Last updated at 14/05/2026 19:34:22
Camillus HT-8.5 Fixed Blade Knife
Delivery between Fri – Tue $37
Camillus Ht-8.5 Fixed Blade Knife Incl Ballistic Nylon Sheath
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Camillus HT-8.5 Fixed Blade Knife incl Ballistic Nylon Sheath (CA-19287)
Free delivery
Camillus HT-8.5 Fixed Blade Knife
Free delivery
Camillus HT-8.5 Fixed Blade Knife incl Ballistic Nylon Sheath (CA-19287)
Free delivery
Camillus HT-8.5 Fixed Blade Knife incl Ballistic Nylon Sheath (CA-19287)
Free delivery between 18–27 May
originally posted on woodcraft.com
The sheath strap is so short it will just barely go around the bare blade. Snapping to secure the blade with handles attached is simple impossible. Made in China. I would NOT recommend purchasing this kit.
originally posted on woodcraft.com
I have built a few knives from smaller blanks. This was my first without a guard. I didn't like the pins it came with so I bought some brass rods at the store. We had to drill out the handle for the 3/16 rods to go through the steel. We broke two drill bits but did get through it. I used oak for the handle and did some cutting and shaping before assembly. It was a bit different than the smaller knives I had done but with a bit more patience and measuring we came up with a pretty knife. My handle seems a bit bigger than the picture but fits my hand and does fit in the sheaf. It took about 2 1/2 hours.
originally posted on woodcraft.com
I bought this kit on sale and thought I had a pretty good deal. Not so. The screw rivets this knife comes with are too short to get a good handle on it. I tried to drill out the holes to use brass rods but have been unable to get even one hole drilled and there are 5 of them. I broke one drill bit that costs more than the kit and decided that was all. I worked on this knife off and on for 3 months, I decided to just shelve it and work on something else.
| Variant | |
| title | Default Title |
Camillus HT-8.5 Fixed Blade Knife
Delivery between Fri – Tue $37
Camillus Ht-8.5 Fixed Blade Knife Incl Ballistic Nylon Sheath
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Camillus HT-8.5 Fixed Blade Knife incl Ballistic Nylon Sheath (CA-19287)
Free delivery
Camillus HT-8.5 Fixed Blade Knife
Free delivery
Camillus HT-8.5 Fixed Blade Knife incl Ballistic Nylon Sheath (CA-19287)
Free delivery
The sheath strap is so short it will just barely go around the bare blade. Snapping to secure the blade with handles attached is simple impossible. Made in China. I would NOT recommend purchasing this kit.
I have built a few knives from smaller blanks. This was my first without a guard. I didn't like the pins it came with so I bought some brass rods at the store. We had to drill out the handle for the 3/16 rods to go through the steel. We broke two drill bits but did get through it. I used oak for the handle and did some cutting and shaping before assembly. It was a bit different than the smaller knives I had done but with a bit more patience and measuring we came up with a pretty knife. My handle seems a bit bigger than the picture but fits my hand and does fit in the sheaf. It took about 2 1/2 hours.
I bought this kit on sale and thought I had a pretty good deal. Not so. The screw rivets this knife comes with are too short to get a good handle on it. I tried to drill out the holes to use brass rods but have been unable to get even one hole drilled and there are 5 of them. I broke one drill bit that costs more than the kit and decided that was all. I worked on this knife off and on for 3 months, I decided to just shelve it and work on something else.
