Specifications: Type: AA Size, Non Rechargeable Battery Open circuit voltage: (at +20°C) 3.67 V Nominal voltage: (at 0.1 mA +20°C) 3.6 V Nominal Capacity: 2.6Ah Nominal Energy: 9.36Wh Pulse capability: Typically up to 250 mA (250 mA/0.1 second pulses, drained every 2 mn at +20°C from undischarged cells with 10 μA base current, yield voltage readings above 3.0 V. The readings may vary according to the pulse characteristics, the temperature, and the cell’s previous history. Fitting the cell with a capacitor may be recommended in severe conditions. Consult Saft) Maximum recommended continuous current: 50 mA (Higher currents are possible, consult Saft) Storage: (recommended) +30°C (+86°F) max (for more severe conditions, consult Saft) Operating temperature range: -60°C/+85°C (Operation above ambient T may lead to reduced capacity and (-76°F/+185°F) lower voltage readings at the beginning of pulses. Consult Saft) Diameter: (max) 14.55 mm (0.57 in) Height: (max) 50.3 mm (1.98 in) Typical weight: 16.7 g (~ 0.6 oz) !!!!! IMPORTANT !!!!! These are very powerful batteries, and extreme care should be taken using them. Ensure to never short positive and negative terminal of the battery! In worst case Lithium batteries can explode or catch fire when used improperly! Use at your own risk. Do not over-discharge! Ensure the equipment you use this battery in will not draw more current from that batteries than it stated “Maximum Continuous Discharge Current” Do not short circuit your batteries! NEVER short circuit a Lithium(or more other) battery! Short circuiting can cause a huge surge of current that will potentially burn out your battery, damage your mod, or even your face! Do not let your batteries touch each other or other metallic items! Keeping your batteries loose, such as in your pockets, is a good way to have your batteries fail and seriously harm you. There are battery holders and covers to keep your batteries safe. Do not dispose any battery in a fire! There are dangerous chemicals in batteries. If you try to burn your batteries they’ll release dangerous fumes and will probably explode. Always dispose your old batteries to a battery recycling center. Main applications Utility metering Automatic meter reading Alarms and security devices Tollgate systems Memory back-up Computer real-time clocks Tracking systems Automotive electronics Professional electronics Saft LS vs LSH Saft’s LS and LSH cylindrical primary lithium cells ranges, all based on Lithium-Thionyl chloride (Li- SOCl 2 ) chemistry perfectly suit high-energy and high-voltage requirements in a wide range of temperatures. The bobbin construction of the LS range enables the maximum loading of active materials and the correspondingly maximum energy. With its remarkably low self-discharge, it perfectly matches long-term(from five to 20 years plus) applications featuring a few μA base currents and periodic pulses, typically in the 5-150 mA range. The LSH range has a spiral construction and includes specific models that can operate at the very high temperatures found in oil and gas applications, for example. The cells are designed for applications requiring pulses as high as 4 A. Package Includes 1 x Battery,
Specifications: Type: AA Size, Non Rechargeable Battery Open circuit voltage: (at +20°C) 3.67 V Nominal voltage: (at 0.1 mA +20°C) 3.6 V Nominal Capacity: 2.6Ah Nominal Energy: 9.36Wh Pulse capability: Typically up to 250 mA (250 mA/0.1 second pulses, drained every 2 mn at +20°C from undischarged cells with 10 μA base current, yield voltage readings above 3.0 V. The readings may vary according to the pulse characteristics, the temperature, and the cell’s previous history. Fitting the cell with a capacitor may be recommended in severe conditions. Consult Saft) Maximum recommended continuous current: 50 mA (Higher currents are possible, consult Saft) Storage: (recommended) +30°C (+86°F) max (for more severe conditions, consult Saft) Operating temperature range: -60°C/+85°C (Operation above ambient T may lead to reduced capacity and (-76°F/+185°F) lower voltage readings at the beginning of pulses. Consult Saft) Diameter: (max) 14.55 mm (0.57 in) Height: (max) 50.3 mm (1.98 in) Typical weight: 16.7 g (~ 0.6 oz) !!!!! IMPORTANT !!!!! These are very powerful batteries, and extreme care should be taken using them. Ensure to never short positive and negative terminal of the battery! In worst case Lithium batteries can explode or catch fire when used improperly! Use at your own risk. Do not over-discharge! Ensure the equipment you use this battery in will not draw