Last updated at 01/09/2026 05:15:18
HiKOKI 36 V Brushless Cordless Power Tools (4 Piece Set)
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
| Voltage | 36 Volt |
| Capacity | Masonry: 20mm; Wood: 102mm; Steel: 16mm |
| No Load Speed | 0 - 500 / 0 - 2,100 RPM |
| No Load Impact Rate | 0 - 31,500 RPM |
| Max Torque | Hard: 138Nm; Soft: 64Nm |
HiKOKI 36 V Brushless Cordless Power Tools (4 Piece Set)
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
| Voltage | 36 Volt |
| Capacity | Masonry: 20mm; Wood: 102mm; Steel: 16mm |
| No Load Speed | 0 - 500 / 0 - 2,100 RPM |
| No Load Impact Rate | 0 - 31,500 RPM |
| Max Torque | Hard: 138Nm; Soft: 64Nm |
HiKOKI 36V MultiVolt Brushless 4 Piece Combo Kit - KC36D4A2 HRZ
HiKOKI 36V MultiVolt Brushless 3 Piece Combo Kit This HiKOKI 36V MultiVolt Brushless 4 Piece Combo Kit comes with a 36V Impact Hammer Driver Drill (DV36DA), 36V 1/4” Impact Driver (WH36DC), 36V 125mm Paddle Angle Grinder (G3613DB), & a 36V SDS+ Rotary Hammer (DH36DPA). This kit includes 2x MultiVolt batteries, charger & a Large Site Bag to store everything in. Full Inclusion details listed below. This is a Combo/Kit. Batteries & Charger are Included. Kit Includes 1 x (DV36DA H4Z) HiKOKI 36V Brushless Impact (Hammer) Driver Drill Skin These DV36DA H4Z HiKOKI 36V MultiVolt Brushless Hammer Drill Drivers are a part of the 36V MultiVolt range, a next generation battery system which offers the ultimate flexibility of instantly switching from powering 36V tools to powering all of the HiKOKI / Hitachi 18V tools. These brushless hammer drills are capable of producing up to 138Nm of torque & can drill up to 20mm in masonry, 102mm in wood & 16mm in steel. They are also equipped with Reactive Force Control (RFC), a new safety feature that senses if the bit locks & stops the output power to reduce the kickback. - Wood: 102mm - Steel: 16mm No Load Speed 0 - 500 / 0 - 2,100 RPM No Load Impact Rate 0 - 31,500 RPM Max Torque Hard: 138Nm This is a Skin/Tool Only. Batteries & Charger are Not Included. Features - High torque impact driver5 Modes (Max, Bolt, Bolt Single, Soft, Self Drilling)IP56 dust & water resistance (Tool Only)Triple Hammer for high efficiency3 LED light provides more visibility in dark and compact areasSpecificationsPower36VMotorBrushlessCapacitySmall screw: 4 to 10 mm, Ordinary Bolt: 5 to 18 mm, High tension bolt: 5 to 14 mm, Self drilling screw: 3.5 to 6 mm in diameter - Tightening torque - Power mode: 215Nm, Bolt mode: 215Nm, Soft mode: 76Nm - No-load speed (with a battery fully charged at 20°C)Power mode: 0-3400 min, Bolt mode: 0-2900 min, Bolt single mode: 0-2900 min, Soft mode: 0-900 min, Self drilling screw mode: 0-3700 min - Impact rate (with a battery fully charged at 20°C)Power mode: 0-4100 min, Bolt mode: 0-4100 min, Bolt single mode: 0-4100 min, Soft mode: 0-2000 min, Self drilling screw mode: 0-2200 min - Drive 6.35 mm (1/4”) bit holder - Type of switch - Variable speed trigger switch with forward/reverse changeover lever (with brake)LED light - White LED (Always ON, Light only SW-ON, and Always OFF)Weight 1.6 kg - Dimensions (L x H ) 114 x 241 mm They have several safety functions, the fast brake system stops the disc within 2 seconds, kickback reduction, restart protection & soft start. Soft Start means that as the tool starts up it will temporarily reduce the load, torque & electric current surge of the motor so there is little to no kick on start up. The variable speed dial allows for the speed to change from 3,000 RPM up to 9,500RPM.Accessories: Side handle Grinding disc Wrench - Specifications: Voltage 36 Volt Wheel Diameter 125mm Spindle Thread M14 x 2 Switch Type Paddle No Load Speed Auto Mode 5,500 RPM Standard Mode 3,000 - 9,500 RPM
