Enerdrive ePOWER B-TEC 24V 100Ah Lithium Battery 485 x 170 x 245 mm The ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity. Specifications: Amp Hours (Ah) 100.0 Battery Voltage 24V Nominal Voltage 25.6V Nominal Capacity 100Ah Cycle Life (DOD - 80% under controlled conditions) ≥ 2000 Cycles Battery Charge Temperature 0 ̴ 45°C Normal Charge Voltage CV/CC 28.80 - 29.20V Standby (Float) Voltage 27.00 - 27.60V Maximum Charge Current 50A , 25°C for 30mins Recommended Charge for Maximum Life ≤ 33A Battery Discharge Temperature -20-60°C Battery Output Voltage Range 22.0 - 29.20V Maximum Discharge Current 100A , 25°C ± 5°C for 30mins Pulse Discharge Current 450A for 1.0s Discharge Cut-off Voltage ≤ 22.40V Smart Phone Monitoring System The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android or Apple app to your smartphone or tablet device, you can monitor the following information; Battery Capacity Battery Voltage Battery Current (Amps) Battery State of Charge (SOC) Battery State of Health (SOH) Battery Status Individual Cell Voltage Battery Temperature Battery Cycles Battery Alarms Battery Event Information Battery Management System The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery. Size & Weight Savings Lithium v AGM Capacities; 100Ah Lithium = 160Ah AGM (Based on standard depth of discharge for both Lithium (80%) and AGM (50%). The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative. The ePOWER B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity. Please Note: This ePOWER B-TEC lithium battery is capable to be paralleled to a second ePOWER B-TEC lithium battery. For maximum performance and lifespan of your lithium battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.
Enerdrive ePOWER B-TEC 24V 100Ah Lithium Battery 485 x 170 x 245 mm The ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity. Specifications: Amp Hours (Ah) 100.0 Battery Voltage 24V Nominal Voltage 25.6V Nominal Capacity 100Ah Cycle Life (DOD - 80% under controlled conditions) ≥ 2000 Cycles Battery Charge Temperature 0 ̴ 45°C Normal Charge Voltage CV/CC 28.80 - 29.20V Standby (Float) Voltage 27.00 - 27.60V Maximum Charge Current 50A , 25°C for 30mins Recommended Charge for Maximum Life ≤ 33A Battery Discharge Temperature -20-60°C Battery Output Voltage Range 22.0 - 29.20V Maximum Discharge Current 100A , 25°C ± 5°C for 30mins Pulse Discharge Current 450A for 1.0s Discharge Cut-off Voltage ≤ 22.40V Smart Phone Monitoring System The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android or Apple app to your smartphone or tablet device, you can monitor the following information; Battery Capacity Battery Voltage Battery Current (Amps) Battery State of Charge (SOC) Battery State of Health (SOH) Battery Status Individual Cell Voltage Battery Temperature Battery Cycles Battery Alarms Battery Event Information Battery Management System The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery. Size & Weight Savings Lithium v AGM Capacities; 100Ah Lithium = 160Ah AGM (Based on standard depth of discharge for both Lithium (80%) and AGM (50%). The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative. The ePOWER B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity. Please Note: This ePOWER B-TEC lithium battery is capable to be paralleled to a second ePOWER B-TEC lithium battery. For maximum performance and lifespan of your lithium battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.