more current from that batteries than it stated “Maximum Continuous Discharge Current” Do not short circuit your batteries! NEVER short circuit a Lithium(or more other) battery! Short circuiting can cause a huge surge of current that will potentially burn out your battery, damage your mod, or even your face! Do not let your batteries touch each other or other metallic items! Keeping your batteries loose, such as in your pockets, is a good way to have your batteries fail and seriously harm you. There are battery holders and covers to keep your batteries safe. Do not dispose any battery in a fire! There are dangerous chemicals in batteries. If you try to burn your batteries they’ll release dangerous fumes and will probably explode. Always dispose your old batteries to a battery recycling center. Main applications Utility metering Automatic meter reading Alarms and security devices Tollgate systems Memory back-up Computer real-time clocks Tracking systems Automotive electronics Professional electronics Saft LS vs LSH Saft’s LS and LSH cylindrical primary lithium cells ranges, all based on Lithium-Thionyl chloride (Li- SOCl 2 ) chemistry perfectly suit high-energy and high-voltage requirements in a wide range of temperatures. The bobbin construction of the LS range enables the maximum loading of active materials and the correspondingly maximum energy. With its remarkably low self-discharge, it perfectly matches long-term(from five to 20 years plus) applications featuring a few μA base currents and periodic pulses, typically in the 5-150 mA range. The LSH range has a spiral construction and includes specific models that can operate at the very high temperatures found in oil and gas applications, for example. The cells are designed for applications requiring pulses as high as 4 A. Package Includes 1 x Battery,
in 6 offers
Specifications: Type: AA Size, Non Rechargeable Battery Open circuit voltage: (at +20°C) 3.67 V Nominal voltage: (at 0.1 mA +20°C) 3.6 V Nominal Capacity: 2.6Ah Nominal Energy: 9.36Wh Pulse capability: Typically up to 250 mA (250 mA/0.1 second pulses, drained every 2 mn at +20°C from undischarged cells with 10 μA base current, yield voltage readings above 3.0 V. The readings may vary according to the pulse characteristics, the temperature, and the cell’s previous history. Fitting the cell with a capacitor may be recommended in severe conditions. Consult Saft) Maximum recommended continuous current: 50 mA (Higher currents are possible, consult Saft) Storage: (recommended) +30°C (+86°F) max (for more severe conditions, consult Saft) Operating temperature range: -60°C/+85°C (Operation above ambient T may lead to reduced capacity and (-76°F/+185°F) lower voltage readings at the beginning of pulses. Consult Saft) Diameter: (max) 14.55 mm (0.57 in) Height: (max) 50.3 mm (1.98 in) Typical weight: 16.7 g (~ 0.6 oz) !!!!! IMPORTANT !!!!! These are very powerful batteries, and extreme care should be taken using them. Ensure to never short positive and negative terminal of the battery! In worst case Lithium batteries can explode or catch fire when used improperly! Use at your own risk. Do not over-discharge! Ensure the equipment you use this battery in will not draw more current from that batteries than it stated “Maximum Continuous Discharge Current” Do not short circuit your batteries! NEVER short circuit a Lithium(or more other) battery! Short circuiting can cause a huge surge of current that will potentially burn out your battery, damage your mod, or even your face! Do not let your batteries touch each other or other metallic items! Keeping your batteries loose, such as in your pockets, is a good way to have your batteries fail and seriously harm you. There are battery holders and covers to keep your batteries safe. Do not dispose any battery in a fire! There are dangerous chemicals in batteries. If you try to burn your batteries they’ll release dangerous fumes and will probably explode. Always dispose your old batteries to a battery recycling center. Main applications Utility metering Automatic meter reading Alarms and security devices Tollgate systems Memory back-up Computer real-time clocks Tracking systems Automotive electronics Professional electronics Saft LS vs LSH Saft’s LS and LSH cylindrical primary lithium cells ranges, all based on Lithium-Thionyl chloride (Li- SOCl 2 ) chemistry perfectly suit high-energy and high-voltage requirements in a wide range of temperatures. The bobbin construction of the LS range enables the maximum loading of active materials and the correspondingly maximum energy. With its remarkably low self-discharge, it perfectly matches long-term(from five to 20 years plus) applications featuring a few μA base currents and periodic pulses, typically in the 5-150 mA range. The LSH range has a spiral construction and includes specific models that can operate at the very high temperatures found in oil and gas applications, for example. The cells are designed for applications requiring pulses as high as 4 A. Package Includes 1 x Battery,
