Victron Blue Smart IP22 SLA/LiFePO4 Charger 12V 30A Single Output Fan Assisted - by Outbax
The Victron Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Bluetooth Smart The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure. Also charges Li-ion (LiFePO4) batteries LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended Manually. Protected against overheating Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION. **Note: Battery Cable not included
The Victron Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Bluetooth Smart The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure. Also charges Li-ion (LiFePO4) batteries LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended Manually. Protected against overheating Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION. **Note: Battery Cable not included
The Victron Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Bluetooth Smart The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure. Also charges Li-ion (LiFePO4) batteries LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended Manually. Protected against overheating Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION. **Note: Battery Cable not included
The Victron Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Bluetooth Smart The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure. Also charges Li-ion (LiFePO4) batteries LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended Manually. Protected against overheating Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION. **Note: Battery Cable not included
in 2 offers
The lowest price for Victron Blue Smart IP22 SLA/LiFePO4 Charger 12V 30A Single Output Fan Assisted - by Outbax right now is $309.00 at Outbax, compared across 2 retailers.
The all-time low was $309.00 on 23 Aug 2025. That's the lowest price we've ever tracked — a great time to buy.
Prices last updated 2 July 2026.
Last updated at 02/07/2026 11:16:28
Victron 12V 30A SLA/LiFePO4 Charger - by Outbax
Free delivery
Victron Charger - 240V to 12V Vehicle Charger 30Amp Charger
Delivery between 7–9 July $9.90
originally posted on livestainable.co.za
Basically the best brand in the industry, so you know you're getting a quality product.However, one star lost due to:1) No South African plug - their Type F plug has an earth connection, which almost all Type F to Type M (our plug type) adapters in South Africa do not have. So you either have to hunt for one with the metal contacts to include an earth connection, or change out the plug and (hopefully not) void the warranty.2) Some unexpected delays in stock and shipping from LiveStainable.
originally posted on ebay.com
I went for this charger as it has three outputs to allow charging of three 12v batteries at the same time. It has selectable 15 or 30A output, 14.3 or 14.7V depending on standard lead acid or AGM, EFB, EFB+. The real bonus was having Bluetooth to monitor the charge, set charging parameters via the app then send to the charger and view history. The charger can also be placed in supply mode for supporting your battery should you be doing things on your car with the ignition on (engine off). Obviously you would not try updating ecu software as 30A is not enough for that, but great little charger. Having the little Bluetooth battery monitor, a second voltage readout display and a sturdy storage box for this price is a no brainer. I normally buy CETEK chargers but the ... MoreI went for this charger as it has three outputs to allow charging of three 12v batteries at the same time. It has selectable 15 or 30A output, 14.3 or 14.7V depending on standard lead acid or AGM, EFB, EFB+. The real bonus was having Bluetooth to monitor the charge, set charging parameters via the app then send to the charger and view history. The charger can also be placed in supply mode for supporting your battery should you be doing things on your car with the ignition on (engine off). Obviously you would not try updating ecu software as 30A is not enough for that, but great little charger. Having the little Bluetooth battery monitor, a second voltage readout display and a sturdy storage box for this price is a no brainer. I normally buy CETEK chargers but the Bluetooth and three outputs was the kicker, other items very a bonus.
originally posted on mlperformance.co.uk
I must say i am thoroughly impressed with how this company does business. I had the wrong item turn up, contacted ML Performance and within 15 minutes they had sorted a replacement item to be sent out the very next day and the return was done via the courier driver. The new item turned up, exactly what was ordered, got it fitted and it looks and performs sweet. I always think anyone can mess up, we're only human afterall, it's how things are dealt with that counts and on that basis alone, i couldn't recommend them enough. Thanks guys and i look forward to buying from you in the future!
| Input voltage range | 180 – 265 VAC |
| Charge current, normal mode | 15 / 20 / 30 A |
| Charge current, NIGHT or LOW | 7,5 / 10 / 15 A |
| Efficiency | 93 % |
| No load power consumption | 0.5 W |
Victron 12V 30A SLA/LiFePO4 Charger - by Outbax
Free delivery
Victron Charger - 240V to 12V Vehicle Charger 30Amp Charger
Delivery between 7–9 July $9.90
Basically the best brand in the industry, so you know you're getting a quality product.However, one star lost due to:1) No South African plug - their Type F plug has an earth connection, which almost all Type F to Type M (our plug type) adapters in South Africa do not have. So you either have to hunt for one with the metal contacts to include an earth connection, or change out the plug and (hopefully not) void the warranty.2) Some unexpected delays in stock and shipping from LiveStainable.
