The Bag Awning is not included (but is available in separate listings). The awning walls are the current stock matching the current range of Jayco Bag Awnings. Please note it's unlikely these will fit any other bag awning apart from the 2012+ Jayco branded bag awnings due to a difference in distance coming out from the van, method of attachment and/or zip size. They will not fit the "Prestige" Jayco labelled awnings as these are manufactured by a different supplier for a specific Jayco dealership. Note while refered to as 12 foot, the long wall is shorter than this (approximately 3.4m long). The end / side walls are approx. 2.25m coming out from the van, matching the current bag awning. Features: 2 doors with fly screen / mesh doors for ventilations / light options; 4 fly screen windows with clear rain covers and canvas block-out covers; A draft skirt to close out the gap between the bottom of the van and the ground. Please note the draft skirt has the cut out for the steps and a wheel arch cover to suit the Jayco Swan, Flamingo and the new layout (2013+) Penguin. . Other models and brands may not have these located in the right position (This includes the older versions of the Penguin AND a limited number of 2014/15 model Penguins). The buyer is responsible for the costs of altering if necessary which can be expected to be around $70 to $100. Canvas Type: The walls are constructed of weaved high quality polyester canvas with yarns (0.46mm thick). Polyester is known for its strength and durability. It is resistant to stretching, shrinking, wrinkles, mildew, scratching and even some chemicals. Another benefit of polyester canvas is that it is easy to wash and dry The windows are made from clear PVC with a 0.27mm thickness - these can be rolled up for ventilation. The side wall and front wall mudflaps are manufactured from a non-fraying, PVC with webbing. The draft and wheel covers are made from a light weight PVC with webbing. Included in the package are: A handy storage bag for the awning walls and equipment; All pegs required (with peg bag); Side draft skirt; Important Installation Details: Note the awning walls need side annexe tracks and a bottom track and/or press studs for the skirt. The aluminium annexe tracks and studs are not included. This is a relatively simple procedure for annexe installations and can be done for approx. $150 by your local trimmer or another annexe / caravan service provider. It could also be done by the average handyman by purchasing the hardware. The annexe height is suited to both the Touring and taller Outback camper trailer models. The bottom 30cm grey strip is designed to be cut off for the shorter touring models.