Efficient EuroLED LED downlights provide a viable alternative to 20W incandescent lamps and offer substantial energy saving on board. Designed and manufactured in New Zealand, EuroLED 115mm LED downlights provide wide spread illumination with class leading colour rendering and interior enhancing colour temperatures in white (5000K) or warm white (3000K). Power consumption is less than 4.5W per lamp (<0.37A@12V / <0.18A@24V) offering substantial power saving and heat reduction onboard compared to incandescent lighting. EuroLED 115mm lamps require no remote drivers or control wires, simply connect the positive and negative cables to 12V or 24V DC systems. Each lamp operates on an input voltage between 10-33V DC and can also be fully dimmed and controlled via PWM based products such as the Hella marine 2 Group Light Dimmer (5XA 998 572-001). Internal Multivolt electronics also provide robust reverse polarity, spoke and over-voltage protection for ongoing reliability. EuroLED lamps can be installed almost anywhere onboard, interior or exterior, wet or dry. The low heat signature will not cause damage to surrounding materials. Supplied with a spacer ring, the EuroLED 115mm can be surface or recessed mounted making this light compatible with a broad range of applications and installations. Switched versions are available pre-wired with an ON/OFF rocker switch integrated into the side of the housing. Hella marine LED downlights represent the very latest in class leading energy efficiency and maintenance free fit and forget technology. Lens Material UV resistant enhanced impact acrylic Rim Material UV resistant plastic. 316 stainless steel. Colour Temperature 5000K (White) Dimming PWM. eg Via to Hella marine 5XA 998 572-001 Cable Pre-wired with 500mm twin core marine cable Operating Voltage 10-33V DC Power Consumption < 4.5W ( <0.37A @ 12V / <0.18A @ 24V ) Degree of Protection IP 67 - Completely sealed Weight 170g (including cable) Installation Recess into 90mm cutout. Surface mount via spacer Approvals CE Manufacturing Location New Zealand
Efficient EuroLED LED downlights provide a viable alternative to 20W incandescent lamps and offer substantial energy saving on board. Designed and manufactured in New Zealand, EuroLED 115mm LED downlights provide wide spread illumination with class leading colour rendering and interior enhancing colour temperatures in white (5000K) or warm white (3000K). Power consumption is less than 4.5W per lamp (<0.37A@12V / <0.18A@24V) offering substantial power saving and heat reduction onboard compared to incandescent lighting. EuroLED 115mm lamps require no remote drivers or control wires, simply connect the positive and negative cables to 12V or 24V DC systems. Each lamp operates on an input voltage between 10-33V DC and can also be fully dimmed and controlled via PWM based products such as the Hella marine 2 Group Light Dimmer (5XA 998 572-001). Internal Multivolt electronics also provide robust reverse polarity, spoke and over-voltage protection for ongoing reliability. EuroLED lamps can be installed almost anywhere onboard, interior or exterior, wet or dry. The low heat signature will not cause damage to surrounding materials. Supplied with a spacer ring, the EuroLED 115mm can be surface or recessed mounted making this light compatible with a broad range of applications and installations. Switched versions are available pre-wired with an ON/OFF rocker switch integrated into the side of the housing. Hella marine LED downlights represent the very latest in class leading energy efficiency and maintenance free fit and forget technology. Lens Material UV resistant enhanced impact acrylic Rim Material UV resistant plastic. 316 stainless steel. Colour Temperature 5000K (White) Dimming PWM. eg Via to Hella marine 5XA 998 572-001 Cable Pre-wired with 500mm twin core marine cable Operating Voltage 10-33V DC Power Consumption < 4.5W ( <0.37A @ 12V / <0.18A @ 24V ) Degree of Protection IP 67 - Completely sealed Weight 170g (including cable) Installation Recess into 90mm cutout. Surface mount via spacer Approvals CE Manufacturing Location New Zealand
in 2 offers
