A protective, penetrating oil, with UV, water, fungi and mould resistant properties, Feast Watson Outdoor Furniture Oil is specifically formulated to preserve and maintain the natural look of timber. Outdoor Furniture Oil is available in five semi-transparent timber colours and a clear finish. It is suitable for use on all outdoor timber furniture and timber BBQ trolleys. PREPARATION How to prepare my furniture for Feast Watson Outdoor Furniture Oil: Prep in one easy step! Using the Feast Watson Woodclean, ensure your furniture is clean from any dirt, oil, wax or grease. Allow to dry before applying. APPLICATION How to apply and oil outdoor wood furniture using Feast Watson Outdoor Furniture Oil: Let's bring that furniture back to life! Make sure your Outdoor Furniture Oil is thoroughly stirred both before and during application to ensure a uniform colour. Note: If you require more than one can, mix them together in one large container before starting work. Using a quality brush, apply your first coat. Work in sections, in the direction of the grain. And remember, ensure your edges and end grain are fully coated! - If you are using a spray, remember to back brush to ensure even penetration. Go make yourself a coffee and let the oil penetrate. Once you have had your coffee, remove any excess oil with a brush or clean cloth. Leave to dry for 12 hours before the second coat. TIP: When applying oil to outdoor furniture, it is always best to work on the inside of the leg first and lap your way around, then work up onto the seat. Finish off with the back of the chair or bench. MAINTENANCE How to maintain my furniture after using Feast Watson Outdoor Furniture Oil? As you would any outdoor furniture, keep an eye out for any signs of colour loss, dryness and weathering. If required, use Woodclean to clean the surface, and recoat with one coat of Feast Watson Outdoor Furniture Oil. Good as new!