Application The hydraulically controlled mini instantaneous water heater supplies a hand basin with hot water. It is operated with a non-pressurised tap. Convenience features The mini instantaneous water heater is equipped with a flow switch and automatic flow rate control. It keeps the desired water temperature virtually constant up to the maximum output. The individual desired temperature is achieved by adding cold water at the tap. Includes special jet regulator for an ideal water jet and integrated flow rate regulator for use in an existing tap. The heat output is controlled hydraulically in one stage and depending on the flow rate. The appliance is suitable for both over-counter and under-counter installation. Efficiency Mini instantaneous water heaters heat the water directly at the tapping point and only when it is needed. This avoids energy and water losses due to long pipe runs. This results in high energy efficiency. Installation Quick and easy installation thanks to the PROFI-RAPID installation system. Simple installation is carried out using a 2-point fastening, the rear panel also serves as a drilling template and can also compensate for drill hole deviations thanks to the integrated slotted holes. The appliance cap and the inner assembly can be removed in one easy step. Quick and universal water connection thanks to the external metal water connections for the direct installation of taps. Simple electrical connection as the electrical connection cable is prepared as standard. Safety Maintenance-free bare-wire heating system, suitable for limescale and low-limescale water. The integrated safety system is equipped with a pressure cut-out.