Last updated at 13/05/2026 08:00:23
Wera 05073270001 Ratcheting Combination Wrench - Joker 10x159mm
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
05073270001 WERA Wrench: combination spanner
Delivery $21.97
Wera Joker Combination Ratchet Spanner 10 mm 05073270001
Delivery $11.20
Wera Joker Ratcheting Combination Wrench - 10mm
Delivery $24.76
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Wera 5073270001 Tools, One Size, Factory
Delivery $313.16
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Wera Joker Combination Ratchet Spanner, 10 Mm, 05073270001
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Wera 73270 Joker Ratcheting Combination Wrench Japan
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Wera 073270 6000 10mm Joker Ratchet Combination Spanner
10mm Wera Joker 6000 Combination Ratchet Spanners
Delivery $28.10
Wera 6000 Joker 10mm Ratchet Combination Wrench
Delivery between 15–20 May $9.90
originally posted on screwfix.com
I admit I was hoping for a spanner that would hold a nut (or a bolt) - as it's the usual expensive Wera brand, but it's more like a spoon - it'll hold a nut only if it is upright, but if you tip the spanner for a horizontal bolt, the nut will drop out (which is what I wanted it held for in a tight place). Also if you have little clearance and you get the nut/bolt in place, you may not be able to get the spanner off it when tightened. I'll go back to putting sticky tape over my spanners to hold nuts.
originally posted on screwfix.com
I bought both 8mm and 10mm. I admit I was hoping for a spanner that would hold a nut (or a bolt) - as it's the usual expensive usually excellent Wera brand, but it's more like a spoon - it'll hold a nut only if it is upright, but if you tip the spanner for a horizontal bolt, the nut will drop out (which is what I wanted it held for in a tight place). Also if you have little clearance and you get the nut/bolt in place, you may not be able to get the spanner off it when tightened. I'll go back to putting sticky tape over my spanners to hold nuts.
originally posted on toolstation.com
Best ratchet spanner I have ever owned. Got me out of a pickle in a tight spot.The black plastic thing for holding the nut in the open end is just a gimmick IMO.
| Finish | Nickel Chrome Coating |
| Total Length (L) | 159mm |
| Material Specifications | Chrome Molybdenum Steel |
| Spanner Size (J) | 10mm |
| Open End Head Width | 22mm |
Wera 05073270001 Ratcheting Combination Wrench - Joker 10x159mm
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
05073270001 WERA Wrench: combination spanner
Delivery $21.97
Wera Joker Combination Ratchet Spanner 10 mm 05073270001
Delivery $11.20
Wera Joker Ratcheting Combination Wrench - 10mm
Delivery $24.76
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Wera 5073270001 Tools, One Size, Factory
Delivery $313.16
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
I admit I was hoping for a spanner that would hold a nut (or a bolt) - as it's the usual expensive Wera brand, but it's more like a spoon - it'll hold a nut only if it is upright, but if you tip the spanner for a horizontal bolt, the nut will drop out (which is what I wanted it held for in a tight place). Also if you have little clearance and you get the nut/bolt in place, you may not be able to get the spanner off it when tightened. I'll go back to putting sticky tape over my spanners to hold nuts.
I bought both 8mm and 10mm. I admit I was hoping for a spanner that would hold a nut (or a bolt) - as it's the usual expensive usually excellent Wera brand, but it's more like a spoon - it'll hold a nut only if it is upright, but if you tip the spanner for a horizontal bolt, the nut will drop out (which is what I wanted it held for in a tight place). Also if you have little clearance and you get the nut/bolt in place, you may not be able to get the spanner off it when tightened. I'll go back to putting sticky tape over my spanners to hold nuts.
Best ratchet spanner I have ever owned. Got me out of a pickle in a tight spot.The black plastic thing for holding the nut in the open end is just a gimmick IMO.
I bought two of these. They're not cheap. To the point that I could buy multiple cheap sets for the price of two individual spanners. That said and done, I wouldn't go back to the cheap ones now. As someone who installs industrial containment every day, these make my life easier, and as long as they don't break they're the best spanners I've used so far.
