eSUN Orange 500g PLA Resin for Photon Resin 3D Printers eSun-PLA is a Bio-Based PLA Resin which is a environmental friendly resin made for LCD/LED light source printers. Features: Environmental friendly. Low smell. High precision. High hardness and good wear resistance. Good moisture-resistance. Wavelength (nm) : 395-405 Density (g/m3) : 1.07-1.13 Viscosity (25Deg, MPa.s) : 200-300 Hardness (Shore D) : 75-80 Tensile Strength (Mpa) : 35-50 Elongation at Break (%) : 20-50 Flexural Strength (Mpa) : 600-800 Filament Type : Resin Length : 95mm Width : 125mm Height : 220mm Weight : 619geSUN Orange 500g PLA Resin for Photon Resin 3D Printers eSun-PLA is a Bio-Based PLA Resin which is a environmental friendly resin made for LCD/LED light source printers. Features: Environmental friendly. Low smell. High precision. High hardness and good wear resistance. Good moisture-resistance. Wavelength (nm) : 395-405 Density (g/m3) : 1.07-1.13 Viscosity (25Deg, MPa.s) : 200-300 Hardness (Shore D) : 75-80 Tensile Strength (Mpa) : 35-50 Elongation at Break (%) : 20-50 Flexural Strength (Mpa) : 600-800 Filament Type : Resin Length : 95mm Width : 125mm Height : 220mm Weight : 619g |
eSUN Orange 500g PLA Resin for Photon Resin 3D Printers eSun-PLA is a Bio-Based PLA Resin which is a environmental friendly resin made for LCD/LED light source printers. Features: Environmental friendly. Low smell. High precision. High hardness and good wear resistance. Good moisture-resistance. Wavelength (nm) : 395-405 Density (g/m3) : 1.07-1.13 Viscosity (25Deg, MPa.s) : 200-300 Hardness (Shore D) : 75-80 Tensile Strength (Mpa) : 35-50 Elongation at Break (%) : 20-50 Flexural Strength (Mpa) : 600-800 Filament Type : Resin Length : 95mm Width : 125mm Height : 220mm Weight : 619geSUN Orange 500g PLA Resin for Photon Resin 3D Printers eSun-PLA is a Bio-Based PLA Resin which is a environmental friendly resin made for LCD/LED light source printers. Features: Environmental friendly. Low smell. High precision. High hardness and good wear resistance. Good moisture-resistance. Wavelength (nm) : 395-405 Density (g/m3) : 1.07-1.13 Viscosity (25Deg, MPa.s) : 200-300 Hardness (Shore D) : 75-80 Tensile Strength (Mpa) : 35-50 Elongation at Break (%) : 20-50 Flexural Strength (Mpa) : 600-800 Filament Type : Resin Length : 95mm Width : 125mm Height : 220mm Weight : 619g |
in 3 offers
eSUN Orange 500g PLA Resin for Photon Resin 3D Printers eSun-PLA is a Bio-Based PLA Resin which is a environmental friendly resin made for LCD/LED light source printers. Features: Environmental friendly. Low smell. High precision. High hardness and good wear resistance. Good moisture-resistance. Wavelength (nm) : 395-405 Density (g/m3) : 1.07-1.13 Viscosity (25Deg, MPa.s) : 200-300 Hardness (Shore D) : 75-80 Tensile Strength (Mpa) : 35-50 Elongation at Break (%) : 20-50 Flexural Strength (Mpa) : 600-800 Filament Type : Resin Length : 95mm Width : 125mm Height : 220mm Weight : 619geSUN Orange 500g PLA Resin for Photon Resin 3D Printers eSun-PLA is a Bio-Based PLA Resin which is a environmental friendly resin made for LCD/LED light source printers. Features: Environmental friendly. Low smell. High precision. High hardness and good wear resistance. Good moisture-resistance. Wavelength (nm) : 395-405 Density (g/m3) : 1.07-1.13 Viscosity (25Deg, MPa.s) : 200-300 Hardness (Shore D) : 75-80 Tensile Strength (Mpa) : 35-50 Elongation at Break (%) : 20-50 Flexural Strength (Mpa) : 600-800 Filament Type : Resin Length : 95mm Width : 125mm Height : 220mm Weight : 619g |
eSUN Orange 500g PLA Resin for Photon Resin 3D Printers eSun-PLA is a Bio-Based PLA Resin which is a environmental friendly resin made for LCD/LED light source printers. Features: Environmental friendly. Low smell. High precision. High hardness and good wear resistance. Good moisture-resistance. Wavelength (nm) : 395-405 Density (g/m3) : 1.07-1.13 Viscosity (25Deg, MPa.s) : 200-300 Hardness (Shore D) : 75-80 Tensile Strength (Mpa) : 35-50 Elongation at Break (%) : 20-50 Flexural Strength (Mpa) : 600-800 Filament Type : Resin Length : 95mm Width : 125mm Height : 220mm Weight : 619geSUN Orange 500g PLA Resin for Photon Resin 3D Printers eSun-PLA is a Bio-Based PLA Resin which is a environmental friendly resin made for LCD/LED light source printers. Features: Environmental friendly. Low smell. High precision. High hardness and good wear resistance. Good moisture-resistance. Wavelength (nm) : 395-405 Density (g/m3) : 1.07-1.13 Viscosity (25Deg, MPa.s) : 200-300 Hardness (Shore D) : 75-80 Tensile Strength (Mpa) : 35-50 Elongation at Break (%) : 20-50 Flexural Strength (Mpa) : 600-800 Filament Type : Resin Length : 95mm Width : 125mm Height : 220mm Weight : 619g |
Last updated at 17/11/2024 21:11:21
Go to store
Go to store
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
See 7 more history offers
available 13 days ago
Low stock
available 20 days ago
Low stock
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
available 26 days ago
Low stock
available about 2 months ago
Low stock
available 2 months ago
Low stock
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
available 3 months ago
Low stock
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
available 3 months ago
Low stock
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
| wavelength (nm) | 395-405 |
| Density (g/m3) | 1.07-1.13 |
| Viscosity (25°, MPa.s) | 200-300 |
| Hardness (Shore D) | 75-80 |
| Tensile Strength (Mpa) | 35-50 |
Updated about 22 hours ago
See 7 more history offers
| wavelength (nm) | 395-405 |
| Density (g/m3) | 1.07-1.13 |
| Viscosity (25°, MPa.s) | 200-300 |
| Hardness (Shore D) | 75-80 |
| Tensile Strength (Mpa) | 35-50 |
