【Easy Installation and Portable】:The light has a built-in magnet, which can be adsorbed on any iron surface. You can also use double-sided tape and iron sheet to attach the light to any place. Portable, you can remove the light from the magnet to anywhere for lighting. 【USB Rechargeable and Save electricity】:Every light has 35 super bright beads(150lm). Every light is powered by 1700mah rechargeable battery(included). Charging through usb data cable, you can charge through rechargeable battery, computer. 【Three colors to choose】, cool white(6000-6500k) natural white(4000-4500k) warm white(2800-3000k). press the SETUP button once to choose one color on. long press the button, can adjust the brightness. 【Three level working modes】:ON-OFF-G , G is the light will turn on automatically if it senses human motion in dark conditions and night. ON :always keep on.OFF:be off 【Multi-purpose】:Cabinets, farmhouses, shoe cabinets, RVs, warehouses, closets, and of course portable, can serve as lighting . Material: Plastic+Aluminum+LED *Number of lamp beads: 35 LEDs *Light colour: 3color(cool/nature/warm) *Power Source:Rechargeable Battery(in cluded) *Battery Capacity:1700mah *Luminous Flux: 150lm (+/-20%) *Product Dimensions: 8.03× 1.69 × 0.43 inches *Average Life:>60000 Hours *Sensing distance: within 3-5meters *Sensing angle: 120 degrees Standard configuration: 1 x wireless motion sensor LED light 1 x Ironhide 1 x double-sided tape 1 x USB cable 1 x User Manual Caution[Under Motion Sensor Mode] Light won’t light up during day time when it is bright enough. * If you want it light up in day time, just cover the motion sensor for a moment. The light of one night light may cause the other not light up if they are too close. The Lepotec LED lights can last for about 6.5-14(based on different product) hours after fully charged. Stick On LED LightWireless installation takes less than 3 minutes with the included double-sided tape and magnetic strip. No tools, screws or nuts are required. Just stick it anywhere you want, and it allows you to take the light bar off to recharge easily. Two ways to Install:1. Built-in magnet on the back of light allows it to absorb on any ironwork surface.2. Stick on any non-ironwork surface with the included 3M Adhesive Magnetic strip.
【Easy Installation and Portable】:The light has a built-in magnet, which can be adsorbed on any iron surface. You can also use double-sided tape and iron sheet to attach the light to any place. Portable, you can remove the light from the magnet to anywhere for lighting. 【USB Rechargeable and Save electricity】:Every light has 35 super bright beads(150lm). Every light is powered by 1700mah rechargeable battery(included). Charging through usb data cable, you can charge through rechargeable battery, computer. 【Three colors to choose】, cool white(6000-6500k) natural white(4000-4500k) warm white(2800-3000k). press the SETUP button once to choose one color on. long press the button, can adjust the brightness. 【Three level working modes】:ON-OFF-G , G is the light will turn on automatically if it senses human motion in dark conditions and night. ON :always keep on.OFF:be off 【Multi-purpose】:Cabinets, farmhouses, shoe cabinets, RVs, warehouses, closets, and of course portable, can serve as lighting . Material: Plastic+Aluminum+LED *Number of lamp beads: 35 LEDs *Light colour: 3color(cool/nature/warm) *Power Source:Rechargeable Battery(in cluded) *Battery Capacity:1700mah *Luminous Flux: 150lm (+/-20%) *Product Dimensions: 8.03× 1.69 × 0.43 inches *Average Life:>60000 Hours *Sensing distance: within 3-5meters *Sensing angle: 120 degrees Standard configuration: 1 x wireless motion sensor LED light 1 x Ironhide 1 x double-sided tape 1 x USB cable 1 x User Manual Caution[Under Motion Sensor Mode] Light won’t light up during day time when it is bright enough. * If you want it light up in day time, just cover the motion sensor for a moment. The light of one night light may cause the other not light up if they are too close. The Lepotec LED lights can last for about 6.5-14(based on different product) hours after fully charged. Stick On LED LightWireless installation takes less than 3 minutes with the included double-sided tape and magnetic strip. No tools, screws or nuts are required. Just stick it anywhere you want, and it allows you to take the light bar off to recharge easily. Two ways to Install:1. Built-in magnet on the back of light allows it to absorb on any ironwork surface.2. Stick on any non-ironwork surface with the included 3M Adhesive Magnetic strip.
