The WS2 is a high quality pop filter, designed to provide additional protection for the microphone capsule against any wind noise. This pop filter fits the majority of applications to avoid any sounds that overloads the microphone. Product Features in Detail Provides additional protection The WS2 windshield provides additional protection for the microphone capsule against any wind noise or plosives.
The WS2 is a high quality pop filter, designed to provide additional protection for the microphone capsule against any wind noise. This pop filter fits the majority of applications to avoid any sounds that overloads the microphone. Product Features in Detail Provides additional protection The WS2 windshield provides additional protection for the microphone capsule against any wind noise or plosives.
Rode WS2 Pop Filter
The WS2 is a high quality pop filter, designed to provide additional protection for the microphone capsule against any wind noise. This pop filter fits the majority of applications to avoid any sounds that overloads the microphone. Product Features in Detail Provides additional protection The WS2 windshield provides additional protection for the microphone capsule against any wind noise or plosives.
The WS2 is a high quality pop filter, designed to provide additional protection for the microphone capsule against any wind noise. This pop filter fits the majority of applications to avoid any sounds that overloads the microphone. Product Features in Detail Provides additional protection The WS2 windshield provides additional protection for the microphone capsule against any wind noise or plosives.
in 34 offers
The lowest price for Rode WS2 Pop Filter right now is $16.00 at Umart, compared across 33 retailers.
The all-time low was $9.99 on 8 Mar 2026 — today's price is 60% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 10 June 2026.
Last updated at 10/06/2026 05:32:53
Rode WS2 Pop Filter / Wind Shield
30-day returns
Rode WS2 Foam Windscreen
Rode WS2 Wind Shield
Delivery between 13–17 June $10
Rode WS2 To Suit NT1, NT1000, NT2A, NT2000, NTK, K2, Podcaster, Broadcaster And NTUSB
Delivery $15
Rode WS2 Pop Filter/Wind Shield
Delivery $9.90
RODE WS2 Pop Filter Windshield
Delivery between 12–18 June $9
Rode Microphones Rode Ws2 Windshield For Broadcaster Microphones
Delivery $30.57
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Rode Ws2 Pop Filter Windshield For Larger Microphones
Delivery $9.99
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
RODE WS2 Pop Filter / Wind Shield
Delivery $6.90
RODE WS2 Foam Pop Filter/Windshield
Delivery $10
originally posted on mannys.com.au
Very snug fit on to the Rode Procaster mic and it does the job of preventing plosives when you're up close. Cant pick any change to the tonality from using it, and this correctly shaped bit of acoustic foam just does the job perfectly. It would be quite the challenge to go wrong with it.
originally posted on djcity.com.au
Works well: no/minimal plosivesFits well: opening stretches easily to accommodate mics on the larger end of the specified range (my Behringer C-1's 54mm shaft diameter) and I imagine it fits fine on smaller mics (seemingly 50mm+ shaft diameter when looking at the 'compatible' Rode mics, to mics a fair bit wider than mine)Good price: cheaper than some equivalent optionsI was looking for a pop filter that had a smaller 'footprint' than the screen pop filters (for desktop use, not professional recording) and this fit the bill! Overall it's slightly larger than I thought it would be but not an issue. Regardless, the dimensions are clearly stated, I just didn't think about it beforehand.
originally posted on bhphotovideo.com
Fits very well and blocks 99% of plosives from having the mic directly in front of your mouth with extremely poor mic technique. It does reduce the high end but, in my mind it just tames the nearly 10db boosts they added for clarity. Would I buy it again? Well no, but that is only because Rode is coming out with a version specifically for the Podmic. You can see it on the Podmic usb.
| PC Parts | > |
| Peripherals | > |
| Microphones | > |
| Manufacturer Warranty | 1 Year |
| Offical Product Link | Open Link |
Rode WS2 Pop Filter / Wind Shield
30-day returns
Rode WS2 Foam Windscreen
Rode WS2 Wind Shield
Delivery between 13–17 June $10
Rode WS2 To Suit NT1, NT1000, NT2A, NT2000, NTK, K2, Podcaster, Broadcaster And NTUSB
Delivery $15
Rode WS2 Pop Filter/Wind Shield
Delivery $9.90
Very snug fit on to the Rode Procaster mic and it does the job of preventing plosives when you're up close. Cant pick any change to the tonality from using it, and this correctly shaped bit of acoustic foam just does the job perfectly. It would be quite the challenge to go wrong with it.