Efficient EuroLED LED downlights provide a viable alternative to 20W incandescent lamps and offer substantial energy saving on board. Designed and manufactured in New Zealand, EuroLED 115mm LED downlights provide wide spread illumination with class leading colour rendering and interior enhancing colour temperatures in white (5000K) or warm white (3000K). Power consumption is less than 4.5W per lamp (<0.37A@12V / <0.18A@24V) offering substantial power saving and heat reduction onboard compared to incandescent lighting. EuroLED 115mm lamps require no remote drivers or control wires, simply connect the positive and negative cables to 12V or 24V DC systems. Each lamp operates on an input voltage between 10-33V DC and can also be fully dimmed and controlled via PWM based products such as the Hella marine 2 Group Light Dimmer (5XA 998 572-001). Internal Multivolt electronics also provide robust reverse polarity, spoke and over-voltage protection for ongoing reliability. EuroLED lamps can be installed almost anywhere onboard, interior or exterior, wet or dry. The low heat signature will not cause damage to surrounding materials. Supplied with a spacer ring, the EuroLED 115mm can be surface or recessed mounted making this light compatible with a broad range of applications and installations. Switched versions are available pre-wired with an ON/OFF rocker switch integrated into the side of the housing. Hella marine LED downlights represent the very latest in class leading energy efficiency and maintenance free fit and forget technology. Lens Material UV resistant enhanced impact acrylic Rim Material UV resistant plastic. 316 stainless steel. Colour Temperature 5000K (White) Dimming PWM. eg Via to Hella marine 5XA 998 572-001 Cable Pre-wired with 500mm twin core marine cable Operating Voltage 10-33V DC Power Consumption < 4.5W ( <0.37A @ 12V / <0.18A @ 24V ) Degree of Protection IP 67 - Completely sealed Weight 170g (including cable) Installation Recess into 90mm cutout. Surface mount via spacer Approvals CE Manufacturing Location New Zealand
Efficient EuroLED LED downlights provide a viable alternative to 20W incandescent lamps and offer substantial energy saving on board. Designed and manufactured in New Zealand, EuroLED 115mm LED downlights provide wide spread illumination with class leading colour rendering and interior enhancing colour temperatures in white (5000K) or warm white (3000K). Power consumption is less than 4.5W per lamp (<0.37A@12V / <0.18A@24V) offering substantial power saving and heat reduction onboard compared to incandescent lighting. EuroLED 115mm lamps require no remote drivers or control wires, simply connect the positive and negative cables to 12V or 24V DC systems. Each lamp operates on an input voltage between 10-33V DC and can also be fully dimmed and controlled via PWM based products such as the Hella marine 2 Group Light Dimmer (5XA 998 572-001). Internal Multivolt electronics also provide robust reverse polarity, spoke and over-voltage protection for ongoing reliability. EuroLED lamps can be installed almost anywhere onboard, interior or exterior, wet or dry. The low heat signature will not cause damage to surrounding materials. Supplied with a spacer ring, the EuroLED 115mm can be surface or recessed mounted making this light compatible with a broad range of applications and installations. Switched versions are available pre-wired with an ON/OFF rocker switch integrated into the side of the housing. Hella marine LED downlights represent the very latest in class leading energy efficiency and maintenance free fit and forget technology. Lens Material UV resistant enhanced impact acrylic Rim Material UV resistant plastic. 316 stainless steel. Colour Temperature 5000K (White) Dimming PWM. eg Via to Hella marine 5XA 998 572-001 Cable Pre-wired with 500mm twin core marine cable Operating Voltage 10-33V DC Power Consumption < 4.5W ( <0.37A @ 12V / <0.18A @ 24V ) Degree of Protection IP 67 - Completely sealed Weight 170g (including cable) Installation Recess into 90mm cutout. Surface mount via spacer Approvals CE Manufacturing Location New Zealand
Last updated at 17/11/2024 16:27:30
Go to store
See 3 more history offers
available about 2 months ago
Low stock
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
available 8 months ago
Low stock
available 12 months ago
Low stock
Updated about 6 hours ago
See 3 more history offers