in 7 offers
Enerdrive ePOWER B-TEC 24V 100Ah Lithium Battery 485 x 170 x 245 mm The ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity. Specifications: Amp Hours (Ah) 100.0 Battery Voltage 24V Nominal Voltage 25.6V Nominal Capacity 100Ah Cycle Life (DOD - 80% under controlled conditions) ≥ 2000 Cycles Battery Charge Temperature 0 ̴ 45°C Normal Charge Voltage CV/CC 28.80 - 29.20V Standby (Float) Voltage 27.00 - 27.60V Maximum Charge Current 50A , 25°C for 30mins Recommended Charge for Maximum Life ≤ 33A Battery Discharge Temperature -20-60°C Battery Output Voltage Range 22.0 - 29.20V Maximum Discharge Current 100A , 25°C ± 5°C for 30mins Pulse Discharge Current 450A for 1.0s Discharge Cut-off Voltage ≤ 22.40V Smart Phone Monitoring System The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android or Apple app to your smartphone or tablet device, you can monitor the following information; Battery Capacity Battery Voltage Battery Current (Amps) Battery State of Charge (SOC) Battery State of Health (SOH) Battery Status Individual Cell Voltage Battery Temperature Battery Cycles Battery Alarms Battery Event Information Battery Management System The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery. Size & Weight Savings Lithium v AGM Capacities; 100Ah Lithium = 160Ah AGM (Based on standard depth of discharge for both Lithium (80%) and AGM (50%). The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative. The ePOWER B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity. Please Note: This ePOWER B-TEC lithium battery is capable to be paralleled to a second ePOWER B-TEC lithium battery. For maximum performance and lifespan of your lithium battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.
Enerdrive ePOWER B-TEC 24V 100Ah Lithium Battery 485 x 170 x 245 mm The ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity. Specifications: Amp Hours (Ah) 100.0 Battery Voltage 24V Nominal Voltage 25.6V Nominal Capacity 100Ah Cycle Life (DOD - 80% under controlled conditions) ≥ 2000 Cycles Battery Charge Temperature 0 ̴ 45°C Normal Charge Voltage CV/CC 28.80 - 29.20V Standby (Float) Voltage 27.00 - 27.60V Maximum Charge Current 50A , 25°C for 30mins Recommended Charge for Maximum Life ≤ 33A Battery Discharge Temperature -20-60°C Battery Output Voltage Range 22.0 - 29.20V Maximum Discharge Current 100A , 25°C ± 5°C for 30mins Pulse Discharge Current 450A for 1.0s Discharge Cut-off Voltage ≤ 22.40V Smart Phone Monitoring System The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android or Apple app to your smartphone or tablet device, you can monitor the following information; Battery Capacity Battery Voltage Battery Current (Amps) Battery State of Charge (SOC) Battery State of Health (SOH) Battery Status Individual Cell Voltage Battery Temperature Battery Cycles Battery Alarms Battery Event Information Battery Management System The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery. Size & Weight Savings Lithium v AGM Capacities; 100Ah Lithium = 160Ah AGM (Based on standard depth of discharge for both Lithium (80%) and AGM (50%). The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative. The ePOWER B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity. Please Note: This ePOWER B-TEC lithium battery is capable to be paralleled to a second ePOWER B-TEC lithium battery. For maximum performance and lifespan of your lithium battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.
Last updated at 01/11/2024 08:09:14
Go to store
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Go to store
Go to store
Go to store
Go to store
Go to store
See 7 more history offers
available about 2 months ago
Low stock
available 4 months ago
Low stock
available 7 months ago
Low stock
available 12 months ago
Low stock
available about 1 year ago
Low stock
available over 1 year ago
Low stock
Enerdrive ePOWER B-TEC 300Ah Lithium Battery (EPL-300BT-12V-G2)
$2,899.00 - $3,690.00
Compare 4 offers
Enerdrive EPL-100BT-12V-SLIM B-TEC 100Ah 12V Lifepo4 Slim Case Battery
$1,299.00 - $1,708.73
Compare 16 offers
Enerdrive B-TEC 12V 200Ah G2 Lithium Battery
$2,020.00 - $2,825.00
Compare 9 offers
Amp Hours (Ah) | 100.0 |
Battery Voltage | 24V |
Nominal Voltage | 25.6V |
Nominal Capacity | 100Ah |
Cycle Life (DOD - 80% under controlled conditions) | ≥ 2000 Cycles |
Updated about 8 hours ago
See 7 more history offers
Amp Hours (Ah) | 100.0 |
Battery Voltage | 24V |
Nominal Voltage | 25.6V |
Nominal Capacity | 100Ah |
Cycle Life (DOD - 80% under controlled conditions) | ≥ 2000 Cycles |