Countersunk Eye Drive / Snake Eye Self Tapping Screws create (taps) it's own thread as the screw is being driven in. The head is flat with a smooth tapered underside designed to sit flush in fittings with tapered recesses. They are known as a tamper resistance security screw they are used to protect and prevent unauthorised removal. Sometimes referred to as snake eye two hole pig nose or spanner screws. Suitable for: Can you be used in stainless light gauge steel aluminium certain plastics and timber. To ensure the best result it is recommended to always drill a pilot hole Material / Coating: Stainless Steel A2-70 G304 is the most popular grade of stainless steel. It is aesthetically pleasing to the eye and very practical because of its excellent corrosion protection in most environments. Most products can be identified by the following markings: A2 A2-70 304 or G304. Stainless steels are largely non-magnetic but it is common for stainless steel fasteners to show a small degree of magnetism which is a result of work-hardening during the manufacturing process Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
Countersunk Eye Drive / Snake Eye Self Tapping Screws create (taps) it's own thread as the screw is being driven in. The head is flat with a smooth tapered underside designed to sit flush in fittings with tapered recesses. They are known as a tamper resistance security screw they are used to protect and prevent unauthorised removal. Sometimes referred to as snake eye two hole pig nose or spanner screws. Suitable for: Can you be used in stainless light gauge steel aluminium certain plastics and timber. To ensure the best result it is recommended to always drill a pilot hole Material / Coating: Stainless Steel A2-70 G304 is the most popular grade of stainless steel. It is aesthetically pleasing to the eye and very practical because of its excellent corrosion protection in most environments. Most products can be identified by the following markings: A2 A2-70 304 or G304. Stainless steels are largely non-magnetic but it is common for stainless steel fasteners to show a small degree of magnetism which is a result of work-hardening during the manufacturing process Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
in 1 offers
Countersunk Eye Drive / Snake Eye Self Tapping Screws create (taps) it's own thread as the screw is being driven in. The head is flat with a smooth tapered underside designed to sit flush in fittings with tapered recesses. They are known as a tamper resistance security screw they are used to protect and prevent unauthorised removal. Sometimes referred to as snake eye two hole pig nose or spanner screws. Suitable for: Can you be used in stainless light gauge steel aluminium certain plastics and timber. To ensure the best result it is recommended to always drill a pilot hole Material / Coating: Stainless Steel A2-70 G304 is the most popular grade of stainless steel. It is aesthetically pleasing to the eye and very practical because of its excellent corrosion protection in most environments. Most products can be identified by the following markings: A2 A2-70 304 or G304. Stainless steels are largely non-magnetic but it is common for stainless steel fasteners to show a small degree of magnetism which is a result of work-hardening during the manufacturing process Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
Countersunk Eye Drive / Snake Eye Self Tapping Screws create (taps) it's own thread as the screw is being driven in. The head is flat with a smooth tapered underside designed to sit flush in fittings with tapered recesses. They are known as a tamper resistance security screw they are used to protect and prevent unauthorised removal. Sometimes referred to as snake eye two hole pig nose or spanner screws. Suitable for: Can you be used in stainless light gauge steel aluminium certain plastics and timber. To ensure the best result it is recommended to always drill a pilot hole Material / Coating: Stainless Steel A2-70 G304 is the most popular grade of stainless steel. It is aesthetically pleasing to the eye and very practical because of its excellent corrosion protection in most environments. Most products can be identified by the following markings: A2 A2-70 304 or G304. Stainless steels are largely non-magnetic but it is common for stainless steel fasteners to show a small degree of magnetism which is a result of work-hardening during the manufacturing process Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
Size
Last updated at 16/11/2024 01:39:15
Go to store
See 3 more history offers
available 4 months ago
Low stock
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
available 5 months ago
Low stock
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
available 12 months ago
Low stock
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
| Size | 6g (3.50mm) |
| Drive Type | Eye Drive / Snake Eye |
| System of Measurement | Screw Gauge |
| Drive Size | #6 |
| Head Type | Countersunk Head |
Updated 1 day ago
See 3 more history offers
| Size | 6g (3.50mm) |
| Drive Type | Eye Drive / Snake Eye |
| System of Measurement | Screw Gauge |
| Drive Size | #6 |
| Head Type | Countersunk Head |
