Taubmans Water Based Enamel Semi Gloss White Features Use it for doors, windows and trims. Can be cleaned easily (shield the surface from sweat, cleaning agents and grease) Long lasting 75% - 100% - Gloss level. Anti- microbial and environmentally friendly Allergy-friendly Asthma-friendly Premium Enamel product with the latest grease-resistant LTA+ Technology . Application Process Firstly prepare surface Clean and dry the surface. Mould needs to be treated with bleach and rinsed with fresh water then. All surface defects need to be filled with a suitable filler. Using masking tape on wall and ceiling paints is not recommended. Applying on new work Apply Taubmans 3 in 1 once on surfaces such as timber, masonry and paper faced plasterboard. If surfaces previously painted All flaking and loose paint need to be removed. Then sand with fine paper surfaces. Prime before paint if it is necessary. Apply Taubmans 3 in 1 to make sure surfaces are even. Undercoat surfaces which were painted before. Application steps Check colour before use. Applying two coats using a 4mm – 6mm (nap or pile length) roller or brush is recommended. Put thin coats as a thick coat will cause runs to appear. Use a roller if a large area needs to be painted. Mix paint for 5 minutes before use 30 minutes is a Drying time (touch dry) After 2 hours at 25°C and 4 hours in cold or humid areas Recoat If temperatures below 10°C Do not paint Covered area Coverage depends on the surface roughness. Up to 16 m2 per litre. Further Product Information: SDS Taubmans Water Based Enamel Semi Gloss White - 10L SENSITIVE CHOICE National Asthma Council Australia’s Sensitive Choice Program approved the product. LOW VOC Indoor air quality is improved. VOC* levels lowered to 16g/1L. LTA+ TECHNOLOGY Shield the surface from sweat, cleaning agents and grease and Long lasting.