Last updated at 12/05/2026 04:57:52
Taubmans Water Based Enamel Semi Gloss White - 10L - 121410/10L White Exchange Half / 10L - Semi Gloss
Delivery $39
Taubmans 10L White Semi Gloss Water Based Enamel Paint
Delivery $55
Taubmans 10L White Semi Gloss Water Based Enamel Paint
Free next-day delivery
Taubmans Water Based Enamel Semi Gloss- White 10L
Taubmans 10l White Semi Gloss Water Based Enamel Paint
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
originally posted on bunnings.com.au
I used this for the first time on doors and trims.The finish is amazing for a water based product Check photos.Great gloss coverage and very easy to clean and apply.Used it over Taubmans 3 in 1 undercoat.So all door and trims were udercoated first and then Enamel over that.Recommended to me by a painter fried. Used foam roller for application and went on smooth as silk
originally posted on bunnings.com.au
Don’t waste your money. Unless you are painting the same colour that has already been painted with an oil based gloss paint and your doing a refresh. When they say water based it well and truly is……feels like more water than paint in the tin I bought. Even two coats still doesn’t give a good coverage.
originally posted on bunnings.com.au
I love the glossy, enamel finish of this paint, and have used the white for all my skirting boards, door frames and window frames.There is a bit of a learning curve associated with using this paint because it starts drying very quickly once applied, so if you over-work it, you'll get a blobby texture from the partially-dried sections, which can be annoying. The best way to avoid this is by using three or four quick, light coats - waiting for each coat to dry well before applying the next.I'm really happy with the results I've had and would not select any other paint/finish for the areas I've used this on.
Taubmans Water Based Enamel Semi Gloss White - 10L - 121410/10L White Exchange Half / 10L - Semi Gloss
Delivery $39
Taubmans 10L White Semi Gloss Water Based Enamel Paint
Delivery $55
Taubmans 10L White Semi Gloss Water Based Enamel Paint
Free next-day delivery
Taubmans Water Based Enamel Semi Gloss- White 10L
Taubmans 10l White Semi Gloss Water Based Enamel Paint
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
I used this for the first time on doors and trims.The finish is amazing for a water based product Check photos.Great gloss coverage and very easy to clean and apply.Used it over Taubmans 3 in 1 undercoat.So all door and trims were udercoated first and then Enamel over that.Recommended to me by a painter fried. Used foam roller for application and went on smooth as silk
Don’t waste your money. Unless you are painting the same colour that has already been painted with an oil based gloss paint and your doing a refresh. When they say water based it well and truly is……feels like more water than paint in the tin I bought. Even two coats still doesn’t give a good coverage.
I love the glossy, enamel finish of this paint, and have used the white for all my skirting boards, door frames and window frames.There is a bit of a learning curve associated with using this paint because it starts drying very quickly once applied, so if you over-work it, you'll get a blobby texture from the partially-dried sections, which can be annoying. The best way to avoid this is by using three or four quick, light coats - waiting for each coat to dry well before applying the next.I'm really happy with the results I've had and would not select any other paint/finish for the areas I've used this on.
This paint worked so well to cover a bright yellow door in one coat! I have painted other doors and trim using another brand of paint (was not enamel, but was marked for trim) and it took 10 coats and the yellow still came through. This just had one coat and the yellow was gone, did a second coat for good measure.Obviously it takes some time to dry, but I did two coats in one day. It was a particularly warm day as well.
Painted my kitchen doors firstly with a primer - no worries. Then used this paint with monument tint. Allowed two days to dry and it was still tacky. Gave it a second coat and it's stick tacky after another 2 days, one of those outside in the sun on a 28deg C day.
Had high hopes for this paint but unfortunately it did not deliver. Just to paint a door required 6 coats! The paint is too ‘thin’ and dries quickly which means you constantly get roller marks in the finish. I’m no paint expert but I think a paint that is thicker and dries slower would be better suited.
