Use as a primer and undercoat for timber, fibreglass, aluminium and concrete, as well as an undercoat over Norglass NORSHIELD ANTI-CORROSIVE PRIMER on steel surfaces, and all areas where Northane colours are to be applied. Grey Shipshape Primer/Undercoat is best for priming under strong colours. White Shipshape Primer/Undercoat for priming under lighter colours such as white & pastels. Suitable for areas of continuous immersion and osmosis repairs. Commonly used as a primer-undercoat for non-ferrous metals and as a topcoat in the bilge area of boats because of its satin gloss finish. SHIPSHAPE is the preferred primer for fibreglass. IMPORTANT: This product is the Hardener Component of a TWO PACK product. This product is the hardener component only. You will need the Base Component too (sold only in a kit), and the two must be mixed together before use. MIXING RATIO: 3 base:1 hardener by volume. COVERAGE: Up to 10 sqm per litre APPLY: Brush, roller or spray (thin with Northane Spraying Thinner) CLEANUP: Norglass Epoxy Thinner MORE INFORMATION Download the Norglass Catalogue & Product Guide Download Product Data Sheet Download Safety Data Sheet for Base Download Safety Data Sheet for Hardener Part NumberSize NOR-4085 125ml NOR-4084 250ml NOR-4089 500ml NOR-4083 1 Litre NOR-4086 2.5 Litres