Flat DIN125 Washers are the smallest type of flat washer because their outside diameter (OD) is usually just a little more than twice their inside diameter (ID). If you already have a washer and you are trying to match it measure the inside then look for a size slightly smaller that your measurement. For example the inside measurement of the washer you measured is approx 6.50mm you need to look for a M6 washer. If the washer measured 17.25mm internally then you need a M16 Washer. Designed to be used in all conditions. It is the best material to use in marine coastal chemical and food environments. Stainless steels are largely non-magnetic but it is not uncommon for some stainless steel fasteners especially stamped components like washers to show a small degree of magnetism. This is partly due to the work-hardening of the product during the manufacturing process. Marine Grade Stainless Steel A4-70 G316 can be easily identified by the following markings: A4 A4-70 A4-80 316 or G316. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.