The Deda Zero 100 Stem is a prove race stem that leans toward the practical. They start with 2014 aluminum alloy, 3D forge it, remove excess material, and add on a two-piece faceplate. As they're thinking practical, they go with chromoly bolts rather than titanium. There are two versions of the stem. One with an 82-degree angle, and the Team version, with a 70-degree anglethis is slightly below parallel with the ground on most bikes. There are two finish choices, Black on Black (BOB), and Black anodized for the standard and Black anodized only for the Team. The handlebar clamp is Deda's standard 31.7mm. The steerer clamp is 1 1/8". The steerer clamp height is 40mm. Sizes run from 80-140mm in 10mm increments for the standard, and 90-140 for the Team. Weight for the stem is 126g in the 110mm length.
The Deda Zero 100 Stem is a prove race stem that leans toward the practical. They start with 2014 aluminum alloy, 3D forge it, remove excess material, and add on a two-piece faceplate. As they're thinking practical, they go with chromoly bolts rather than titanium. There are two versions of the stem. One with an 82-degree angle, and the Team version, with a 70-degree anglethis is slightly below parallel with the ground on most bikes. There are two finish choices, Black on Black (BOB), and Black anodized for the standard and Black anodized only for the Team. The handlebar clamp is Deda's standard 31.7mm. The steerer clamp is 1 1/8". The steerer clamp height is 40mm. Sizes run from 80-140mm in 10mm increments for the standard, and 90-140 for the Team. Weight for the stem is 126g in the 110mm length.
in 2 offers
The Deda Zero 100 Stem is a prove race stem that leans toward the practical. They start with 2014 aluminum alloy, 3D forge it, remove excess material, and add on a two-piece faceplate. As they're thinking practical, they go with chromoly bolts rather than titanium. There are two versions of the stem. One with an 82-degree angle, and the Team version, with a 70-degree anglethis is slightly below parallel with the ground on most bikes. There are two finish choices, Black on Black (BOB), and Black anodized for the standard and Black anodized only for the Team. The handlebar clamp is Deda's standard 31.7mm. The steerer clamp is 1 1/8". The steerer clamp height is 40mm. Sizes run from 80-140mm in 10mm increments for the standard, and 90-140 for the Team. Weight for the stem is 126g in the 110mm length.
The Deda Zero 100 Stem is a prove race stem that leans toward the practical. They start with 2014 aluminum alloy, 3D forge it, remove excess material, and add on a two-piece faceplate. As they're thinking practical, they go with chromoly bolts rather than titanium. There are two versions of the stem. One with an 82-degree angle, and the Team version, with a 70-degree anglethis is slightly below parallel with the ground on most bikes. There are two finish choices, Black on Black (BOB), and Black anodized for the standard and Black anodized only for the Team. The handlebar clamp is Deda's standard 31.7mm. The steerer clamp is 1 1/8". The steerer clamp height is 40mm. Sizes run from 80-140mm in 10mm increments for the standard, and 90-140 for the Team. Weight for the stem is 126g in the 110mm length.
Size
Last updated at 26/06/2025 10:20:20
See 14 more history offers
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
| Screws Material | Chromoly (CrMo) |
| Angle | -82° / + 8° |
| Handlebar Clamp Diameter | 31.7mm |
| Fork Steerer Clamp Diameter | 1 1/8" (28.6mm) |
| Stack Height | 40mm |
See 14 more history offers
| Screws Material | Chromoly (CrMo) |
| Angle | -82° / + 8° |
| Handlebar Clamp Diameter | 31.7mm |
| Fork Steerer Clamp Diameter | 1 1/8" (28.6mm) |
| Stack Height | 40mm |
