StealthMounts TRAX90 Track Saw Square For Festool Track Saws | 90° Right Angle Plunge Saw Guide Rail Angle Stop
Right Angle Track Saw Square Guide compatible with Festool Track Saw Guide Rails StealthMounts Trax90 provides an instant 90 degree Track Saw Angle without need for measuring and clamping your Track Saw Guide Rail. Simply place the Track Saw Guide on the material and push the Trax90 Track Saw Square to align with the edge, instantly setting your track at 90 degrees and ready for cutting. The Trax90 Right Angle Guide slides into your Festool Track and holds firmly using our sprung slide design, no need to make any adjustments or deal with tightening clamps. The vacuum hose guide stops your hose (or power cable) catching on the edge of the track or getting in the way - smoother cutting with no more snagging. The Easiest to use and lightest 90 Degree Right Angle Track Saw Square on the Market 2 OPTIONS: Trax90 recommended for shorter Tracks (up to 1200 mm or 48 in). Trax90 XL recommended for longer Tracks (1200 or 48 inches and above). **Most people buy one of each. Also Compatible with Wen, Triton, and Power Tech Track Saw Guides. Manufactured in the United Kingdom using strong ABS Injection Moulded Plastic StealthMounts Trax90 allows you to instantly and securely hold your track a at a 90 angle ensuring precise sheet cutting. Our rail square allows you to improve the accuracy of your cuts being able to produce precise and re reproducible 90 cutting. Trax90 provides instant material alignment for your Festool plunge saw track. Combined with integrated vacuum hose guidance, this saves time and increases cutting accuracy. Simply place the track on the material and push the Trax90 to align with the edge, instantly setting your track at 90 degrees and ready for cutting. The vacuum hose guide stops your hose (or power cable) catching on the edge of the track or getting in the way - smoother cutting with no more snagging. The Trax90 slides into your Festool track and holds firmly using our unique integrated sprung slide design, no need to make any adjustments or deal with tightening clamps. Trax90 can be slid off from the track from time to time if required, though it is designed to be left fitted to the track to avoid wear. Our Trax90 is lightweight weighing at less than half a pound (6oz). Make mounting your track a breeze by fitting the foot of a StealthMounts Cleat 'n' Feet set, the Trax90 features mounting points for the foot and allows the track to be quickly stowed on a wall or other vertical surface. There is also a SteathMounts Trax90 XL available featuring an extended square angle and lip, ideal for longer tracks or where visual confirmation of 90 degree alignment is required. Perfect for your workshop!! Manufactured in the United Kingdom, Trax90 is made from extremely durable injection moulded ABS plastic.
Right Angle Track Saw Square Guide compatible with Festool Track Saw Guide Rails StealthMounts Trax90 provides an instant 90 degree Track Saw Angle without need for measuring and clamping your Track Saw Guide Rail. Simply place the Track Saw Guide on the material and push the Trax90 Track Saw Square to align with the edge, instantly setting your track at 90 degrees and ready for cutting. The Trax90 Right Angle Guide slides into your Festool Track and holds firmly using our sprung slide design, no need to make any adjustments or deal with tightening clamps. The vacuum hose guide stops your hose (or power cable) catching on the edge of the track or getting in the way - smoother cutting with no more snagging. The Easiest to use and lightest 90 Degree Right Angle Track Saw Square on the Market 2 OPTIONS: Trax90 recommended for shorter Tracks (up to 1200 mm or 48 in). Trax90 XL recommended for longer Tracks (1200 or 48 inches and above). **Most people buy one of each. Also Compatible with Wen, Triton, and Power Tech Track Saw Guides. Manufactured in the United Kingdom using strong ABS Injection Moulded Plastic StealthMounts Trax90 allows you to instantly and securely hold your track a at a 90 angle ensuring precise sheet cutting. Our rail square allows you to improve the accuracy of your cuts being able to produce precise and re reproducible 90 cutting. Trax90 provides instant material alignment for your Festool plunge saw track. Combined with integrated vacuum hose guidance, this saves time and increases cutting accuracy. Simply place the track on the material and push the Trax90 to align with the edge, instantly setting your track at 90 degrees and ready for cutting. The vacuum hose guide stops your hose (or power cable) catching on the edge of the track or getting in the way - smoother cutting with no more snagging. The Trax90 slides into your Festool track and holds firmly using our unique integrated sprung slide design, no need to make any adjustments or deal with tightening clamps. Trax90 can be slid off from the track from time to time if required, though it is designed to be left fitted to the track to avoid wear. Our Trax90 is lightweight weighing at less than half a pound (6oz). Make mounting your track a breeze by fitting the foot of a StealthMounts Cleat 'n' Feet set, the Trax90 features mounting points for the foot and allows the track to be quickly stowed on a wall or other vertical surface. There is also a SteathMounts Trax90 XL available featuring an extended square angle and lip, ideal for longer tracks or where visual confirmation of 90 degree alignment is required. Perfect for your workshop!! Manufactured in the United Kingdom, Trax90 is made from extremely durable injection moulded ABS plastic.
