100% natural Food safe Zero VOC No additives No petro-chemicals Product Pure Hemp Oil Size 250ml, 1L Description Pure hemp seed oil (cold pressed from cannabis sativa spp.) Used For Timber finishes, chalk paint seal, skin care products Surface Preparation Before you begin, make sure your surface is clean and dust free. If you’re applying hemp oil over a piece painted with chalk paint, ensure you give the paint about 12 hours to dry before you apply the oil. How to Apply To Raw Timber Hemp oil is a deep green colour but as a natural oil, will vary somewhat between batches. When first applied, it will deepen the colour of your finish (as if it were wet) but it will slowly lighten over time as the oil soaks in and cures. Use a lint-free rag, or a paintbrush to apply hemp oil; sponges are also effective. Use sparingly - wipe one thin coat over the surface and let it soak into the finish for 12 hours. Apply up to three coats for areas of higher wear (for example, timber chair seats, handrails, table tops etc.) Can be buffed to impart a gentle lustre. Dry Time 12 hours but allow up to 30 days for full curing. Gentle use is fine up until that point. Maintenance For general maintenance and wear, simply re-apply as the surface becomes faded or dry. Normally only required every 2 years. Clean Up Warm, soapy water or a solvent such as Gilly’s Citrus Thin. Safety Hang out rags to dry, or soak in water. Don’t leave scrunched up. Contact Gilly’s for SDS Ingredients Hemp seed oil 100%