Support up to 12 drives in unprecedented 30 liter Micro-ATX chassis size Designed for vertical or Horizontal position, allow users to freely place CS381 anywhere Includes two long-life (L10, 70, 000 hours) Dual Ball bearing 120mm fans Hot-swap drive trays support up to eight 3.5” or 2.5” sas-12g/ sata-6g drives with two LED indicators for displaying drive status Accommodates SFX or SFX-L power supply Support normal height expansion Slots for installation of cards up to 267mm long Kensington lock on front panel for additional security Case storage series. Support up to eight 3.5” or 2.5” sas-12g/ sata-6g drives with two LED indicators for displaying drive status. For CPU cooling, the CS381 has room to accommodate up to a 240mm radiator for nearly unlimited CPU choices. For extra security, The entire front can be locked to prevent unwanted drive removal and power button can also be locked together to prevent accidental power on/off. Designed to house Micro-ATX motherboard, the CS381 gives users a wide array of hardware options that includes support for 3.5” or 2.5” drive in SATA or SAS format, high-end graphics card, and RAID cards.
Support up to 12 drives in unprecedented 30 liter Micro-ATX chassis size Designed for vertical or Horizontal position, allow users to freely place CS381 anywhere Includes two long-life (L10, 70, 000 hours) Dual Ball bearing 120mm fans Hot-swap drive trays support up to eight 3.5” or 2.5” sas-12g/ sata-6g drives with two LED indicators for displaying drive status Accommodates SFX or SFX-L power supply Support normal height expansion Slots for installation of cards up to 267mm long Kensington lock on front panel for additional security Case storage series. Support up to eight 3.5” or 2.5” sas-12g/ sata-6g drives with two LED indicators for displaying drive status. For CPU cooling, the CS381 has room to accommodate up to a 240mm radiator for nearly unlimited CPU choices. For extra security, The entire front can be locked to prevent unwanted drive removal and power button can also be locked together to prevent accidental power on/off. Designed to house Micro-ATX motherboard, the CS381 gives users a wide array of hardware options that includes support for 3.5” or 2.5” drive in SATA or SAS format, high-end graphics card, and RAID cards.
in 2 offers
The lowest price for Silverstone CS381 Micro-ATX NAS Case - Black right now is $3,242.66 at Amazon.com.au, compared across 2 retailers.
The all-time low was $320.00 on 18 Jan 2024 — today's price is 913% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 19 Sept 2026.
Silverstone CS381 Micro-ATX NAS Case - Black
Support up to 12 drives in unprecedented 30 liter Micro-ATX chassis size Designed for vertical or Horizontal position, allow users to freely place CS381 anywhere Includes two long-life (L10, 70, 000 hours) Dual Ball bearing 120mm fans Hot-swap drive trays support up to eight 3.5” or 2.5” sas-12g/ sata-6g drives with two LED indicators for displaying drive status Accommodates SFX or SFX-L power supply Support normal height expansion Slots for installation of cards up to 267mm long Kensington lock on front panel for additional security Case storage series. Support up to eight 3.5” or 2.5” sas-12g/ sata-6g drives with two LED indicators for displaying drive status. For CPU cooling, the CS381 has room to accommodate up to a 240mm radiator for nearly unlimited CPU choices. For extra security, The entire front can be locked to prevent unwanted drive removal and power button can also be locked together to prevent accidental power on/off. Designed to house Micro-ATX motherboard, the CS381 gives users a wide array of hardware options that includes support for 3.5” or 2.5” drive in SATA or SAS format, high-end graphics card, and RAID cards.
