IP-806040 Electrical Enclosure 800Hx600Wx400D, IP66 Features & Specifications SKU: IP-806040 | MPN: IP-806040 Protection: IP66 IK10 (NEMA 4) Standards (& Conformities): IEC/EN 60529, IEC/EN 62208, IEC/EN 61439, UL, RoHS, CE, UKCA Material: – Body: 1.2mm galvanised steel sheet – Gland Plate: 1.5mm galvanised steel sheet – Door: 1.5mm galvanised steel sheet – Device Mounting Plate: 1.5mm galvanised steel sheet – Seal: Polyurethane Enclosure Body: The robust monoblock body is fabricated using galvanised steel sheet (1.2mm-1.5mm). Flat face sealing surfaces are provided to increase seal life. Pre-fitted blind nutserts are incorporated to accommodate mounts and accessory fasteners to eliminate drilling and retain IP rating. Integral device plate mounts and M6 earth studs are provided. A galvanised steel gland plate is incorporated into the bottom face. Cutting, pressing and full continuous seam welding using precision automated manufacturing equipment ensures accuracy and consistent high quality. Enclosure Door: The robust surface mounted door is fabricated using 1.5mm galvanised steel sheet and incorporates concealed removable hinges with captive pins. The door is designed for a 110° opening. Each door contains cable management rails, an M6 earth stud and a high quality machine-applied foamed in place (FIP) Polyurethane seal. Two internal cable management rails can be removed to provide additional space for equipment, duct and door mounted control components. Enclosure Seal: A high quality machine-applied full perimeter UL listed Polyurethane seal foamed in place (FIP) provides excellent sealing over a long life. Temperature resistance -40°C to 80°C (160°C short term loading). Enclosure Lock: Chrome 5mm double bit insert quarter turn lock with key. A full range of locking solutions are available upon request. Device Mounting Plate: The device mounting plate is 1.5mm galvanised steel sheet. It is pressed to provide strength. It is pre-fitted into the enclosure as standard. Gland Plate: Gland plates are incorporated into the bottom face of the enclosure for cable management. They are provided with gaskets and fasteners. The size and quantity vary according to enclosure size. Surface Treatment: UL approved epoxy polyester powder-coated with a textured finish. 80-120 micron average thickness.
IP-806040 Electrical Enclosure 800Hx600Wx400D, IP66 Features & Specifications SKU: IP-806040 | MPN: IP-806040 Protection: IP66 IK10 (NEMA 4) Standards (& Conformities): IEC/EN 60529, IEC/EN 62208, IEC/EN 61439, UL, RoHS, CE, UKCA Material: – Body: 1.2mm galvanised steel sheet – Gland Plate: 1.5mm galvanised steel sheet – Door: 1.5mm galvanised steel sheet – Device Mounting Plate: 1.5mm galvanised steel sheet – Seal: Polyurethane Enclosure Body: The robust monoblock body is fabricated using galvanised steel sheet (1.2mm-1.5mm). Flat face sealing surfaces are provided to increase seal life. Pre-fitted blind nutserts are incorporated to accommodate mounts and accessory fasteners to eliminate drilling and retain IP rating. Integral device plate mounts and M6 earth studs are provided. A galvanised steel gland plate is incorporated into the bottom face. Cutting, pressing and full continuous seam welding using precision automated manufacturing equipment ensures accuracy and consistent high quality. Enclosure Door: The robust surface mounted door is fabricated using 1.5mm galvanised steel sheet and incorporates concealed removable hinges with captive pins. The door is designed for a 110° opening. Each door contains cable management rails, an M6 earth stud and a high quality machine-applied foamed in place (FIP) Polyurethane seal. Two internal cable management rails can be removed to provide additional space for equipment, duct and door mounted control components. Enclosure Seal: A high quality machine-applied full perimeter UL listed Polyurethane seal foamed in place (FIP) provides excellent sealing over a long life. Temperature resistance -40°C to 80°C (160°C short term loading). Enclosure Lock: Chrome 5mm double bit insert quarter turn lock with key. A full range of locking solutions are available upon request. Device Mounting Plate: The device mounting plate is 1.5mm galvanised steel sheet. It is pressed to provide strength. It is pre-fitted into the enclosure as standard. Gland Plate: Gland plates are incorporated into the bottom face of the enclosure for cable management. They are provided with gaskets and fasteners. The size and quantity vary according to enclosure size. Surface Treatment: UL approved epoxy polyester powder-coated with a textured finish. 80-120 micron average thickness.
