Milwaukee 48222933 - 14-in-1 Precision Multi-Bit Screwdriver

Break on the first day the spring lossBall came out attachment does not stayMaking it difficult to use

Excellent Milwaukee Quality!! Milwaukee does not disappoint.

this was a repurchase, because all the bits of the previous one were lost. Before I can even use the new one the first time, the first bit had fallen out and was lost.

A nice precision set with the sizes it has.

In review of this "Milwaukee 14 and 1 precision multi bit screwdriver". This is convenient that all the bits are kept in the screw driver and not separate that way they don't get lost or misplaced. Everything just plugs together. This has 1/8" and 3/32" straight bits, phillips P0 and P00 bits, TORX T7, T8, T10, and T15 also has nut driver's in 9/64", 5/32", 3/16", 7/32", 1/4", and 5/16". The 5/16" size is built into the handle and would be hard to get the torque needed it's really made for the smaller one's. The TORX bit's have the hole in the center for security screws. All in all it's a good addition to a tool box for smaller size work. Overall length is 7 3/8 inches.

A nifty precision screwdriver set

I own a larger version of this design that I really like. Since I do electronics repair I was pleased to find this precision version of the same nesting design. There are 4 double ended bits, Phillips 00 and 0, slotted 3/32" and 1/8", and 4 security (hole in the middle) Torx - #7, #8, #10, and #15. Each bit is laser-etched with a small but legible label.The nesting nut drivers cover 9/64" to 1/4" by 1/32nds, plus 5/16". I found the labels on these harder to read but OK when I turn them to get the lighting just right.Overall length is 7.25" and handle width is 5/8". The back cap rotates and the handle has ribs where my fingers land when spinning the driver. All parts are retained by ball detents. The parts will only fit together one way, simplifying reassembly ... MoreI own a larger version of this design that I really like. Since I do electronics repair I was pleased to find this precision version of the same nesting design. There are 4 double ended bits, Phillips 00 and 0, slotted 3/32" and 1/8", and 4 security (hole in the middle) Torx - #7, #8, #10, and #15. Each bit is laser-etched with a small but legible label.The nesting nut drivers cover 9/64" to 1/4" by 1/32nds, plus 5/16". I found the labels on these harder to read but OK when I turn them to get the lighting just right.Overall length is 7.25" and handle width is 5/8". The back cap rotates and the handle has ribs where my fingers land when spinning the driver. All parts are retained by ball detents. The parts will only fit together one way, simplifying reassembly when using multiple bits. It has a limited lifetime warranty and is made in China.

Good product , versitle...

The bits should fit a little tighter in the holders.

Nice compact design

This is a nice set of small precision tools. Essentially it is a screwdriver with a shaft that contains 14 different bits of hex drives. The design is clever, the shaft is double ended, providing two different hex drivers. In each end goes another double ended driver, providing another 4 hex nut drivers. In each of those there are double-ended driver bits.In all you get the following nut-drivers:9/64” 7/32” 5/32” ¼” 3/16” 5/16”The driver bits you get are:PH00, PH0 Phillips3/32” ⅛” flat head screwdriverT7, T8, T10, T15 TorxEach size is either laser engraved or stamped on the bits.The rear of the tool also has a rotating end allowing good pressure to be kept on the tool while turning.Made in ChinaLimited Lifetime Warranty

Nice handy piece of kit.

Almost perfect just a bit pricey. if it was a bit cheaper it would be perfect.

Small yet mighty!

The precision screwdriver is your one stop shop for precision work. An overall small footprint with huge functionality. This little guy is great to keep in the toolbox for tackling those projects that deal with those pesky micro sized screws. Unlike larger multi-bit screwdrivers, this screwdriver houses all its bits in the main shaft. Think of it as a nesting doll with each section housing two double sided bits. All the bits are pressure mounted and haven’t encountered any issue with the bits falling off or feeling loose. Clear indicators are etched into the bits and large easy to read size indicators are printed at the head of the shaft for socket size identification. The base of the unit allows you to freely spin the screwdriver in the palm of your hand for an ... MoreThe precision screwdriver is your one stop shop for precision work. An overall small footprint with huge functionality. This little guy is great to keep in the toolbox for tackling those projects that deal with those pesky micro sized screws. Unlike larger multi-bit screwdrivers, this screwdriver houses all its bits in the main shaft. Think of it as a nesting doll with each section housing two double sided bits. All the bits are pressure mounted and haven’t encountered any issue with the bits falling off or feeling loose. Clear indicators are etched into the bits and large easy to read size indicators are printed at the head of the shaft for socket size identification. The base of the unit allows you to freely spin the screwdriver in the palm of your hand for an ergonomic feel. The base also features two flat spots to prevent the screwdriver from rolling away when placed down. Overall, very pleased with this little guy.

Very useful screwdriver

The concept and execution behind this precision screwdriver is great! There's four double sided bits with common Torx, Phillips, and slotted sizes. The bits fit inside different sized nut driver extensions. Everything is clearly marked. This screwdriver has come in handy when working on smaller electronics projects of mine, around the house, and when maintaining my 3D printer. Comfort-wise it is great to use as it has a rubberized coating and the back cap spins freely. My only gripe is that when fully inserted into the nut driver extension, the Phillips and slotted bits fit a bit loose. This normally isn't a cause for concern, but I had an incident where I thought one of them was firmly in place, however, it was not and ended up falling out inside the bigger ... MoreThe concept and execution behind this precision screwdriver is great! There's four double sided bits with common Torx, Phillips, and slotted sizes. The bits fit inside different sized nut driver extensions. Everything is clearly marked. This screwdriver has come in handy when working on smaller electronics projects of mine, around the house, and when maintaining my 3D printer. Comfort-wise it is great to use as it has a rubberized coating and the back cap spins freely. My only gripe is that when fully inserted into the nut driver extension, the Phillips and slotted bits fit a bit loose. This normally isn't a cause for concern, but I had an incident where I thought one of them was firmly in place, however, it was not and ended up falling out inside the bigger extension. Just glad I didn't lose it! Zero complaints besides this.