Specifications: Type: AA Size, Non Rechargeable Battery Open circuit voltage: (at +20°C) 3.67 V Nominal voltage: (at 0.1 mA +20°C) 3.6 V Nominal Capacity: 2.6Ah Nominal Energy: 9.36Wh Pulse capability: Typically up to 250 mA (250 mA/0.1 second pulses, drained every 2 mn at +20°C from undischarged cells with 10 μA base current, yield voltage readings above 3.0 V. The readings may vary according to the pulse characteristics, the temperature, and the cell’s previous history. Fitting the cell with a capacitor may be recommended in severe conditions. Consult Saft) Maximum recommended continuous current: 50 mA (Higher currents are possible, consult Saft) Storage: (recommended) +30°C (+86°F) max (for more severe conditions, consult Saft) Operating temperature range: -60°C/+85°C (Operation above ambient T may lead to reduced capacity and (-76°F/+185°F) lower voltage readings at the beginning of pulses. Consult Saft) Diameter: (max) 14.55 mm (0.57 in) Height: (max) 50.3 mm (1.98 in) Typical weight: 16.7 g (~ 0.6 oz) !!!!! IMPORTANT !!!!! These are very powerful batteries, and extreme care should be taken using them. Ensure to never short positive and negative terminal of the battery! In worst case Lithium batteries can explode or catch fire when used improperly! Use at your own risk. Do not over-discharge! Ensure the equipment you use this battery in will not draw more current from that batteries than it stated “Maximum Continuous Discharge Current” Do not short circuit your batteries! NEVER short circuit a Lithium(or more other) battery! Short circuiting can cause a huge surge of current that will potentially burn out your battery, damage your mod, or even your face! Do not let your batteries touch each other or other metallic items! Keeping your batteries loose, such as in your pockets, is a good way to have your batteries fail and seriously harm you. There are battery holders and covers to keep your batteries safe. Do not dispose any battery in a fire! There are dangerous chemicals in batteries. If you try to burn your batteries they’ll release dangerous fumes and will probably explode. Always dispose your old batteries to a battery recycling center. Main applications Utility metering Automatic meter reading Alarms and security devices Tollgate systems Memory back-up Computer real-time clocks Tracking systems Automotive electronics Professional electronics Saft LS vs LSH Saft’s LS and LSH cylindrical primary lithium cells ranges, all based on Lithium-Thionyl chloride (Li- SOCl 2 ) chemistry perfectly suit high-energy and high-voltage requirements in a wide range of temperatures. The bobbin construction of the LS range enables the maximum loading of active materials and the correspondingly maximum energy. With its remarkably low self-discharge, it perfectly matches long-term(from five to 20 years plus) applications featuring a few μA base currents and periodic pulses, typically in the 5-150 mA range. The LSH range has a spiral construction and includes specific models that can operate at the very high temperatures found in oil and gas applications, for example. The cells are designed for applications requiring pulses as high as 4 A. Package Includes 1 x Battery,
Last updated at 05/11/2024 16:04:50
Go to store
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
+ $5.98 delivery
Go to store
+ $5.49 delivery
Go to store
+ $5.98 delivery
Go to store
Go to store
See 4 more history offers
available 17 days ago
Low stock
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
available 6 months ago
Low stock
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
available 6 months ago
Low stock
available 6 months ago
Low stock
3.6V 1200mAh ER14250 Lithium Battery
$9.15 - $29.10
Compare 8 offers
Earn | 3x points |
Open circuit voltage | (at +20oC) 3.67 V |
Nominal voltage | (at 0.1 mA +20oC) 3.6 V |
Nominal Capacity | 2.6Ah |
Nominal Energy | 9.36Wh |
Updated about 7 hours ago
See 4 more history offers
Earn | 3x points |
Open circuit voltage | (at +20oC) 3.67 V |
Nominal voltage | (at 0.1 mA +20oC) 3.6 V |
Nominal Capacity | 2.6Ah |
Nominal Energy | 9.36Wh |