Easy paint to use. Looks great and covers well. I used it on my doors throughout the house. AAA
Excellent, product will only use this now
Just used this on my old cupboards and doors. They came up a treat. I would recommend giving the paint tin a really good stir as it's very thick at the bottom. Paint is very thick and I wet my brush slightly for the first coat, some needed 2 coats others 3 it depended on how much water I had on brush. I'm very happy with this product, just don't forget to stir paint thoroughly to the very bottom of tin :)
After a less than satisfactory experience with British Paints Paint&Prime Doors Windows and Trim, I tried out Taubmans. The difference is really significant.Taubmans has better opacity than the British, so you are only going to need to do 2 coats as opposed to 3 or 4. You still need to prime on new surfaces though, or you will find you need a third coat.As usual with MDF, make sure you sand the "endgrain" after the primer to achieve a smoother finish. Tip: You can use jointing compound to fill accidental gouges from a chisel, it sands very smooth and sticks well..As usual with enamel paints, don't fiddle with it after laying off. I did find the Taubmans to be more forgiving than the British if you are like me and can't leave things alone.I did spend a long ... MoreAfter a less than satisfactory experience with British Paints Paint&Prime Doors Windows and Trim, I tried out Taubmans. The difference is really significant.Taubmans has better opacity than the British, so you are only going to need to do 2 coats as opposed to 3 or 4. You still need to prime on new surfaces though, or you will find you need a third coat.As usual with MDF, make sure you sand the "endgrain" after the primer to achieve a smoother finish. Tip: You can use jointing compound to fill accidental gouges from a chisel, it sands very smooth and sticks well..As usual with enamel paints, don't fiddle with it after laying off. I did find the Taubmans to be more forgiving than the British if you are like me and can't leave things alone.I did spend a long time deciding between the taubmans lineup and I feel they could simplify a little bit here.Easycoat Gloss Doors & Trims - I am told this is a "glorified wall paint" which isn't really as good as this. This is only a little more expensive so I'd rather pay more for the better paint.Oil based enamel - A smoother and easier finish but I didn't want the cleanup complexity or the yellowingUltimate Enamel - Smoother and easier finish but yellowsI'll be using this Water Based Enamel again.
Taubmans 10L White Semi Gloss Water Based Enamel
Taubmans Water Based Enamel Semi Gloss White Features Use it for doors, windows and trims. Can be cleaned easily (shield the surface from sweat, cleaning agents and grease) Long lasting 75% - 100% - Gloss level. Anti- microbial and environmentally friendly Allergy-friendly Asthma-friendly Premium Enamel product with the latest grease-resistant LTA+ Technology . Application Process Firstly prepare surface Clean and dry the surface. Mould needs to be treated with bleach and rinsed with fresh water then. All surface defects need to be filled with a suitable filler. Using masking tape on wall and ceiling paints is not recommended. Applying on new work Apply Taubmans 3 in 1 once on surfaces such as timber, masonry and paper faced plasterboard. If surfaces previously painted All flaking and loose paint need to be removed. Then sand with fine paper surfaces. Prime before paint if it is necessary. Apply Taubmans 3 in 1 to make sure surfaces are even. Undercoat surfaces which were painted before. Application steps Check colour before use. Applying two coats using a 4mm – 6mm (nap or pile length) roller or brush is recommended. Put thin coats as a thick coat will cause runs to appear. Use a roller if a large area needs to be painted. Mix paint for 5 minutes before use 30 minutes is a Drying time (touch dry) After 2 hours at 25°C and 4 hours in cold or humid areas Recoat If temperatures below 10°C Do not paint Covered area Coverage depends on the surface roughness. Up to 16 m2 per litre. Further Product Information: SDS Taubmans Water Based Enamel Semi Gloss White - 10L SENSITIVE CHOICE National Asthma Council Australia’s Sensitive Choice Program approved the product. LOW VOC Indoor air quality is improved. VOC* levels lowered to 16g/1L. LTA+ TECHNOLOGY Shield the surface from sweat, cleaning agents and grease and Long lasting.
Taubmans Water Based Enamel Semi Gloss White Features Use it for doors, windows and trims. Can be cleaned easily (shield the surface from sweat, cleaning agents and grease) Long lasting 75% - 100% - Gloss level. Anti- microbial and environmentally friendly Allergy-friendly Asthma-friendly Premium Enamel product with the latest grease-resistant LTA+ Technology . Application Process Firstly prepare surface Clean and dry the surface. Mould needs to be treated with bleach and rinsed with fresh water then. All surface defects need to be filled with a suitable filler. Using masking tape on wall and ceiling paints is not recommended. Applying on new work Apply Taubmans 3 in 1 once on surfaces such as timber, masonry and paper faced plasterboard. If surfaces previously painted All flaking and loose paint need to be removed. Then sand with fine paper surfaces. Prime before paint if it is necessary. Apply Taubmans 3 in 1 to make sure surfaces are even. Undercoat surfaces which were painted before. Application steps Check colour before use. Applying two coats using a 4mm – 6mm (nap or pile length) roller or brush is recommended. Put thin coats as a thick coat will cause runs to appear. Use a roller if a large area needs to be painted. Mix paint for 5 minutes before use 30 minutes is a Drying time (touch dry) After 2 hours at 25°C and 4 hours in cold or humid areas Recoat If temperatures below 10°C Do not paint Covered area Coverage depends on the surface roughness. Up to 16 m2 per litre. Further Product Information: SDS Taubmans Water Based Enamel Semi Gloss White - 10L SENSITIVE CHOICE National Asthma Council Australia’s Sensitive Choice Program approved the product. LOW VOC Indoor air quality is improved. VOC* levels lowered to 16g/1L. LTA+ TECHNOLOGY Shield the surface from sweat, cleaning agents and grease and Long lasting.
