Ubiquiti ER-4 EdgeRouter 4-Port Gigabit Router With SFP
The all-new EdgeRouter 4 brings high-performance at disruptive pricing to a new level. With a 50% increase in performance compared to the EdgeRouter Pro, the EdgeRouter 4 delivers the performance your network needs. Paired with our feature-rich EdgeOS makes this a versatile tool in both Carrier-Grade and Enterprise networks.
The all-new EdgeRouter 4 brings high-performance at disruptive pricing to a new level. With a 50% increase in performance compared to the EdgeRouter Pro, the EdgeRouter 4 delivers the performance your network needs. Paired with our feature-rich EdgeOS makes this a versatile tool in both Carrier-Grade and Enterprise networks.
The all-new EdgeRouter 4 brings high-performance at disruptive pricing to a new level. With a 50% increase in performance compared to the EdgeRouter Pro, the EdgeRouter 4 delivers the performance your network needs. Paired with our feature-rich EdgeOS makes this a versatile tool in both Carrier-Grade and Enterprise networks.
The all-new EdgeRouter 4 brings high-performance at disruptive pricing to a new level. With a 50% increase in performance compared to the EdgeRouter Pro, the EdgeRouter 4 delivers the performance your network needs. Paired with our feature-rich EdgeOS makes this a versatile tool in both Carrier-Grade and Enterprise networks.
in 7 offers
The lowest price for Ubiquiti ER-4 EdgeRouter 4-Port Gigabit Router With SFP right now is $310.00 at BPC Technology, compared across 6 retailers.
The all-time low was $166.52 on 10 Nov 2025 — today's price is 86% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 21 June 2026.
Last updated at 21/06/2026 15:08:07
Ubiquiti Networks ER-4 EdgeRouter 4-Port Gigabit Router with SFP
Delivery between 25–29 June $16.65
Ubiquiti ER-4 EdgeRouter 4-Port Gigabit Router with SFP
Free delivery between 24–29 June
Er-4 Ubiquiti Wired Ethernet Edge Router
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ubiquiti Er-4 Wired Ethernet Edge Router- Same Day Shipping
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ubiquiti EdgeRouter 4-Port
Delivery $9.90
Ubiquiti Er 4 Edge Router 4 Port Router
Delivery between 24 June – 6 July $10
Ubiquiti Er 4 Edge Router 4 Port Router
14-day returns
originally posted on ebay.com
This is a carrier grade data router. I is a bigger brother to the smaller ER-X series. This one has more CPU, memory and storage. It will run at full gigabit speeds where the ER-X approaches it, but does not quite get there. It has an SFP port for running a fiber link or other data backbone to a switch or other devices. Very flexible, highly adaptable unit. If you just want something that works once setup this is it. This is not a simple networking solution, you need more items to complete a home wifi system with this, and some networking knowledge.
originally posted on scan.co.uk
I was having a lot of issues with ping spikes. My network is quite large (40+ devices) and having done some tests with my Orbi mesh router and also the original Sky router I spotted I was suffering an issue called buffer bloat. Id never heard of this but made instant sense. Streaming Netflix, downloading, normal speed tests all showed an excellent connection, however games, zoom calls as well as my work VPN would suffer glitches. Games could be near unplayable despite 150Mbps speeds.Did some research and this ER4 has completely changed my network. It’s now so stable and with no ping issues whatsoever.My set up:1. EdgeRouter 4 is connected directly to ONT fibre connection2. Netgear orbi in bridge mode providing wifi access pointsIt does take a lot of set up ... MoreI was having a lot of issues with ping spikes. My network is quite large (40+ devices) and having done some tests with my Orbi mesh router and also the original Sky router I spotted I was suffering an issue called buffer bloat. Id never heard of this but made instant sense. Streaming Netflix, downloading, normal speed tests all showed an excellent connection, however games, zoom calls as well as my work VPN would suffer glitches. Games could be near unplayable despite 150Mbps speeds.Did some research and this ER4 has completely changed my network. It’s now so stable and with no ping issues whatsoever.My set up:1. EdgeRouter 4 is connected directly to ONT fibre connection2. Netgear orbi in bridge mode providing wifi access pointsIt does take a lot of set up and although I’m fine with technology I’m no network expert. If I can manage it though anyone could with the help of Google and YouTube.Notes1. Set up smart queue2. Sky uses MER so I had to set up DHCP Option 61. The syntax for this is hard and took some trial and error using the config tree3. IPv6 caused vpn issues. Tried disabling it but still had problems possibly at local machine. In end I found a page on Google that described the IPv6 settings you need. Problem then solvedI honestly think every home should just have one of these makes my network and internet access flawless but it takes some configuring. I’d love to see more options in UI to configure without having to go to config tree which requires some knowledge to understand.
