O11D EVO Upright GPU Kit Show off your graphics card in a unique way with the exclusive upright GPU bracket, including a PCIe 4.0 riser cable for seamless connectivity. TWO MOUNTING WAYS WORK ON BOTH MODES Both HDD tray panel and fan bracket support to mount upright GPU kit on normal or reverse mode. HDD TRAY PANEL SCENARIO Supreme Water-Cooling Configuration - Normal Mode with HDD Tray Panel Scenario Moving the GPU next to the motherboard opens up the main chamber in the chassis for the tubes to pass through and creates a chimney-style airflow, effectively cooling the top and bottom radiator. Ultimate Air-Cooling Configuration - Normal Mode with HDD Tray Panel Scenario Paired with the upright GPU kit, the front mesh kit provides the O11D EVO with additional fresh air intake from the front to better cool the GPU and the CPU. FAN BRACKET SCENARIO - Extreme AIO-cooling configuration Reverse Mode at Fan Bracket Scenario Exhaust fans behind the GPU directly pull the heat out of the chamber, effectively control the GPU temperature. Reverse Mode with Front Mesh Kit at Fan Bracket Scenario Replace the glass panel to the front mesh kit brings further fresh air into the chassis to cool the CPU and GPU efficiently. SUPPORT WIDE VARIETY SIZES GPU While the bracket supports up to 3 slots thick GPUs, thin GPUs can be mounted at the second slot. In addition, the L-type support bracket can be adjusted according to the GPU’s width and thickness. GEN 4.0 PCIE RISER CABLE The PCIe 4.0 riser cable supports bit rate speeds of 16GT/s. While providing double the bandwidth of PCIe 3.0, the Gen 4.0 riser cable remains backward compatible with a maximum transfer speed, offering great performances. FAN AND RADIATOR COMPATIBILITY When installing a three-slot thick GPU in the upright position, the radiator width clearance beside the bracket is limited to 130mm, and 120mm for fans.