Enerdrive 40A AC To DC Battery Charger With Installation Kit
Enerdrive 40A AC to DC Battery Charger with Installation Kit The Enerdrive ePOWER 40A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently. As dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. The Enerdrive ePOWER 40A Battery Charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). Features: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks Isolated charging design where battery bank one is separate from battery bank two and three Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3 User adjustable current output Smart Charging Operates on both 110V / 60Hz and 240V / 50Hz LED Display Silent Mode Battery temperature sensor included with 3 meter cable. (Battery Charger) AC Input Connection IEC with Supplied 1.2M Power Lead (Battery Charger) DC Output Connection Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread (Battery Charger) DC Output Ground Single Heavy Duty Common Ground Stud (Battery Charger) Storage Range (temp) -40° to 70° C (Battery Charger) Operating Range (temp) -20° to 60° C (Battery Charger) Humidity 5-95%, relative humidity non-condensing (Battery Charger) Ingress Protection IP32 (Basic drip proof in vertical orientation) (Battery Charger) Weight 2.6 kg Regulatory Compliance Complies with AS/NZS 60335.2.29 Including Australian deviations. (Battery Charger) 50 Amp Manual Reset Circuit Breaker The 50 Amp Manual Reset Circuit Breaker is typically used in auxiliary and accessory circuits in truck, bus RV's and marine applications. Specifications: Rated Current 50Amp Dimensions 86 x 48.4 x 44.2mm Interrupt Capacity 5KA , 16Vdc | 3KA , 32Vdc | 2KA , 72 Dvc Voltage Up to 48Vdc Calibration , 25°C 100% Hold 135% Trip (percentage of rating) Endurance 400% A 14Vdc, 5000 cycles
Enerdrive 40A AC to DC Battery Charger with Installation Kit The Enerdrive ePOWER 40A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently. As dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. The Enerdrive ePOWER 40A Battery Charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). Features: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks Isolated charging design where battery bank one is separate from battery bank two and three Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3 User adjustable current output Smart Charging Operates on both 110V / 60Hz and 240V / 50Hz LED Display Silent Mode Battery temperature sensor included with 3 meter cable. (Battery Charger) AC Input Connection IEC with Supplied 1.2M Power Lead (Battery Charger) DC Output Connection Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread (Battery Charger) DC Output Ground Single Heavy Duty Common Ground Stud (Battery Charger) Storage Range (temp) -40° to 70° C (Battery Charger) Operating Range (temp) -20° to 60° C (Battery Charger) Humidity 5-95%, relative humidity non-condensing (Battery Charger) Ingress Protection IP32 (Basic drip proof in vertical orientation) (Battery Charger) Weight 2.6 kg Regulatory Compliance Complies with AS/NZS 60335.2.29 Including Australian deviations. (Battery Charger) 50 Amp Manual Reset Circuit Breaker The 50 Amp Manual Reset Circuit Breaker is typically used in auxiliary and accessory circuits in truck, bus RV's and marine applications. Specifications: Rated Current 50Amp Dimensions 86 x 48.4 x 44.2mm Interrupt Capacity 5KA , 16Vdc | 3KA , 32Vdc | 2KA , 72 Dvc Voltage Up to 48Vdc Calibration , 25°C 100% Hold 135% Trip (percentage of rating) Endurance 400% A 14Vdc, 5000 cycles
$715.00 - $715.00
in 3 offers
Enerdrive 40A AC To DC Battery Charger With Installation Kit
$715.00
Enerdrive 40A AC to DC Battery Charger with Installation Kit The Enerdrive ePOWER 40A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently. As dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. The Enerdrive ePOWER 40A Battery Charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). Features: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks Isolated charging design where battery bank one is separate from battery bank two and three Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3 User adjustable current output Smart Charging Operates on both 110V / 60Hz and 240V / 50Hz LED Display Silent Mode Battery temperature sensor included with 3 meter cable. (Battery Charger) AC Input Connection IEC with Supplied 1.2M Power Lead (Battery Charger) DC Output Connection Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread (Battery Charger) DC Output Ground Single Heavy Duty Common Ground Stud (Battery Charger) Storage Range (temp) -40° to 70° C (Battery Charger) Operating Range (temp) -20° to 60° C (Battery Charger) Humidity 5-95%, relative humidity non-condensing (Battery Charger) Ingress Protection IP32 (Basic drip proof in vertical orientation) (Battery Charger) Weight 2.6 kg Regulatory Compliance Complies with AS/NZS 60335.2.29 Including Australian deviations. (Battery Charger) 50 Amp Manual Reset Circuit Breaker The 50 Amp Manual Reset Circuit Breaker is typically used in auxiliary and accessory circuits in truck, bus RV's and marine applications. Specifications: Rated Current 50Amp Dimensions 86 x 48.4 x 44.2mm Interrupt Capacity 5KA , 16Vdc | 3KA , 32Vdc | 2KA , 72 Dvc Voltage Up to 48Vdc Calibration , 25°C 100% Hold 135% Trip (percentage of rating) Endurance 400% A 14Vdc, 5000 cycles
Enerdrive 40A AC to DC Battery Charger with Installation Kit The Enerdrive ePOWER 40A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently. As dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. The Enerdrive ePOWER 40A Battery Charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). Features: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks Isolated charging design where battery bank one is separate from battery bank two and three Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3 User adjustable current output Smart Charging Operates on both 110V / 60Hz and 240V / 50Hz LED Display Silent Mode Battery temperature sensor included with 3 meter cable. (Battery Charger) AC Input Connection IEC with Supplied 1.2M Power Lead (Battery Charger) DC Output Connection Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread (Battery Charger) DC Output Ground Single Heavy Duty Common Ground Stud (Battery Charger) Storage Range (temp) -40° to 70° C (Battery Charger) Operating Range (temp) -20° to 60° C (Battery Charger) Humidity 5-95%, relative humidity non-condensing (Battery Charger) Ingress Protection IP32 (Basic drip proof in vertical orientation) (Battery Charger) Weight 2.6 kg Regulatory Compliance Complies with AS/NZS 60335.2.29 Including Australian deviations. (Battery Charger) 50 Amp Manual Reset Circuit Breaker The 50 Amp Manual Reset Circuit Breaker is typically used in auxiliary and accessory circuits in truck, bus RV's and marine applications. Specifications: Rated Current 50Amp Dimensions 86 x 48.4 x 44.2mm Interrupt Capacity 5KA , 16Vdc | 3KA , 32Vdc | 2KA , 72 Dvc Voltage Up to 48Vdc Calibration , 25°C 100% Hold 135% Trip (percentage of rating) Endurance 400% A 14Vdc, 5000 cycles