in 1 offers
【Easy Installation and Portable】:The light has a built-in magnet, which can be adsorbed on any iron surface. You can also use double-sided tape and iron sheet to attach the light to any place. Portable, you can remove the light from the magnet to anywhere for lighting. 【USB Rechargeable and Save electricity】:Every light has 35 super bright beads(150lm). Every light is powered by 1700mah rechargeable battery(included). Charging through usb data cable, you can charge through rechargeable battery, computer. 【Three colors to choose】, cool white(6000-6500k) natural white(4000-4500k) warm white(2800-3000k). press the SETUP button once to choose one color on. long press the button, can adjust the brightness. 【Three level working modes】:ON-OFF-G , G is the light will turn on automatically if it senses human motion in dark conditions and night. ON :always keep on.OFF:be off 【Multi-purpose】:Cabinets, farmhouses, shoe cabinets, RVs, warehouses, closets, and of course portable, can serve as lighting . Material: Plastic+Aluminum+LED *Number of lamp beads: 35 LEDs *Light colour: 3color(cool/nature/warm) *Power Source:Rechargeable Battery(in cluded) *Battery Capacity:1700mah *Luminous Flux: 150lm (+/-20%) *Product Dimensions: 8.03× 1.69 × 0.43 inches *Average Life:>60000 Hours *Sensing distance: within 3-5meters *Sensing angle: 120 degrees Standard configuration: 1 x wireless motion sensor LED light 1 x Ironhide 1 x double-sided tape 1 x USB cable 1 x User Manual Caution[Under Motion Sensor Mode] Light won’t light up during day time when it is bright enough. * If you want it light up in day time, just cover the motion sensor for a moment. The light of one night light may cause the other not light up if they are too close. The Lepotec LED lights can last for about 6.5-14(based on different product) hours after fully charged. Stick On LED LightWireless installation takes less than 3 minutes with the included double-sided tape and magnetic strip. No tools, screws or nuts are required. Just stick it anywhere you want, and it allows you to take the light bar off to recharge easily. Two ways to Install:1. Built-in magnet on the back of light allows it to absorb on any ironwork surface.2. Stick on any non-ironwork surface with the included 3M Adhesive Magnetic strip.
【Easy Installation and Portable】:The light has a built-in magnet, which can be adsorbed on any iron surface. You can also use double-sided tape and iron sheet to attach the light to any place. Portable, you can remove the light from the magnet to anywhere for lighting. 【USB Rechargeable and Save electricity】:Every light has 35 super bright beads(150lm). Every light is powered by 1700mah rechargeable battery(included). Charging through usb data cable, you can charge through rechargeable battery, computer. 【Three colors to choose】, cool white(6000-6500k) natural white(4000-4500k) warm white(2800-3000k). press the SETUP button once to choose one color on. long press the button, can adjust the brightness. 【Three level working modes】:ON-OFF-G , G is the light will turn on automatically if it senses human motion in dark conditions and night. ON :always keep on.OFF:be off 【Multi-purpose】:Cabinets, farmhouses, shoe cabinets, RVs, warehouses, closets, and of course portable, can serve as lighting . Material: Plastic+Aluminum+LED *Number of lamp beads: 35 LEDs *Light colour: 3color(cool/nature/warm) *Power Source:Rechargeable Battery(in cluded) *Battery Capacity:1700mah *Luminous Flux: 150lm (+/-20%) *Product Dimensions: 8.03× 1.69 × 0.43 inches *Average Life:>60000 Hours *Sensing distance: within 3-5meters *Sensing angle: 120 degrees Standard configuration: 1 x wireless motion sensor LED light 1 x Ironhide 1 x double-sided tape 1 x USB cable 1 x User Manual Caution[Under Motion Sensor Mode] Light won’t light up during day time when it is bright enough. * If you want it light up in day time, just cover the motion sensor for a moment. The light of one night light may cause the other not light up if they are too close. The Lepotec LED lights can last for about 6.5-14(based on different product) hours after fully charged. Stick On LED LightWireless installation takes less than 3 minutes with the included double-sided tape and magnetic strip. No tools, screws or nuts are required. Just stick it anywhere you want, and it allows you to take the light bar off to recharge easily. Two ways to Install:1. Built-in magnet on the back of light allows it to absorb on any ironwork surface.2. Stick on any non-ironwork surface with the included 3M Adhesive Magnetic strip.
Last updated at 11/11/2024 07:40:33
Go to store
See 2 more history offers
available 23 days ago
Low stock
available 23 days ago
Low stock
Updated 1 day ago
See 2 more history offers