I've purchased one of these the other day from eBay as my other 10mm spanner broke, to be honest they have always seemed a little overpriced for my liking, I got a very good deal on this one and so very pleased that I have taken the plunge, it is extremely comfortable in the hand and on the wrist, the feel and quality of the spanner is absolutely outstanding, feels and looks like that it will last a lifetime, quality of the highest order and I will certainly be purchasing more to make a set of these spanners, most definitely worth the extra couple of quid to buy one of these over other makes in my opinion you certainly get what you pay for, and the nut setter in the open jaws is an absolute bonus when your fingers are cold and you have to try and grip the nut to get ... MoreI've purchased one of these the other day from eBay as my other 10mm spanner broke, to be honest they have always seemed a little overpriced for my liking, I got a very good deal on this one and so very pleased that I have taken the plunge, it is extremely comfortable in the hand and on the wrist, the feel and quality of the spanner is absolutely outstanding, feels and looks like that it will last a lifetime, quality of the highest order and I will certainly be purchasing more to make a set of these spanners, most definitely worth the extra couple of quid to buy one of these over other makes in my opinion you certainly get what you pay for, and the nut setter in the open jaws is an absolute bonus when your fingers are cold and you have to try and grip the nut to get it onto the thread, this spanner certainly removes the difficulty of positioning correctly and the risk of dropping it, cannot fault it in any way shape or manner everything is positive and the ratchet is outstandingly smooth! Cannot praise this highly enough ! Can't wait to get my hands on more of these certainly worth the money!
Bought due to a misplaced 10mm spanner for mitred worktops. The extra little steel section in the head really grabs onto the nut without slipping. Tiny increments on the ratchet ring too, so a nice little tool.
Dear but when one gets a good quality tool in one's hands it is easy to tell.The ratchet facility is something I had not encountered before in a spanner - brilliant... I will be getting a full set of these (when I win the lottery or maybe one for christmas for the next ten years!).
WERA items look very good, i fancied their spanners but thought I'd buy one to see what they're like. Glad i did as they are very bulky and very poor. Tried the 10mm open end on a 10mm brake nipple and it rounded it off. Slip a halfords 10mm spanner on and comes straight undone.
I lost a friends, and bought this to replace the lost one. Im not a fan of Wera spanners, as not used to using them, but they are well built and the nut hold ability is a good. The ratchet is smooth a strong. Only personal preference puts me off these spanners.
Good ratchet mechanism and the open end has a metal plate to help trap a bolt head. Built to last.
| Finish | Nickel Chrome Coating |
| Total Length (L) | 159mm |
| Material Specifications | Chrome Molybdenum Steel |
| Spanner Size (J) | 10mm |
| Open End Head Width | 22mm |
Wera Joker Ratcheting Combination Wrench
The Wera Joker 6003 ring spanner with its special mouth geometry – mouth side pivoted by 7.5° and the double hexagon profile – doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Joker 6003: For pivoting angles under 30° Thanks to the mouth side pivoted by 7.5°, double hexagon geometry and an adjusted application method (placement – screwdriving – turning – replacement – screwdriving – turning, etc), even screwdriving challenges allowing a pivoting angle of less than 30° can be solved. Double-hex geometry The double hexagon geometry on the mouth and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is angled at 15° to the tool axis to prevent injury.
The Wera Joker 6003 ring spanner with its special mouth geometry – mouth side pivoted by 7.5° and the double hexagon profile – doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Joker 6003: For pivoting angles under 30° Thanks to the mouth side pivoted by 7.5°, double hexagon geometry and an adjusted application method (placement – screwdriving – turning – replacement – screwdriving – turning, etc), even screwdriving challenges allowing a pivoting angle of less than 30° can be solved. Double-hex geometry The double hexagon geometry on the mouth and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is angled at 15° to the tool axis to prevent injury.
The Wera Joker 6003 ring spanner with its special mouth geometry – mouth side pivoted by 7.5° and the double hexagon profile – doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Joker 6003: For pivoting angles under 30° Thanks to the mouth side pivoted by 7.5°, double hexagon geometry and an adjusted application method (placement – screwdriving – turning – replacement – screwdriving – turning, etc), even screwdriving challenges allowing a pivoting angle of less than 30° can be solved. Double-hex geometry The double hexagon geometry on the mouth and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is angled at 15° to the tool axis to prevent injury.
The Wera Joker 6003 ring spanner with its special mouth geometry – mouth side pivoted by 7.5° and the double hexagon profile – doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Joker 6003: For pivoting angles under 30° Thanks to the mouth side pivoted by 7.5°, double hexagon geometry and an adjusted application method (placement – screwdriving – turning – replacement – screwdriving – turning, etc), even screwdriving challenges allowing a pivoting angle of less than 30° can be solved. Double-hex geometry The double hexagon geometry on the mouth and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is angled at 15° to the tool axis to prevent injury.
in 18 offers
The lowest price for Wera Joker Ratcheting Combination Wrench right now is $34.97 at tme.com, compared across 15 retailers.
The all-time low was $27.00 on 13 Mar 2026 — today's price is 30% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 13 May 2026.