I went for this charger as it has three outputs to allow charging of three 12v batteries at the same time. It has selectable 15 or 30A output, 14.3 or 14.7V depending on standard lead acid or AGM, EFB, EFB+. The real bonus was having Bluetooth to monitor the charge, set charging parameters via the app then send to the charger and view history. The charger can also be placed in supply mode for supporting your battery should you be doing things on your car with the ignition on (engine off). Obviously you would not try updating ecu software as 30A is not enough for that, but great little charger. Having the little Bluetooth battery monitor, a second voltage readout display and a sturdy storage box for this price is a no brainer. I normally buy CETEK chargers but the ... MoreI went for this charger as it has three outputs to allow charging of three 12v batteries at the same time. It has selectable 15 or 30A output, 14.3 or 14.7V depending on standard lead acid or AGM, EFB, EFB+. The real bonus was having Bluetooth to monitor the charge, set charging parameters via the app then send to the charger and view history. The charger can also be placed in supply mode for supporting your battery should you be doing things on your car with the ignition on (engine off). Obviously you would not try updating ecu software as 30A is not enough for that, but great little charger. Having the little Bluetooth battery monitor, a second voltage readout display and a sturdy storage box for this price is a no brainer. I normally buy CETEK chargers but the Bluetooth and three outputs was the kicker, other items very a bonus.
I must say i am thoroughly impressed with how this company does business. I had the wrong item turn up, contacted ML Performance and within 15 minutes they had sorted a replacement item to be sent out the very next day and the return was done via the courier driver. The new item turned up, exactly what was ordered, got it fitted and it looks and performs sweet. I always think anyone can mess up, we're only human afterall, it's how things are dealt with that counts and on that basis alone, i couldn't recommend them enough. Thanks guys and i look forward to buying from you in the future!
I contacted ML Performance . I emailed ML to verify it was actually in stock. Mika replied quickly and answered all my questions. She even verified they had the item in-person! Once I felt comfortable with the purchase and ordered the unit, it took only 3 business days to arrive from the UK to the USA, and I could track it via DHL the entire time! While initially nervous Im glad I did. I wouldnt hesitate to recommend ML Performance in the future.
Well, I just wanted to give my opinion. I made the normal purchase like any other customer. A few days later I had a problem. I had to make an important trip. Contact ml performance by email to say that the contact service via email is spectacular. I never had a service like that with another store. well I told them that I needed the super urgent material. and well after a great job of coordination and good work from ml performance I received the material and everything went perfect. In general I recommend ml performance and I hope to work with them again in future purchases. thank you
Ive made 3 orders with ML performance now, and have been very satisfied every time. Great value, great communication and service, fast delivery. The quality has been great every time too. Also, only a small touch, but a hand written note in my last package to say thanks for the order. How nice is that!! Keep up the good work!
If you have the bmw m235i you know how fantastic it is! But if I had one complaint it would be the car doesn't sound as fast as it goes. So I found ML Performances and looked into this rear box delete. It sounds amazing! It's a must have product! The quality of the pipe work and welding is unmatched, It fits well also. Depending on your preference the tips provided are fine for the price but the ends of the tips where not rolled and where clean cut.. meaning they where pretty sharp so amending this is important if you dont want to cut yourself when washing the car. Also be aware the sound is very cool but you may come across a little bit of drone.. its expected but two ways to fix this is by when at low speeds just easing off the throttle a little more than you ... MoreIf you have the bmw m235i you know how fantastic it is! But if I had one complaint it would be the car doesn't sound as fast as it goes. So I found ML Performances and looked into this rear box delete. It sounds amazing! It's a must have product! The quality of the pipe work and welding is unmatched, It fits well also. Depending on your preference the tips provided are fine for the price but the ends of the tips where not rolled and where clean cut.. meaning they where pretty sharp so amending this is important if you dont want to cut yourself when washing the car. Also be aware the sound is very cool but you may come across a little bit of drone.. its expected but two ways to fix this is by when at low speeds just easing off the throttle a little more than you would normally. And when in sport mode (the pops are like gun shots) it's best to remove the exhaust audio fuse as it causes drone. Ps its unlikely to pass an mot, best to know your mot garage well or keep the old silencer and swap it back over for test.