HiKOKI 36V MultiVolt Brushless 3 Piece Combo Kit This HiKOKI 36V MultiVolt Brushless 4 Piece Combo Kit comes with a 36V Impact Hammer Driver Drill (DV36DA), 36V 1/4” Impact Driver (WH36DC), 36V 125mm Paddle Angle Grinder (G3613DB), & a 36V SDS+ Rotary Hammer (DH36DPA). This kit includes 2x MultiVolt batteries, charger & a Large Site Bag to store everything in. Full Inclusion details listed below. This is a Combo/Kit. Batteries & Charger are Included. Kit Includes 1 x (DV36DA H4Z) HiKOKI 36V Brushless Impact (Hammer) Driver Drill Skin These DV36DA H4Z HiKOKI 36V MultiVolt Brushless Hammer Drill Drivers are a part of the 36V MultiVolt range, a next generation battery system which offers the ultimate flexibility of instantly switching from powering 36V tools to powering all of the HiKOKI / Hitachi 18V tools. These brushless hammer drills are capable of producing up to 138Nm of torque & can drill up to 20mm in masonry, 102mm in wood & 16mm in steel. They are also equipped with Reactive Force Control (RFC), a new safety feature that senses if the bit locks & stops the output power to reduce the kickback. - Wood: 102mm - Steel: 16mm No Load Speed 0 - 500 / 0 - 2,100 RPM No Load Impact Rate 0 - 31,500 RPM Max Torque Hard: 138Nm This is a Skin/Tool Only. Batteries & Charger are Not Included. Features - High torque impact driver5 Modes (Max, Bolt, Bolt Single, Soft, Self Drilling)IP56 dust & water resistance (Tool Only)Triple Hammer for high efficiency3 LED light provides more visibility in dark and compact areasSpecificationsPower36VMotorBrushlessCapacitySmall screw: 4 to 10 mm, Ordinary Bolt: 5 to 18 mm, High tension bolt: 5 to 14 mm, Self drilling screw: 3.5 to 6 mm in diameter - Tightening torque - Power mode: 215Nm, Bolt mode: 215Nm, Soft mode: 76Nm - No-load speed (with a battery fully charged at 20°C)Power mode: 0-3400 min, Bolt mode: 0-2900 min, Bolt single mode: 0-2900 min, Soft mode: 0-900 min, Self drilling screw mode: 0-3700 min - Impact rate (with a battery fully charged at 20°C)Power mode: 0-4100 min, Bolt mode: 0-4100 min, Bolt single mode: 0-4100 min, Soft mode: 0-2000 min, Self drilling screw mode: 0-2200 min - Drive 6.35 mm (1/4”) bit holder - Type of switch - Variable speed trigger switch with forward/reverse changeover lever (with brake)LED light - White LED (Always ON, Light only SW-ON, and Always OFF)Weight 1.6 kg - Dimensions (L x H ) 114 x 241 mm They have several safety functions, the fast brake system stops the disc within 2 seconds, kickback reduction, restart protection & soft start. Soft Start means that as the tool starts up it will temporarily reduce the load, torque & electric current surge of the motor so there is little to no kick on start up. The variable speed dial allows for the speed to change from 3,000 RPM up to 9,500RPM.Accessories: Side handle Grinding disc Wrench - Specifications: Voltage 36 Volt Wheel Diameter 125mm Spindle Thread M14 x 2 Switch Type Paddle No Load Speed Auto Mode 5,500 RPM Standard Mode 3,000 - 9,500 RPM
HiKOKI 36V MultiVolt Brushless 3 Piece Combo Kit This HiKOKI 36V MultiVolt Brushless 4 Piece Combo Kit comes with a 36V Impact Hammer Driver Drill (DV36DA), 36V 1/4” Impact Driver (WH36DC), 36V 125mm Paddle Angle Grinder (G3613DB), & a 36V SDS+ Rotary Hammer (DH36DPA). This kit includes 2x MultiVolt batteries, charger & a Large Site Bag to store everything in. Full Inclusion details listed below. This is a Combo/Kit. Batteries & Charger are Included. Kit Includes 1 x (DV36DA H4Z) HiKOKI 36V Brushless Impact (Hammer) Driver Drill Skin These DV36DA H4Z HiKOKI 36V MultiVolt Brushless Hammer Drill Drivers are a part of the 36V MultiVolt range, a next generation battery system which offers the ultimate flexibility of instantly switching from powering 36V tools to powering all of the HiKOKI / Hitachi 18V tools. These brushless hammer drills are capable of producing up to 138Nm of torque & can drill up to 20mm in masonry, 102mm in wood & 16mm in steel. They are also equipped with Reactive Force Control (RFC), a new safety feature that senses if the bit locks & stops the output power to reduce the kickback. - Wood: 102mm - Steel: 16mm No Load Speed 0 - 500 / 0 - 2,100 RPM No Load Impact Rate 0 - 31,500 RPM Max Torque Hard: 138Nm This is a Skin/Tool Only. Batteries & Charger are Not Included. Features - High torque impact driver5 Modes (Max, Bolt, Bolt Single, Soft, Self Drilling)IP56 dust & water resistance (Tool Only)Triple Hammer for high efficiency3 LED light provides more visibility in dark and compact areasSpecificationsPower36VMotorBrushlessCapacitySmall screw: 4 to 10 mm, Ordinary Bolt: 5 to 18 mm, High tension bolt: 5 to 14 mm, Self drilling screw: 3.5 to 6 mm in diameter - Tightening torque - Power mode: 215Nm, Bolt mode: 215Nm, Soft mode: 76Nm - No-load speed (with a battery fully charged at 20°C)Power mode: 0-3400 min, Bolt mode: 0-2900 min, Bolt single mode: 0-2900 min, Soft mode: 0-900 min, Self drilling screw mode: 