Support up to 12 drives in unprecedented 30 liter Micro-ATX chassis size Designed for vertical or Horizontal position, allow users to freely place CS381 anywhere Includes two long-life (L10, 70, 000 hours) Dual Ball bearing 120mm fans Hot-swap drive trays support up to eight 3.5” or 2.5” sas-12g/ sata-6g drives with two LED indicators for displaying drive status Accommodates SFX or SFX-L power supply Support normal height expansion Slots for installation of cards up to 267mm long Kensington lock on front panel for additional security Case storage series. Support up to eight 3.5” or 2.5” sas-12g/ sata-6g drives with two LED indicators for displaying drive status. For CPU cooling, the CS381 has room to accommodate up to a 240mm radiator for nearly unlimited CPU choices. For extra security, The entire front can be locked to prevent unwanted drive removal and power button can also be locked together to prevent accidental power on/off. Designed to house Micro-ATX motherboard, the CS381 gives users a wide array of hardware options that includes support for 3.5” or 2.5” drive in SATA or SAS format, high-end graphics card, and RAID cards.
Last updated at 19/09/2026 10:18:01
SilverStone Technology Premium Computer Case
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
SilverStone SST-CS381 - Case Storage ATX Midi Tower Computer Case, black internal, support 8x 3.5" or 2.5" Hot-Swap HDD Bays, lockable front door,
Delivery between 23–27 Sept $41
originally posted on scan.co.uk
It's a good case, nicely laid out and fairly easy to work in with access from both sides and top (and the back if the fans are out). Pay attention to the size of your cpu cooler as there isn't much space above the socket, I used a noctual L9i which has enough clearance to get air in, and with a 65W cpu it's not an issue.However as some other people have noted, if you plan on populating all 8 bays with hard drives, the stock cooling is inadequate. With the stock fan config mine got to >60C even at full fan speed.After a few iterations I've settled on using 4 noctua 120mm fans (the redux ones), all configured as exhaust, the psu mounted fan up (to also act as an exhaust, however mine never reaches the load required to actually spin it's fan) and taping over all ... MoreIt's a good case, nicely laid out and fairly easy to work in with access from both sides and top (and the back if the fans are out). Pay attention to the size of your cpu cooler as there isn't much space above the socket, I used a noctual L9i which has enough clearance to get air in, and with a 65W cpu it's not an issue.However as some other people have noted, if you plan on populating all 8 bays with hard drives, the stock cooling is inadequate. With the stock fan config mine got to >60C even at full fan speed.After a few iterations I've settled on using 4 noctua 120mm fans (the redux ones), all configured as exhaust, the psu mounted fan up (to also act as an exhaust, however mine never reaches the load required to actually spin it's fan) and taping over all the other holes in the case (pci slot covers, under psu, etc). This leads to a negative pressure setup which pulls air in from the front through the drives.Running a full smart long test on all the drives with the fans at around 900rpm (audible but not annoying) kept the drives around 45C in a 22C ambient. In normal use the drives stay around 35-ish C.If you're in the market for a DIY nas case, this is a great non-rack, non-overseas 8-bay with mATX support. Just mind the cooling.
originally posted on scorptec.com.au
Honestly I'm really happy with the case, the build quality is great, however it is like an oven for drives because there are a number of ways for the fans to suck are in through the vents instead of over the drives. I used duct tape to cover everything that didn't have a fan exhausting through it, so now the only possible way for air to enter the case is through the drive cages.With this 'mod' the drives now sit comfortably about 15-20 degrees above ambient, so on cooler days there is no problem while hotter days see the occasional 45-50 degree drives when they're in use. For me this is acceptable, for others perhaps not.The rest of the case is great, fun to build in and lots of great features, plus the backplane is excellent. Just would have expected better ... MoreHonestly I'm really happy with the case, the build quality is great, however it is like an oven for drives because there are a number of ways for the fans to suck are in through the vents instead of over the drives. I used duct tape to cover everything that didn't have a fan exhausting through it, so now the only possible way for air to enter the case is through the drive cages.With this 'mod' the drives now sit comfortably about 15-20 degrees above ambient, so on cooler days there is no problem while hotter days see the occasional 45-50 degree drives when they're in use. For me this is acceptable, for others perhaps not.The rest of the case is great, fun to build in and lots of great features, plus the backplane is excellent. Just would have expected better temperatures at this price.
originally posted on scan.co.uk
I would say that I got what I was looking for with this case. Mainly the 8 hot swap bays, which I am certainly pleased with. Solid structure though I do appear to have scuffed the plastic fascia moving this around during the install.The bays do obstruct the board and while I didn't struggle with the cables it was tight in parts.Overall somewhat expensive for what you get but there doeesn't really seem to be a competitor to this case so I guess it gets away with it.Pleased with it at any rate.