I've had this kit laying around for a year and decided to build it as a Christmas present. I've always made wood handles but since this getting used outdoors I made it out of G10 like plastic. This is much harder to work with than wood but luckily I have a Grizzly combo spindle / disc sander and this made life a lot easier. The problem with this kit became evident when I tried to mount my new handles and would that the studs are way to short. The instructions call for the handles to be 8 mm thick where the studs go through but the threaded stud is 13 mm and the screw that goes into it is 4 mm for a maximum of 17 mm. The handles alone are 16 mm not including the 5 mm blade. I guess my options are drilled out the blade and handles and gluing in 3/8 brass rod like ... MoreI've had this kit laying around for a year and decided to build it as a Christmas present. I've always made wood handles but since this getting used outdoors I made it out of G10 like plastic. This is much harder to work with than wood but luckily I have a Grizzly combo spindle / disc sander and this made life a lot easier. The problem with this kit became evident when I tried to mount my new handles and would that the studs are way to short. The instructions call for the handles to be 8 mm thick where the studs go through but the threaded stud is 13 mm and the screw that goes into it is 4 mm for a maximum of 17 mm. The handles alone are 16 mm not including the 5 mm blade. I guess my options are drilled out the blade and handles and gluing in 3/8 brass rod like other knives I've done, find a longer screw or trying to countersink the holes in the handle to make the existing screws work. Poor design!
Very smooth and strong blade. Handle contours to your hand nicely and grips well even in wet conditions. Very fair price for a quality knife.
| Variant | |
| title | Default Title |
The Camillus HT-8.5 Fixed Blade Knife is a full tang knife with a 3.25" blade made of Japanese AUS-8 Steel. AUS-8 steel offers an exceptional balance between toughness, edge sharpness, and corrosion resistance. Additionally, AUS-8 ranks among the hardest, toughest, and most rust-resistant knife steels and it's a trusted favourite that enthusiasts prefer time and time again. The extremely comfortable handle of the HT-8.5 is also made of ergonomic, glass filled nylon and thermoplastic rubber. The combination of these two materials allows the handle to be rugged and lightweight, while also providing an excellent grip in all conditions to compliment the HT-8.5's sturdy blade.
The Camillus HT-8.5 Fixed Blade Knife is a full tang knife with a 3.25" blade made of Japanese AUS-8 Steel. AUS-8 steel offers an exceptional balance between toughness, edge sharpness, and corrosion resistance. Additionally, AUS-8 ranks among the hardest, toughest, and most rust-resistant knife steels and it's a trusted favourite that enthusiasts prefer time and time again. The extremely comfortable handle of the HT-8.5 is also made of ergonomic, glass filled nylon and thermoplastic rubber. The combination of these two materials allows the handle to be rugged and lightweight, while also providing an excellent grip in all conditions to compliment the HT-8.5's sturdy blade.
Camillus HT-8.5 Fixed Blade Knife
The Camillus HT-8.5 Fixed Blade Knife is a full tang knife with a 3.25" blade made of Japanese AUS-8 Steel. AUS-8 steel offers an exceptional balance between toughness, edge sharpness, and corrosion resistance. Additionally, AUS-8 ranks among the hardest, toughest, and most rust-resistant knife steels and it's a trusted favourite that enthusiasts prefer time and time again. The extremely comfortable handle of the HT-8.5 is also made of ergonomic, glass filled nylon and thermoplastic rubber. The combination of these two materials allows the handle to be rugged and lightweight, while also providing an excellent grip in all conditions to compliment the HT-8.5's sturdy blade.
The Camillus HT-8.5 Fixed Blade Knife is a full tang knife with a 3.25" blade made of Japanese AUS-8 Steel. AUS-8 steel offers an exceptional balance between toughness, edge sharpness, and corrosion resistance. Additionally, AUS-8 ranks among the hardest, toughest, and most rust-resistant knife steels and it's a trusted favourite that enthusiasts prefer time and time again. The extremely comfortable handle of the HT-8.5 is also made of ergonomic, glass filled nylon and thermoplastic rubber. The combination of these two materials allows the handle to be rugged and lightweight, while also providing an excellent grip in all conditions to compliment the HT-8.5's sturdy blade.
in 6 offers
The lowest price for Camillus HT-8.5 Fixed Blade Knife right now is $121.00 at Ramped up 4x4, compared across 5 retailers.
The all-time low was $95.99 on 31 July 2025 — today's price is 26% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 14 May 2026.
