feed Tube and Conduit Cutter
Delivery $9.70
Ridgid 32910 10 Tube Cutter, 1/8-1 Inch Capacity
Delivery $52.53
This product is so easy to use and cuts so smoothly its like cutting butter with a hot knife. Blades are easy to replace, the turn know is a nice size and easy to turn. The weight of it makes the cutting effortlessly. All around great product!
This is the second Ridgid tubing cutter I have purchased. The first one lasted 40 years and was fine until someone used it as a hammer and broke the frame.
I needed a tool to shorten a shotgun barrel. The other tube cutters from other manufacturers were very light weight and not recommended for steel tubing. The Ridgid Model 15 is rated for light steel tubing and is very hefty. After carefully marking the length and taping off both sides of the cut line to protect the bluing from the cutter roller I began the cutting process. After 12-15 twists around the barrel, gradually tightening the tool, the cut portion fell away. The cut itself was very clean, exactly flush and square to the barrel and required very little deburring. And the roller did not mar the existing blue finish. A couple of applications of bluing to the shiny cut mark and the finished muzzle looks just like the rest of the blued metal. I couldn't have ... MoreI needed a tool to shorten a shotgun barrel. The other tube cutters from other manufacturers were very light weight and not recommended for steel tubing. The Ridgid Model 15 is rated for light steel tubing and is very hefty. After carefully marking the length and taping off both sides of the cut line to protect the bluing from the cutter roller I began the cutting process. After 12-15 twists around the barrel, gradually tightening the tool, the cut portion fell away. The cut itself was very clean, exactly flush and square to the barrel and required very little deburring. And the roller did not mar the existing blue finish. A couple of applications of bluing to the shiny cut mark and the finished muzzle looks just like the rest of the blued metal. I couldn't have asked for a better tool for this job. It is easy to use, cuts very smoothly and precisely and the weight of this cutter eliminates any chatter or skipping out of the cut track. And you can buy replacement cutter wheels if needed. I highly recommend the Model 15 tube cutter by Ridgid. It exceeded my expectations!
Works fantastic. Even though its listed to normally cut conduit it does easily cut through stainless steel tubing as long as your not overly aggressive on your cuts. Of course I've never used an industrial grade Ridgid tool that didn't work. They are definitely one of the best.
I used to use the little, small tubing cutter on my last brake job. I justified buying this one because I was saving $$$ doing the job myself. The RIDGID 32910 Model 10' ease of use and quality of cut made this tool well worth the money. In this case, you truly do get what you pay for. I'll never go back to the cheaper one.
I have used and abused this cutter for over 26 years!! I purchased it back in 1995 when I started in the piping industry and it has survived being submerged, thrown, ran over, thousands of cuts, rust, snow, the occasional dog trying to eat or fetch it, and what ever other forms of use and abuse I has put it through.It keeps on cutting! I have only ever replaced the cutting wheel and had to replace a roller because I lost the screw that held it in place in a ditch whilst cutting copper for a sewer and water lateral years back.
Great cutters and they have always worked great. Mine would cut up to 2 1/4 pipe and I had problems with them walking when cutting 2" and bigger. Just had to watch it and make sure it kept straight. Other than the fact someone wanted them more than me they are great cutters!
Bought new no.20 copper tube cutters and they walk. I have not used them very much. I tried replacing the cutting wheel and tighten the screws and no luck. Ridgid wants me to send them back. Can’t be without them for a long time. The supply house where I bought them from should just exchange them and deal with ridgid on returning them.
I wasn't sure which size would be best for home DIY projects, and didn't want to invest in a complete set of 10, 20, 30 tube/pipe cutters for something I'd only need or use very occasionally. Decided on the Ridgid #20 size and wasn't disappointed. It's big enough to tackle kitchen sink and bathroom vanity sink pipes up to 2 1/8 inches. Anything larger I probably should call the Plumber anyway. This model is solid and cuts tubing accurately and quickly, like a hot knife through butter. I'm sure this product will outlive me.
The cheap tubing cutters from places like Harbor Freight are fine if you only need to cut a few things but the $5 cutters break quickly and then into the trash they go since replacement parts aren't available. The ridgid cutter is much higher quality and will last for years plus replacement cutter wheels are available. This cutter may cost five times the price of the cheap junk cutters but will last for years! The tool was shipped quickly.
| General | |
| Cross reference | 10 |
| Cutting Capacity | 1/8" to 1" |
| Overall Length | 6" |
| Handle Design | Ergonomic |
Ridgid - Cutter Tube 1/8In-1In - 32910
Introducing the RIDGID Screw Feed Tubing and Conduit Cutter, designed for precision and ease. With a cutting capacity of 3-25mm (1/8 - 1in), this cutter delivers clean, square cuts on various materials, including copper, brass, aluminum, and thin-wall steel. The innovative X-CEL Knob allows for faster and more ergonomic operation, making your cutting tasks quicker and less strenuous. Models 10, 15, and 20 come equipped with a convenient fold-away reamer, enhancing functionality. Weighing only 0.40kg, this cutter is lightweight yet robust, perfect for both professional and DIY projects. Upgrade your toolkit with the RIDGID Screw Feed Tubing Cutter and experience the difference in performance.
Introducing the RIDGID Screw Feed Tubing and Conduit Cutter, designed for precision and ease. With a cutting capacity of 3-25mm (1/8 - 1in), this cutter delivers clean, square cuts on various materials, including copper, brass, aluminum, and thin-wall steel. The innovative X-CEL Knob allows for faster and more ergonomic operation, making your cutting tasks quicker and less strenuous. Models 10, 15, and 20 come equipped with a convenient fold-away reamer, enhancing functionality. Weighing only 0.40kg, this cutter is lightweight yet robust, perfect for both professional and DIY projects. Upgrade your toolkit with the RIDGID Screw Feed Tubing Cutter and experience the difference in performance.
Introducing the RIDGID Screw Feed Tubing and Conduit Cutter, designed for precision and ease. With a cutting capacity of 3-25mm (1/8 - 1in), this cutter delivers clean, square cuts on various materials, including copper, brass, aluminum, and thin-wall steel. The innovative X-CEL Knob allows for faster and more ergonomic operation, making your cutting tasks quicker and less strenuous. Models 10, 15, and 20 come equipped with a convenient fold-away reamer, enhancing functionality. Weighing only 0.40kg, this cutter is lightweight yet robust, perfect for both professional and DIY projects. Upgrade your toolkit with the RIDGID Screw Feed Tubing Cutter and experience the difference in performance.
Introducing the RIDGID Screw Feed Tubing and Conduit Cutter, designed for precision and ease. With a cutting capacity of 3-25mm (1/8 - 1in), this cutter delivers clean, square cuts on various materials, including copper, brass, aluminum, and thin-wall steel. The innovative X-CEL Knob allows for faster and more ergonomic operation, making your cutting tasks quicker and less strenuous. Models 10, 15, and 20 come equipped with a convenient fold-away reamer, enhancing functionality. Weighing only 0.40kg, this cutter is lightweight yet robust, perfect for both professional and DIY projects. Upgrade your toolkit with the RIDGID Screw Feed Tubing Cutter and experience the difference in performance.
in 5 offers
The lowest price for Ridgid - Cutter Tube 1/8In-1In - 32910 right now is $46.44 at eBay.com.au, compared across 5 retailers.
The all-time low was $45.67 on 21 June 2026 — today's price is 2% above the lowest ever. This is at or near its all-time low — a good time to buy.
Prices last updated 27 June 2026.