0-3700 min - Impact rate (with a battery fully charged at 20°C)Power mode: 0-4100 min, Bolt mode: 0-4100 min, Bolt single mode: 0-4100 min, Soft mode: 0-2000 min, Self drilling screw mode: 0-2200 min - Drive 6.35 mm (1/4”) bit holder - Type of switch - Variable speed trigger switch with forward/reverse changeover lever (with brake)LED light - White LED (Always ON, Light only SW-ON, and Always OFF)Weight 1.6 kg - Dimensions (L x H ) 114 x 241 mm They have several safety functions, the fast brake system stops the disc within 2 seconds, kickback reduction, restart protection & soft start. Soft Start means that as the tool starts up it will temporarily reduce the load, torque & electric current surge of the motor so there is little to no kick on start up. The variable speed dial allows for the speed to change from 3,000 RPM up to 9,500RPM.Accessories: Side handle Grinding disc Wrench - Specifications: Voltage 36 Volt Wheel Diameter 125mm Spindle Thread M14 x 2 Switch Type Paddle No Load Speed Auto Mode 5,500 RPM Standard Mode 3,000 - 9,500 RPM
HiKOKI 36V MultiVolt Brushless 3 Piece Combo Kit This HiKOKI 36V MultiVolt Brushless 4 Piece Combo Kit comes with a 36V Impact Hammer Driver Drill (DV36DA), 36V 1/4” Impact Driver (WH36DC), 36V 125mm Paddle Angle Grinder (G3613DB), & a 36V SDS+ Rotary Hammer (DH36DPA). This kit includes 2x MultiVolt batteries, charger & a Large Site Bag to store everything in. Full Inclusion details listed below. This is a Combo/Kit. Batteries & Charger are Included. Kit Includes 1 x (DV36DA H4Z) HiKOKI 36V Brushless Impact (Hammer) Driver Drill Skin These DV36DA H4Z HiKOKI 36V MultiVolt Brushless Hammer Drill Drivers are a part of the 36V MultiVolt range, a next generation battery system which offers the ultimate flexibility of instantly switching from powering 36V tools to powering all of the HiKOKI / Hitachi 18V tools. These brushless hammer drills are capable of producing up to 138Nm of torque & can drill up to 20mm in masonry, 102mm in wood & 16mm in steel. They are also equipped with Reactive Force Control (RFC), a new safety feature that senses if the bit locks & stops the output power to reduce the kickback. - Wood: 102mm - Steel: 16mm No Load Speed 0 - 500 / 0 - 2,100 RPM No Load Impact Rate 0 - 31,500 RPM Max Torque Hard: 138Nm This is a Skin/Tool Only. Batteries & Charger are Not Included. Features - High torque impact driver5 Modes (Max, Bolt, Bolt Single, Soft, Self Drilling)IP56 dust & water resistance (Tool Only)Triple Hammer for high efficiency3 LED light provides more visibility in dark and compact areasSpecificationsPower36VMotorBrushlessCapacitySmall screw: 4 to 10 mm, Ordinary Bolt: 5 to 18 mm, High tension bolt: 5 to 14 mm, Self drilling screw: 3.5 to 6 mm in diameter - Tightening torque - Power mode: 215Nm, Bolt mode: 215Nm, Soft mode: 76Nm - No-load speed (with a battery fully charged at 20°C)Power mode: 0-3400 min, Bolt mode: 0-2900 min, Bolt single mode: 0-2900 min, Soft mode: 0-900 min, Self drilling screw mode: 0-3700 min - Impact rate (with a battery fully charged at 20°C)Power mode: 0-4100 min, Bolt mode: 0-4100 min, Bolt single mode: 0-4100 min, Soft mode: 0-2000 min, Self drilling screw mode: 0-2200 min - Drive 6.35 mm (1/4”) bit holder - Type of switch - Variable speed trigger switch with forward/reverse changeover lever (with brake)LED light - White LED (Always ON, Light only SW-ON, and Always OFF)Weight 1.6 kg - Dimensions (L x H ) 114 x 241 mm They have several safety functions, the fast brake system stops the disc within 2 seconds, kickback reduction, restart protection & soft start. Soft Start means that as the tool starts up it will temporarily reduce the load, torque & electric current surge of the motor so there is little to no kick on start up. The variable speed dial allows for the speed to change from 3,000 RPM up to 9,500RPM.Accessories: Side handle Grinding disc Wrench - Specifications: Voltage 36 Volt Wheel Diameter 125mm Spindle Thread M14 x 2 Switch Type Paddle No Load Speed Auto Mode 5,500 RPM Standard Mode 3,000 - 9,500 RPM
in 1 offers
The lowest price for HiKOKI 36V MultiVolt Brushless 4 Piece Combo Kit - KC36D4A2 HRZ right now is $2,338.50 at Amazon.com.au.
The all-time low was $2,338.50 on 1 Sept 2026. That's the lowest price we've ever tracked — a great time to buy.
Prices last updated 1 Sept 2026.