in 1 offers
IP-806040 Electrical Enclosure 800Hx600Wx400D, IP66 Features & Specifications SKU: IP-806040 | MPN: IP-806040 Protection: IP66 IK10 (NEMA 4) Standards (& Conformities): IEC/EN 60529, IEC/EN 62208, IEC/EN 61439, UL, RoHS, CE, UKCA Material: – Body: 1.2mm galvanised steel sheet – Gland Plate: 1.5mm galvanised steel sheet – Door: 1.5mm galvanised steel sheet – Device Mounting Plate: 1.5mm galvanised steel sheet – Seal: Polyurethane Enclosure Body: The robust monoblock body is fabricated using galvanised steel sheet (1.2mm-1.5mm). Flat face sealing surfaces are provided to increase seal life. Pre-fitted blind nutserts are incorporated to accommodate mounts and accessory fasteners to eliminate drilling and retain IP rating. Integral device plate mounts and M6 earth studs are provided. A galvanised steel gland plate is incorporated into the bottom face. Cutting, pressing and full continuous seam welding using precision automated manufacturing equipment ensures accuracy and consistent high quality. Enclosure Door: The robust surface mounted door is fabricated using 1.5mm galvanised steel sheet and incorporates concealed removable hinges with captive pins. The door is designed for a 110° opening. Each door contains cable management rails, an M6 earth stud and a high quality machine-applied foamed in place (FIP) Polyurethane seal. Two internal cable management rails can be removed to provide additional space for equipment, duct and door mounted control components. Enclosure Seal: A high quality machine-applied full perimeter UL listed Polyurethane seal foamed in place (FIP) provides excellent sealing over a long life. Temperature resistance -40°C to 80°C (160°C short term loading). Enclosure Lock: Chrome 5mm double bit insert quarter turn lock with key. A full range of locking solutions are available upon request. Device Mounting Plate: The device mounting plate is 1.5mm galvanised steel sheet. It is pressed to provide strength. It is pre-fitted into the enclosure as standard. Gland Plate: Gland plates are incorporated into the bottom face of the enclosure for cable management. They are provided with gaskets and fasteners. The size and quantity vary according to enclosure size. Surface Treatment: UL approved epoxy polyester powder-coated with a textured finish. 80-120 micron average thickness.
IP-806040 Electrical Enclosure 800Hx600Wx400D, IP66 Features & Specifications SKU: IP-806040 | MPN: IP-806040 Protection: IP66 IK10 (NEMA 4) Standards (& Conformities): IEC/EN 60529, IEC/EN 62208, IEC/EN 61439, UL, RoHS, CE, UKCA Material: – Body: 1.2mm galvanised steel sheet – Gland Plate: 1.5mm galvanised steel sheet – Door: 1.5mm galvanised steel sheet – Device Mounting Plate: 1.5mm galvanised steel sheet – Seal: Polyurethane Enclosure Body: The robust monoblock body is fabricated using galvanised steel sheet (1.2mm-1.5mm). Flat face sealing surfaces are provided to increase seal life. Pre-fitted blind nutserts are incorporated to accommodate mounts and accessory fasteners to eliminate drilling and retain IP rating. Integral device plate mounts and M6 earth studs are provided. A galvanised steel gland plate is incorporated into the bottom face. Cutting, pressing and full continuous seam welding using precision automated manufacturing equipment ensures accuracy and consistent high quality. Enclosure Door: The robust surface mounted door is fabricated using 1.5mm galvanised steel sheet and incorporates concealed removable hinges with captive pins. The door is designed for a 110° opening. Each door contains cable management rails, an M6 earth stud and a high quality machine-applied foamed in place (FIP) Polyurethane seal. Two internal cable management rails can be removed to provide additional space for equipment, duct and door mounted control components. Enclosure Seal: A high quality machine-applied full perimeter UL listed Polyurethane seal foamed in place (FIP) provides excellent sealing over a long life. Temperature resistance -40°C to 80°C (160°C short term loading). Enclosure Lock: Chrome 5mm double bit insert quarter turn lock with key. A full range of locking solutions are available upon request. Device Mounting Plate: The device mounting plate is 1.5mm galvanised steel sheet. It is pressed to provide strength. It is pre-fitted into the enclosure as standard. Gland Plate: Gland plates are incorporated into the bottom face of the enclosure for cable management. They are provided with gaskets and fasteners. The size and quantity vary according to enclosure size. Surface Treatment: UL approved epoxy polyester powder-coated with a textured finish. 80-120 micron average thickness.
Size
Last updated at 15/05/2025 00:30:16
See 1 more history offers
See 1 more history offers