Works well: no/minimal plosivesFits well: opening stretches easily to accommodate mics on the larger end of the specified range (my Behringer C-1's 54mm shaft diameter) and I imagine it fits fine on smaller mics (seemingly 50mm+ shaft diameter when looking at the 'compatible' Rode mics, to mics a fair bit wider than mine)Good price: cheaper than some equivalent optionsI was looking for a pop filter that had a smaller 'footprint' than the screen pop filters (for desktop use, not professional recording) and this fit the bill! Overall it's slightly larger than I thought it would be but not an issue. Regardless, the dimensions are clearly stated, I just didn't think about it beforehand.
Fits very well and blocks 99% of plosives from having the mic directly in front of your mouth with extremely poor mic technique. It does reduce the high end but, in my mind it just tames the nearly 10db boosts they added for clarity. Would I buy it again? Well no, but that is only because Rode is coming out with a version specifically for the Podmic. You can see it on the Podmic usb.
Fits perfectly on my RØDE NT1. Very well designed and is of decent quality. The price is very reasonable - this is one of those products where RØDE could have gotten away with really jacking the RRP up if they wanted. So kudos to them and also to DJ City for the safe packaging and prompt delivery (as always).
The wind screen is great. The source of the wind screen was lousy because it came three days late. I checked with our local Post Office in Guthrie, Oklahoma and they told me that when it shipped from Unique Photo Inc. it was shipped to the next destination and returned four times. Then it was shipped to Cincinnati Ohio which it should have never been shipped there. It was returned and shipped to Houston Texas and then to Dallas before being shipped to Oklahoma City and then to Guthrie. Therefore I am rating this a 1-star.
I had just purchased a Rode Pod mic and wanted a good windscreen for it. I looked at many from different web sites until I came to a video review of the Rode WS2. The person in the video said although Rode does not say this windscreen is for the pod mic, that he proved it actually fits perfectly and showed in the video that it worked. So instead of measuring the mic and trying to figure out if one would work and then getting it and it is not the right size, I went ahead and ordered this and it fits perfectly. Don't spend time looking for something like I did. Just go ahead and spend the extra money and order this one.
These things are probably overprices for a piece of foam. But it's the correct size and just what I needed. I've been leaving my microphones out in the studio and although small, there is some dust that settles on surfaces. I wanted to have these to protect the mics from the dust. I do Have round Pop screens to protect from spit and plosives, but I'll have to do a comparison to see if these work better or worse than those as far as sound.
Much better solution for the Rode Procasters I am using it on than a flat screen. This looks better...works better. Leave a small gap when you install the cover over the mic between the top of the mic and where the windscreen would potentially touch. This gap creates another barrier to protect from POPS. Also - I would buy these just to protect the mic over time with water (spit) hitting the mic and causing a potential slow damage to the mic.
This is a high-quality product. Much better than Amazon related knock offs. Does a great job as a pop Shield as well as windscreen. Very thick and high-quality material easily washable. I see this lasting for a very long time. Optimal applications with being for podcasting / Broadcasting. be Can be used for recording singing vocals very well; the best of course would be using a high quality pop Shield. I'm actually using this to record vocals with my Rode condenser microphone and high-quality mic pre, and I am very pleased.
This thing costs next to nothing and the difference between before and after are HUGE! I use it on my Rode Procaster. It is pretty big and bulky but it alo looks insanely professional!I've tested it several times and I'm just gonna say, WOW! I use it every time I use my Procaster. You actually NEED this if you want a more professional sound!Highly recommend!
| PC Parts | > |
| Peripherals | > |
| Microphones | > |
| Manufacturer Warranty | 1 Year |
| Offical Product Link | Open Link |