I have been really impressed with ML Performance. The website was easy to use and the response to my questions rapid. My itemswere delivered within 48 hrs. There was also a hand-written note from Charlotte in the packaging which was a great touch. Really good service and will definitely use again. Many thanks
Dealing with Marshall and the team was an absolute pleasure. Rarely do you find businesses with such integrity.I purchased four items (some very fragile) and had them delivered to Australia in less than two weeks. Two items were showing very minor defects that I was not completely satisfied with. I contacted ML Performance via email and Marshall went above and beyond to exchange the items at their cost no questions asked. He then took the trouble to follow up and ensure that I was completely satisfied with my overall purchase.Rest assured that you can purchase from ML Performance with complete confidence.My rating.Communication: 5 starsProducts: 5 starsEase of exchange: 5 starsBusiness Ethics: 6 stars
My IP22 charger has completed one charging cycle of a 200 Ah LiFePo4 battery with no functional issues. I monitored the charging cyle using the VictronConnect app on my iPhone. Seeing the exact charging voltage and current during the charging process is informative as a supplement to the basic LED light information on the IP22 itself. I opted not to change the charging parameters from the default LiFePo4 settings, although I did review the ‘Advanced’ then ‘Expert' parameters. (Note: As soon the VictronConnect app connected to the new IP22 it insisted on installing a firmware update to v3.42 while reporting the current firmware version as “none”).I was mildly surprised that the VictronConnect app requires continual Bluetooth contact with the IP22 in order to ... MoreMy IP22 charger has completed one charging cycle of a 200 Ah LiFePo4 battery with no functional issues. I monitored the charging cyle using the VictronConnect app on my iPhone. Seeing the exact charging voltage and current during the charging process is informative as a supplement to the basic LED light information on the IP22 itself. I opted not to change the charging parameters from the default LiFePo4 settings, although I did review the ‘Advanced’ then ‘Expert' parameters. (Note: As soon the VictronConnect app connected to the new IP22 it insisted on installing a firmware update to v3.42 while reporting the current firmware version as “none”).I was mildly surprised that the VictronConnect app requires continual Bluetooth contact with the IP22 in order to display any information; it does not appear to store information from the last contact to display on its pages to make it easier to record that data at a distance from the IP22. I tried using the built-in option to send the “ChargeCycleHistory” to my computer, but the file I received only had column headers without the data for the charge cycle even though the VictronConnect app shows a completed charge cycle on the screen. I don’t know whether this is due to my error, a poor understanding of the user interface, or an actual flaw in the VictronConnect app at this time. (I gave the IP22 five stars with the expectation that I’ll figure out the history file transmission issue.)To complete the electrical connection from the IP22 to the batteries I am charging I constructed a charging harness using two 5’ segments of 6 AWG wire and 5/16” crimped lugs sealed with 1/2” 3:1 adhesive shrink wrap. I trimmed/stripped insulation from the other ends of the 6 AWG wires to insert them into the IP22’s screw-clamp terminals. Although it was extra work/cost to build a charging harness compared to battery chargers with pre-attached clamps, the high charging current (30A) of the IP22 30A model would heat up the typical thin cables and clamps provided with lower current chargers for temporary connections. A permanent installation of the IP22 wouldn’t work well with clamp-on connections.The IP22 30A 12VDC charger runs fairly warm/hot to the touch while charging at 30A; the built-in fan kicked in as an aid to cooling it. If I were mounting the charger in a permanent location I would take the heat into consideration with respect to airflow and the material I mounted the charger to/had surrounding it. I place the charger in a location that won’t be affected by its heat while using it as a portable charging device.I did not try out the half-power “nighttime” charge setting as I’m not charging batteries in a location where what little noise the charger makes is an issue. If I were going to be sleeping next to it I might use that option.
| Input voltage range | 180 – 265 VAC |
| Charge current, normal mode | 15 / 20 / 30 A |
| Charge current, NIGHT or LOW | 7,5 / 10 / 15 A |
| Efficiency | 93 % |
| No load power consumption | 0.5 W |
