Festool FS 90 Degree Guide Rail Square - 205229

Another simple cost effective product from ToolFix3D. Until you've used these support clips you really don't appreciate just how indispensable they are. An excellent product at a reasonable price delivered promptly (despite Royal Mail) ..... enough said.

Brilliant piece of kit. Turns your track into a big square. Great for ripping down 8x4 boards.

A fantastic product again from

A fantastic product again from festool. A real quality piece of equipment. Easy to use and gives great results.

Festool Rail Square

Makes cutting at 90 degrees from a known square edge quick easy and accurate. Didn't try the five cut method to ascertain how accurate, but certainly, cut looked at 90 degrees and was square as near as I could tell. Very pleased with results and would recommend.

Festool rail square. Accurate and quick to use.

Bought this when it was about £80 cheaper than the similar TSO item. Clips and locks onto the guide rail quickly and easily. No tools required. Tested it after the first few cuts and all the cuts were spot on. When using, I keep it pushed to the panel edge and don’t bother with rail clamps. When cutting to a line push the guide to the edge and with the rear of the rail slightly raised nudge to the line, then let the rail lay flat on the wood. I find this setup quicker than using guide dogs etc as when you make the cut you lift the rail away and your work area is clear. Happy with purchase and works as expected.

Gives a perfect 90 cut.

I learned long ago - get the best kit for the job. And this is the just that. I have used this to cut 90 degree shoulders on wide boards in preparation for tenoning. After final assembly there was no discernible error out of square over the 3’ length of the legs. If you want accurate 90 with your track saw this delivers it every time - better than my table saw.

Great aid

This guide is quick to attach and very accurate, speeds up the job of breaking down sheet material and getting perfect results every time. Invaluable. Also it will fit into the front pouch of the guide rail bag.

Great item - doesn't come with clamp

When I bought this right angle track saw jig I compared different brands and decided the fact this came with a fast action clamp made up for it being more expensive. However, it doesn't come with a clamp, despite the clamp being listed in the description. Ignoring the cost and poor description I would have rated 5*, as it massively speeds up placement of track where an accurateright angle cut is required.

Thoroughly recommended. I reviewed it on my Your Tube Channel AMBuilds.

It's such an easy accessory to bring into your workflow. Accurate and quick and I would replace mine immediately if lost. I had one of the very earliest examples in the UK and reviewed it as my first carpentry you tube video.

weighty

great tool, should have got one years ago. A little weighty though, might drill a couple of big holes in it to lighten it up a bit.