originally posted on neweggbusiness.com
I would recommend you follow this path: 1. Use your current router and pre-download the most current firmware for this Edge router from Ubiquiti's website; 2. WITHOUT connecting the WAN connection to the router, connect your PC's ethernet wire to eth0 of this router and power up; 3. Log in to the router according to instructions; 4. Immediately update the firmware to the current version (version 1.10.3 as of 5/14/2018) - don't bother doing any configuration first; 5. Reboot the router, log in, use the "Basic Setup Wizard" to do the initial configuration - make CERTAIN that you create a new admin user ID and a strong password as part of this step before you connect the router to the internet - this basic setup wizard will activate the DHCP server & NAT redirection so ... MoreI would recommend you follow this path: 1. Use your current router and pre-download the most current firmware for this Edge router from Ubiquiti's website; 2. WITHOUT connecting the WAN connection to the router, connect your PC's ethernet wire to eth0 of this router and power up; 3. Log in to the router according to instructions; 4. Immediately update the firmware to the current version (version 1.10.3 as of 5/14/2018) - don't bother doing any configuration first; 5. Reboot the router, log in, use the "Basic Setup Wizard" to do the initial configuration - make CERTAIN that you create a new admin user ID and a strong password as part of this step before you connect the router to the internet - this basic setup wizard will activate the DHCP server & NAT redirection so the basics will work; 6. Reboot the router & connect your internet ethernet wire to eth0 and connect your PC or switch to eth1. Either reboot your PC or release/renew to get a proper IP address from the router. This should get you going. For further tinkering, such as custom DNS setup or VPN, you can do all that after the basics. If you really want to get fancy, it's even got a CLI mode for lots of tinkering to your heart's content. I had prepared myself for a battle with this router to get the site-to-site VPN working, but I was very pleasantly surprised to get the VPN up and running in about 5 minutes. It doesn't support all of the advanced VPN features (at least, not in the GUI) of my older router, but it has all the basics and got the job done. Conclusion: I needed to upgrade my router because my old router was not keeping up with my 300/30 service, and I'm happy to report that Edge Router 4 is now delivering about 330/31 throughput on that same service. My VOIP phone service still works without any special tinkering to get the service to work, and my site-to-site VPN connection re-established without a hitch. Very happy camper! Now, the only thing left is long-term reliability: I've only had this in place for 3 days now, so I can't speak to that yet. However, I have been using Ubiquiti's UniFi wifi access points reliably for several years now, and I have been happy with their reliability record, including steady firmware updates over the years. I would expect that Ubiquiti will continue to improve the firmware and make it available to users for years to come. That's a lot better than my experience with most other vendors with respect to continual releases of firmware for their networking hardware (Cisco has been especially bad on this point, in my experience). So, if you are not a networking newbie, I would recommend this router. 5/14/2018.
| General | |
| Device Type | Router |
| Enclosure Type | Desktop |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
Ubiquiti Networks ER-4 EdgeRouter 4-Port Gigabit Router with SFP
Delivery between 25–29 June $16.65
Ubiquiti ER-4 EdgeRouter 4-Port Gigabit Router with SFP
Free delivery between 24–29 June
Er-4 Ubiquiti Wired Ethernet Edge Router
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ubiquiti Er-4 Wired Ethernet Edge Router- Same Day Shipping
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ubiquiti EdgeRouter 4-Port
Delivery $9.90
This is a carrier grade data router. I is a bigger brother to the smaller ER-X series. This one has more CPU, memory and storage. It will run at full gigabit speeds where the ER-X approaches it, but does not quite get there. It has an SFP port for running a fiber link or other data backbone to a switch or other devices. Very flexible, highly adaptable unit. If you just want something that works once setup this is it. This is not a simple networking solution, you need more items to complete a home wifi system with this, and some networking knowledge.