SilverStone Technology Premium Computer Case
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
SilverStone SST-CS381 - Case Storage ATX Midi Tower Computer Case, black internal, support 8x 3.5" or 2.5" Hot-Swap HDD Bays, lockable front door,
Delivery between 23–27 Sept $41
It's a good case, nicely laid out and fairly easy to work in with access from both sides and top (and the back if the fans are out). Pay attention to the size of your cpu cooler as there isn't much space above the socket, I used a noctual L9i which has enough clearance to get air in, and with a 65W cpu it's not an issue.However as some other people have noted, if you plan on populating all 8 bays with hard drives, the stock cooling is inadequate. With the stock fan config mine got to >60C even at full fan speed.After a few iterations I've settled on using 4 noctua 120mm fans (the redux ones), all configured as exhaust, the psu mounted fan up (to also act as an exhaust, however mine never reaches the load required to actually spin it's fan) and taping over all ... MoreIt's a good case, nicely laid out and fairly easy to work in with access from both sides and top (and the back if the fans are out). Pay attention to the size of your cpu cooler as there isn't much space above the socket, I used a noctual L9i which has enough clearance to get air in, and with a 65W cpu it's not an issue.However as some other people have noted, if you plan on populating all 8 bays with hard drives, the stock cooling is inadequate. With the stock fan config mine got to >60C even at full fan speed.After a few iterations I've settled on using 4 noctua 120mm fans (the redux ones), all configured as exhaust, the psu mounted fan up (to also act as an exhaust, however mine never reaches the load required to actually spin it's fan) and taping over all the other holes in the case (pci slot covers, under psu, etc). This leads to a negative pressure setup which pulls air in from the front through the drives.Running a full smart long test on all the drives with the fans at around 900rpm (audible but not annoying) kept the drives around 45C in a 22C ambient. In normal use the drives stay around 35-ish C.If you're in the market for a DIY nas case, this is a great non-rack, non-overseas 8-bay with mATX support. Just mind the cooling.
Honestly I'm really happy with the case, the build quality is great, however it is like an oven for drives because there are a number of ways for the fans to suck are in through the vents instead of over the drives. I used duct tape to cover everything that didn't have a fan exhausting through it, so now the only possible way for air to enter the case is through the drive cages.With this 'mod' the drives now sit comfortably about 15-20 degrees above ambient, so on cooler days there is no problem while hotter days see the occasional 45-50 degree drives when they're in use. For me this is acceptable, for others perhaps not.The rest of the case is great, fun to build in and lots of great features, plus the backplane is excellent. Just would have expected better ... MoreHonestly I'm really happy with the case, the build quality is great, however it is like an oven for drives because there are a number of ways for the fans to suck are in through the vents instead of over the drives. I used duct tape to cover everything that didn't have a fan exhausting through it, so now the only possible way for air to enter the case is through the drive cages.With this 'mod' the drives now sit comfortably about 15-20 degrees above ambient, so on cooler days there is no problem while hotter days see the occasional 45-50 degree drives when they're in use. For me this is acceptable, for others perhaps not.The rest of the case is great, fun to build in and lots of great features, plus the backplane is excellent. Just would have expected better temperatures at this price.
I would say that I got what I was looking for with this case. Mainly the 8 hot swap bays, which I am certainly pleased with. Solid structure though I do appear to have scuffed the plastic fascia moving this around during the install.The bays do obstruct the board and while I didn't struggle with the cables it was tight in parts.Overall somewhat expensive for what you get but there doeesn't really seem to be a competitor to this case so I guess it gets away with it.Pleased with it at any rate.
