Low Profile Design A lot of the other brackets which can tilt forwards and also pivot/swivel left and right are quite bulky and can't fold up very compactly, making it hard to position your TV close to the wall. This bracket doesn't have that problem: it can fold back to within 54mm from the wall. Features: - 3 points of horizontal adjustment - Tilt: -2 ~ 12 degrees - Built in bubble level - Also includes a free reusable bubble level Horizontal Swivel/Pivot (Left/Right) This bracket allows you to turn your TV up to 90 degrees to the left or right. Please note that larger TVs may be limited to an angle smaller than 90 degrees. Wall Stud Spacing This TV bracket suits wall stud spacings of 400mm - 440mm. Because the Australian standard wall stud spacing is 450mm - 600mm, this bracket is best suited for mounting on brick or concrete walls, however the bracket can still be mounted to a single central wood stud as long as additional plaster anchor mounts are used. Will This Bracket Fit My TV / Monitor? The four threaded mounting holes on the back of your TV need to be: - No more than 600mm apart side to side. - No more than 400mm apart top to bottom. Maximum TV weight capacity is 30kg. Full VESA Patterns supported: 100x100, 200x100, 200x200, 300x300, 400x200, 400x400, 600x400 Screws/Bolts This bracket includes a variety of screws/bolts which are suitable for most installations. As with all wall brackets, if mounting on plasterboard walls it is essential that this bracket is fixed to timber studs.