I was having a lot of issues with ping spikes. My network is quite large (40+ devices) and having done some tests with my Orbi mesh router and also the original Sky router I spotted I was suffering an issue called buffer bloat. Id never heard of this but made instant sense. Streaming Netflix, downloading, normal speed tests all showed an excellent connection, however games, zoom calls as well as my work VPN would suffer glitches. Games could be near unplayable despite 150Mbps speeds.Did some research and this ER4 has completely changed my network. It’s now so stable and with no ping issues whatsoever.My set up:1. EdgeRouter 4 is connected directly to ONT fibre connection2. Netgear orbi in bridge mode providing wifi access pointsIt does take a lot of set up ... MoreI was having a lot of issues with ping spikes. My network is quite large (40+ devices) and having done some tests with my Orbi mesh router and also the original Sky router I spotted I was suffering an issue called buffer bloat. Id never heard of this but made instant sense. Streaming Netflix, downloading, normal speed tests all showed an excellent connection, however games, zoom calls as well as my work VPN would suffer glitches. Games could be near unplayable despite 150Mbps speeds.Did some research and this ER4 has completely changed my network. It’s now so stable and with no ping issues whatsoever.My set up:1. EdgeRouter 4 is connected directly to ONT fibre connection2. Netgear orbi in bridge mode providing wifi access pointsIt does take a lot of set up and although I’m fine with technology I’m no network expert. If I can manage it though anyone could with the help of Google and YouTube.Notes1. Set up smart queue2. Sky uses MER so I had to set up DHCP Option 61. The syntax for this is hard and took some trial and error using the config tree3. IPv6 caused vpn issues. Tried disabling it but still had problems possibly at local machine. In end I found a page on Google that described the IPv6 settings you need. Problem then solvedI honestly think every home should just have one of these makes my network and internet access flawless but it takes some configuring. I’d love to see more options in UI to configure without having to go to config tree which requires some knowledge to understand.
I would recommend you follow this path: 1. Use your current router and pre-download the most current firmware for this Edge router from Ubiquiti's website; 2. WITHOUT connecting the WAN connection to the router, connect your PC's ethernet wire to eth0 of this router and power up; 3. Log in to the router according to instructions; 4. Immediately update the firmware to the current version (version 1.10.3 as of 5/14/2018) - don't bother doing any configuration first; 5. Reboot the router, log in, use the "Basic Setup Wizard" to do the initial configuration - make CERTAIN that you create a new admin user ID and a strong password as part of this step before you connect the router to the internet - this basic setup wizard will activate the DHCP server & NAT redirection so ... MoreI would recommend you follow this path: 1. Use your current router and pre-download the most current firmware for this Edge router from Ubiquiti's website; 2. WITHOUT connecting the WAN connection to the router, connect your PC's ethernet wire to eth0 of this router and power up; 3. Log in to the router according to instructions; 4. Immediately update the firmware to the current version (version 1.10.3 as of 5/14/2018) - don't bother doing any configuration first; 5. Reboot the router, log in, use the "Basic Setup Wizard" to do the initial configuration - make CERTAIN that you create a new admin user ID and a strong password as part of this step before you connect the router to the internet - this basic setup wizard will activate the DHCP server & NAT redirection so the basics will work; 6. Reboot the router & connect your internet ethernet wire to eth0 and connect your PC or switch to eth1. Either reboot your PC or release/renew to get a proper IP address from the router. This should get you going. For further tinkering, such as custom DNS setup or VPN, you can do all that after the basics. If you really want to get fancy, it's even got a CLI mode for lots of tinkering to your heart's content. I had prepared myself for a battle with this router to get the site-to-site VPN working, but I was very pleasantly surprised to get the VPN up and running in about 5 minutes. It doesn't support all of the advanced VPN features (at least, not in the GUI) of my older router, but it has all the basics and got the job done. Conclusion: I needed to upgrade my router because my old router was not keeping up with my 300/30 service, and I'm happy to report that Edge Router 4 is now delivering about 330/31 throughput on that same service. My VOIP phone service still works without any special tinkering to get the service to work, and my site-to-site VPN connection re-established without a hitch. Very happy camper! Now, the only thing left is long-term reliability: I've only had this in place for 3 days now, so I can't speak to that yet. However, I have been using Ubiquiti's UniFi wifi access points reliably for several years now, and I have been happy with their reliability record, including steady firmware updates over the years. I would expect that Ubiquiti will continue to improve the firmware and make it available to users for years to come. That's a lot better than my experience with most other vendors with respect to continual releases of firmware for their networking hardware (Cisco has been especially bad on this point, in my experience). So, if you are not a networking newbie, I would recommend this router. 5/14/2018.
