Insta-Cure Plus is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE PLUS should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1 separations on one surface, then assemble the parts, letting the pressure spread the CA out.
Insta-Cure Plus is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE PLUS should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1 separations on one surface, then assemble the parts, letting the pressure spread the CA out.
in 5 offers
Insta-Cure Plus is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE PLUS should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1 separations on one surface, then assemble the parts, letting the pressure spread the CA out.
Insta-Cure Plus is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE PLUS should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1 separations on one surface, then assemble the parts, letting the pressure spread the CA out.
Last updated at 15/11/2024 23:14:02
+ $9.50 delivery
Go to store
+ $9.95 delivery
Go to store
+ $10.00 delivery
Go to store
+ $9.95 delivery
Go to store
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
available 2 days ago
Low stock
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
+ $8.00 delivery
Go to store
See 8 more history offers
available about 2 months ago
Low stock
available 2 months ago
Low stock
available 2 months ago
Low stock
available 3 months ago
Low stock
available 7 months ago
Low stock
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
available 10 months ago
Low stock
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
available 10 months ago
Low stock
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
available 11 months ago
Low stock
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
originally posted on ebay.com
originally posted on ebay.com
originally posted on ebay.com
Updated about 22 hours ago
See 8 more history offers
