Lian Li Lancool 207RX Mid-Tower Chassis RGB Black
The LANCOOL 207 is a compact M-ATX-sized case with ATX compatibility. It accommodates a 360mm radiator on top, ATX motherboards, ATX PSUs, and GPUs up to 410mm in length. The case includes pre-installed 140mm ARGB fans at the front and 120mm PWM fans at the bottom for optimal cooling. Large mesh panels on the front, top, and bottom improve ventilation, and the offset motherboard position maximizes cooling for the GPU. The front PSU installation aids in cable management and provides tidy organization.
The LANCOOL 207 is a compact M-ATX-sized case with ATX compatibility. It accommodates a 360mm radiator on top, ATX motherboards, ATX PSUs, and GPUs up to 410mm in length. The case includes pre-installed 140mm ARGB fans at the front and 120mm PWM fans at the bottom for optimal cooling. Large mesh panels on the front, top, and bottom improve ventilation, and the offset motherboard position maximizes cooling for the GPU. The front PSU installation aids in cable management and provides tidy organization.
The LANCOOL 207 is a compact M-ATX-sized case with ATX compatibility. It accommodates a 360mm radiator on top, ATX motherboards, ATX PSUs, and GPUs up to 410mm in length. The case includes pre-installed 140mm ARGB fans at the front and 120mm PWM fans at the bottom for optimal cooling. Large mesh panels on the front, top, and bottom improve ventilation, and the offset motherboard position maximizes cooling for the GPU. The front PSU installation aids in cable management and provides tidy organization.
The LANCOOL 207 is a compact M-ATX-sized case with ATX compatibility. It accommodates a 360mm radiator on top, ATX motherboards, ATX PSUs, and GPUs up to 410mm in length. The case includes pre-installed 140mm ARGB fans at the front and 120mm PWM fans at the bottom for optimal cooling. Large mesh panels on the front, top, and bottom improve ventilation, and the offset motherboard position maximizes cooling for the GPU. The front PSU installation aids in cable management and provides tidy organization.
in 11 offers
The lowest price for Lian Li Lancool 207RX Mid-Tower Chassis RGB Black right now is $125.00 at Centre Com, compared across 11 retailers.
The all-time low was $119.00 on 15 May 2026 — today's price is 5% above the lowest ever. This is at or near its all-time low — a good time to buy.
Prices last updated 24 July 2026.
Last updated at 24/07/2026 10:21:06
Lian Li LANCOOL 207 RGB Tempered Glass Mid-Tower Case - Black
Delivery between 28–31 July $52.86
Lian Li LanCool 207RX TG ARGB Mid Tower ATX Case Black PC LAN207RX - Lian Li Cases
Delivery $33.44
Lian Li Lancool 207RX MID-Tower Chassis RGB Black PC-LAN207RX | Best Online Computer Store
Delivery between 30 July – 6 Aug $25.25
Lian Li Lancool 207 - Compact Mid Tower ATX Case (Black)
Delivery between 28 July – 6 Aug $34.86
Lian Li lancool 207RX MID-Tower Chassis RGB Black [PC-LAN207RX]
14-day returns
Lian Li lancool 207RX MID-Tower Chassis RGB Black [PC-LAN207RX]
Delivery $31
Lian Li PC-LAN207RX, Lancool 207, ATX, Mid Tower, Tempered Glass, Drive Bays: 2u3.5 HDD or 2.5 SSD, Expansion Slot: 7, Fan: 2x140mm, 2x120mm,
Delivery between 29–31 July $16
Lian Li Lancool 207rx Mid-tower Chassis Rgb Black Pc-lan207rx
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Lli Cas Pc-LAN207RX-Black
Lian Li LANCOOL 207 RGB Tempered Glass Mid-Tower Case - Black
Delivery $20
originally posted on shopee.com.my
Performance:Amazing quality and airflow for the priceGreat value
originally posted on digitec.ch
Good budget case at MSRP price (80$)
originally posted on pccasegear.com
Of note in regards to PSU compatibility : YMMVI just put in a 17cm psu (prime px 1000w) in my new 207 case, and I can close the back side of the case, with no pressure on the connectors into the psu.I was quite surprised, given they recommend 150mm psu's, and the reported limit is 160mm psu's.The cables do have to bend 90 degrees once out of the connector. But the connectors have no pressure on them that is pushing them sideways/up/down from what I can see/feel, as I can just slide the side panel in place, push it up, and clicks in place, with no pressure.I doubt sleeved or braided custom cables would work though with a 17cm psu though, only simple plastic ones that can be prebent into an L shape when they come out of the connectors(such as with seasonic prime ... MoreOf note in regards to PSU compatibility : YMMVI just put in a 17cm psu (prime px 1000w) in my new 207 case, and I can close the back side of the case, with no pressure on the connectors into the psu.I was quite surprised, given they recommend 150mm psu's, and the reported limit is 160mm psu's.The cables do have to bend 90 degrees once out of the connector. But the connectors have no pressure on them that is pushing them sideways/up/down from what I can see/feel, as I can just slide the side panel in place, push it up, and clicks in place, with no pressure.I doubt sleeved or braided custom cables would work though with a 17cm psu though, only simple plastic ones that can be prebent into an L shape when they come out of the connectors(such as with seasonic prime px psu's).You will need to arrange them so that you can route them carefully around/over the m/b power cable, but for my build, I only needed the dual connector m/b power cable, 2 eps, 2 sata daisy, and 2 pci-e, so I just spread them around the m/b power cable, so that none of them were bulging out, and rarely overlayed each other.Hope this helps anyone who is considering this case, and is worried about psu compatibility.And yeah, I consider this case to be the spiritual successor to the Fractal Design Core 2500. It even looks the same at the front with the beveled edges.But it has an improved design over the core 2500 all over the case, as instead of a side fan, it has dual upfacing fans below the gpu, which will also give great airflow over 2x 3.5" hard drives that fit in the area underneath. The sideways psu is a blessing for cable management. And it can pretty much fit all but the biggest gpu's, and even has a built in gpu brace. All in a very compact case size with one of the best thermal profiles out there. Such a great case.