Taubmans Water Based Enamel Semi Gloss White Features Use it for doors, windows and trims. Can be cleaned easily (shield the surface from sweat, cleaning agents and grease) Long lasting 75% - 100% - Gloss level. Anti- microbial and environmentally friendly Allergy-friendly Asthma-friendly Premium Enamel product with the latest grease-resistant LTA+ Technology . Application Process Firstly prepare surface Clean and dry the surface. Mould needs to be treated with bleach and rinsed with fresh water then. All surface defects need to be filled with a suitable filler. Using masking tape on wall and ceiling paints is not recommended. Applying on new work Apply Taubmans 3 in 1 once on surfaces such as timber, masonry and paper faced plasterboard. If surfaces previously painted All flaking and loose paint need to be removed. Then sand with fine paper surfaces. Prime before paint if it is necessary. Apply Taubmans 3 in 1 to make sure surfaces are even. Undercoat surfaces which were painted before. Application steps Check colour before use. Applying two coats using a 4mm – 6mm (nap or pile length) roller or brush is recommended. Put thin coats as a thick coat will cause runs to appear. Use a roller if a large area needs to be painted. Mix paint for 5 minutes before use 30 minutes is a Drying time (touch dry) After 2 hours at 25°C and 4 hours in cold or humid areas Recoat If temperatures below 10°C Do not paint Covered area Coverage depends on the surface roughness. Up to 16 m2 per litre. Further Product Information: SDS Taubmans Water Based Enamel Semi Gloss White - 10L SENSITIVE CHOICE National Asthma Council Australia’s Sensitive Choice Program approved the product. LOW VOC Indoor air quality is improved. VOC* levels lowered to 16g/1L. LTA+ TECHNOLOGY Shield the surface from sweat, cleaning agents and grease and Long lasting.
Taubmans Water Based Enamel Semi Gloss White Features Use it for doors, windows and trims. Can be cleaned easily (shield the surface from sweat, cleaning agents and grease) Long lasting 75% - 100% - Gloss level. Anti- microbial and environmentally friendly Allergy-friendly Asthma-friendly Premium Enamel product with the latest grease-resistant LTA+ Technology . Application Process Firstly prepare surface Clean and dry the surface. Mould needs to be treated with bleach and rinsed with fresh water then. All surface defects need to be filled with a suitable filler. Using masking tape on wall and ceiling paints is not recommended. Applying on new work Apply Taubmans 3 in 1 once on surfaces such as timber, masonry and paper faced plasterboard. If surfaces previously painted All flaking and loose paint need to be removed. Then sand with fine paper surfaces. Prime before paint if it is necessary. Apply Taubmans 3 in 1 to make sure surfaces are even. Undercoat surfaces which were painted before. Application steps Check colour before use. Applying two coats using a 4mm – 6mm (nap or pile length) roller or brush is recommended. Put thin coats as a thick coat will cause runs to appear. Use a roller if a large area needs to be painted. Mix paint for 5 minutes before use 30 minutes is a Drying time (touch dry) After 2 hours at 25°C and 4 hours in cold or humid areas Recoat If temperatures below 10°C Do not paint Covered area Coverage depends on the surface roughness. Up to 16 m2 per litre. Further Product Information: SDS Taubmans Water Based Enamel Semi Gloss White - 10L SENSITIVE CHOICE National Asthma Council Australia’s Sensitive Choice Program approved the product. LOW VOC Indoor air quality is improved. VOC* levels lowered to 16g/1L. LTA+ TECHNOLOGY Shield the surface from sweat, cleaning agents and grease and Long lasting.
in 28 offers
The lowest price for Taubmans 10L White Semi Gloss Water Based Enamel right now is $245.90 at PaintAccess.com.au, compared across 5 retailers.
The all-time low was $170.00 on 18 Apr 2024 — today's price is 45% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 12 May 2026.