$39.95 - $39.95
in 3 offers
StealthMounts TRAX90 Track Saw Square For Festool Track Saws | 90° Right Angle Plunge Saw Guide Rail Angle Stop
$39.95
Right Angle Track Saw Square Guide compatible with Festool Track Saw Guide Rails StealthMounts Trax90 provides an instant 90 degree Track Saw Angle without need for measuring and clamping your Track Saw Guide Rail. Simply place the Track Saw Guide on the material and push the Trax90 Track Saw Square to align with the edge, instantly setting your track at 90 degrees and ready for cutting. The Trax90 Right Angle Guide slides into your Festool Track and holds firmly using our sprung slide design, no need to make any adjustments or deal with tightening clamps. The vacuum hose guide stops your hose (or power cable) catching on the edge of the track or getting in the way - smoother cutting with no more snagging. The Easiest to use and lightest 90 Degree Right Angle Track Saw Square on the Market 2 OPTIONS: Trax90 recommended for shorter Tracks (up to 1200 mm or 48 in). Trax90 XL recommended for longer Tracks (1200 or 48 inches and above). **Most people buy one of each. Also Compatible with Wen, Triton, and Power Tech Track Saw Guides. Manufactured in the United Kingdom using strong ABS Injection Moulded Plastic StealthMounts Trax90 allows you to instantly and securely hold your track a at a 90 angle ensuring precise sheet cutting. Our rail square allows you to improve the accuracy of your cuts being able to produce precise and re reproducible 90 cutting. Trax90 provides instant material alignment for your Festool plunge saw track. Combined with integrated vacuum hose guidance, this saves time and increases cutting accuracy. Simply place the track on the material and push the Trax90 to align with the edge, instantly setting your track at 90 degrees and ready for cutting. The vacuum hose guide stops your hose (or power cable) catching on the edge of the track or getting in the way - smoother cutting with no more snagging. The Trax90 slides into your Festool track and holds firmly using our unique integrated sprung slide design, no need to make any adjustments or deal with tightening clamps. Trax90 can be slid off from the track from time to time if required, though it is designed to be left fitted to the track to avoid wear. Our Trax90 is lightweight weighing at less than half a pound (6oz). Make mounting your track a breeze by fitting the foot of a StealthMounts Cleat 'n' Feet set, the Trax90 features mounting points for the foot and allows the track to be quickly stowed on a wall or other vertical surface. There is also a SteathMounts Trax90 XL available featuring an extended square angle and lip, ideal for longer tracks or where visual confirmation of 90 degree alignment is required. Perfect for your workshop!! Manufactured in the United Kingdom, Trax90 is made from extremely durable injection moulded ABS plastic.
Right Angle Track Saw Square Guide compatible with Festool Track Saw Guide Rails StealthMounts Trax90 provides an instant 90 degree Track Saw Angle without need for measuring and clamping your Track Saw Guide Rail. Simply place the Track Saw Guide on the material and push the Trax90 Track Saw Square to align with the edge, instantly setting your track at 90 degrees and ready for cutting. The Trax90 Right Angle Guide slides into your Festool Track and holds firmly using our sprung slide design, no need to make any adjustments or deal with tightening clamps. The vacuum hose guide stops your hose (or power cable) catching on the edge of the track or getting in the way - smoother cutting with no more snagging. The Easiest to use and lightest 90 Degree Right Angle Track Saw Square on the Market 2 OPTIONS: Trax90 recommended for shorter Tracks (up to 1200 mm or 48 in). Trax90 XL recommended for longer Tracks (1200 or 48 inches and above). **Most people buy one of each. Also Compatible with Wen, Triton, and Power Tech Track Saw Guides. Manufactured in the United Kingdom using strong ABS Injection Moulded Plastic StealthMounts Trax90 allows you to instantly and securely hold your track a at a 90 angle ensuring precise sheet cutting. Our rail square allows you to improve the accuracy of your cuts being able to produce precise and re reproducible 90 cutting. Trax90 provides instant material alignment for your Festool plunge saw track. Combined with integrated vacuum hose guidance, this saves time and increases cutting accuracy. Simply place the track on the material and push the Trax90 to align with the edge, instantly setting your track at 90 degrees and ready for cutting. The vacuum hose guide stops your hose (or power cable) catching on the edge of the track or getting in the way - smoother cutting with no more snagging. The Trax90 slides into your Festool track and holds firmly using our unique integrated sprung slide design, no need to make any adjustments or deal with tightening clamps. Trax90 can be slid off from the track from time to time if required, though it is designed to be left fitted to the track to avoid wear. Our Trax90 is lightweight weighing at less than half a pound (6oz). Make mounting your track a breeze by fitting the foot of a StealthMounts Cleat 'n' Feet set, the Trax90 features mounting points for the foot and allows the track to be quickly stowed on a wall or other vertical surface. There is also a SteathMounts Trax90 XL available featuring an extended square angle and lip, ideal for longer tracks or where visual confirmation of 90 degree alignment is required. Perfect for your workshop!! Manufactured in the United Kingdom, Trax90 is made from extremely durable injection moulded ABS plastic.