| Max Supported Motherboard | ATX |
| Side Panel | Tempered Glass (TG) |
| Colour (Exterior) | Black |
| Lighting | RGB |
| Max GPU Length | 370 - 400mm |
Lian Li LANCOOL 207 RGB Tempered Glass Mid-Tower Case - Black
Delivery between 28–31 July $52.86
Lian Li LanCool 207RX TG ARGB Mid Tower ATX Case Black PC LAN207RX - Lian Li Cases
Delivery $33.44
Lian Li Lancool 207RX MID-Tower Chassis RGB Black PC-LAN207RX | Best Online Computer Store
Delivery between 30 July – 6 Aug $25.25
Lian Li Lancool 207 - Compact Mid Tower ATX Case (Black)
Delivery between 28 July – 6 Aug $34.86
Lian Li lancool 207RX MID-Tower Chassis RGB Black [PC-LAN207RX]
14-day returns
Performance:Amazing quality and airflow for the priceGreat value
Good budget case at MSRP price (80$)
Of note in regards to PSU compatibility : YMMVI just put in a 17cm psu (prime px 1000w) in my new 207 case, and I can close the back side of the case, with no pressure on the connectors into the psu.I was quite surprised, given they recommend 150mm psu's, and the reported limit is 160mm psu's.The cables do have to bend 90 degrees once out of the connector. But the connectors have no pressure on them that is pushing them sideways/up/down from what I can see/feel, as I can just slide the side panel in place, push it up, and clicks in place, with no pressure.I doubt sleeved or braided custom cables would work though with a 17cm psu though, only simple plastic ones that can be prebent into an L shape when they come out of the connectors(such as with seasonic prime ... MoreOf note in regards to PSU compatibility : YMMVI just put in a 17cm psu (prime px 1000w) in my new 207 case, and I can close the back side of the case, with no pressure on the connectors into the psu.I was quite surprised, given they recommend 150mm psu's, and the reported limit is 160mm psu's.The cables do have to bend 90 degrees once out of the connector. But the connectors have no pressure on them that is pushing them sideways/up/down from what I can see/feel, as I can just slide the side panel in place, push it up, and clicks in place, with no pressure.I doubt sleeved or braided custom cables would work though with a 17cm psu though, only simple plastic ones that can be prebent into an L shape when they come out of the connectors(such as with seasonic prime px psu's).You will need to arrange them so that you can route them carefully around/over the m/b power cable, but for my build, I only needed the dual connector m/b power cable, 2 eps, 2 sata daisy, and 2 pci-e, so I just spread them around the m/b power cable, so that none of them were bulging out, and rarely overlayed each other.Hope this helps anyone who is considering this case, and is worried about psu compatibility.And yeah, I consider this case to be the spiritual successor to the Fractal Design Core 2500. It even looks the same at the front with the beveled edges.But it has an improved design over the core 2500 all over the case, as instead of a side fan, it has dual upfacing fans below the gpu, which will also give great airflow over 2x 3.5" hard drives that fit in the area underneath. The sideways psu is a blessing for cable management. And it can pretty much fit all but the biggest gpu's, and even has a built in gpu brace. All in a very compact case size with one of the best thermal profiles out there. Such a great case.
| Max Supported Motherboard | ATX |
| Side Panel | Tempered Glass (TG) |
| Colour (Exterior) | Black |
| Lighting | RGB |
| Max GPU Length | 370 - 400mm |