I bought the Edgerouter 4 after my Edgerouter Lite appeared to have died after 4 1/2 years. It turned out to be a bad power brick, so the Lite is back in service after replacement. I kept the Edgerouter 4 for a second site and it's running just fine.As others have said, Edgerouters are not the easiest to use. While they do have a GUI that can do the basics, the CLI is where the full potential lies. Some enterprising people have even extended its capabilities through homegrown software.While I have rated this 5 stars, I do have to warn people that the future of Edgerouters is in doubt. Ubiquiti appears to have all but stopped development of it. There hasn't been a firmware update in over a year. When firmware isn't regularly maintained, security vulnerabilities ... MoreI bought the Edgerouter 4 after my Edgerouter Lite appeared to have died after 4 1/2 years. It turned out to be a bad power brick, so the Lite is back in service after replacement. I kept the Edgerouter 4 for a second site and it's running just fine.As others have said, Edgerouters are not the easiest to use. While they do have a GUI that can do the basics, the CLI is where the full potential lies. Some enterprising people have even extended its capabilities through homegrown software.While I have rated this 5 stars, I do have to warn people that the future of Edgerouters is in doubt. Ubiquiti appears to have all but stopped development of it. There hasn't been a firmware update in over a year. When firmware isn't regularly maintained, security vulnerabilities become a concern.
Summary: Setup takes some skills. Most people will have to watch multiple videos and carefully read support documents to set up any options beyond basic. Linux command line comes handy.Cool stuff: hardware appears to be future-proof. Ubiquiti offers a family of products that will integrate well with this router. Out-of-the box it will give you 2 subnets on separate ethernet ports (3 with SFP-to-ETH adapter). OpenVPN and L2TP/IPsec servers are built-in but not easy to get to work. Powerful manual configuration. Can be connected to fiber.Not-so-cool stuff: Seriously, this is not for an average computer user. I fully agree with another review which says that you may know some Linux but this takes some knowledge about network package flow, firewalls etc. Many ... MoreSummary: Setup takes some skills. Most people will have to watch multiple videos and carefully read support documents to set up any options beyond basic. Linux command line comes handy.Cool stuff: hardware appears to be future-proof. Ubiquiti offers a family of products that will integrate well with this router. Out-of-the box it will give you 2 subnets on separate ethernet ports (3 with SFP-to-ETH adapter). OpenVPN and L2TP/IPsec servers are built-in but not easy to get to work. Powerful manual configuration. Can be connected to fiber.Not-so-cool stuff: Seriously, this is not for an average computer user. I fully agree with another review which says that you may know some Linux but this takes some knowledge about network package flow, firewalls etc. Many options can only be configured via command line interface (CLI) - example: OpenVPN. The USB port does nothing as of 2021.What I didn't know: setting up VLANs requires managed switch.What you may want to know: Ubiquiti seems to suffer from occasional data mishaps. In early 2021 a catastrophic data breach was leaked to the public. It mostly affected their cloud services, which the ER-4 does not require.
Fast Router. Feels like a quality made product, more like an industrial or enterprise product feel. I have my SB8200 cable modem on eth0, home office on eth1, and Linksys mesh network on eth2. It took me about 30 mins to setup being new to this type of router. Used basic wizard to setup. Made sure NAT was enabled. Firewall is enabled. I had to reset cable modem to get things going. I used various videos on you tube for setup help. Router CPU and RAM barely get used during testing of several 4K Video Streams, ip phone calls, file transfers, and speed tests running at the same time. My COX gigablast connection runs at full speed most of the time. I still need to do some real throughput testing, machine to machine on local network. I use Airflow and VLC to cast 4K ... MoreFast Router. Feels like a quality made product, more like an industrial or enterprise product feel. I have my SB8200 cable modem on eth0, home office on eth1, and Linksys mesh network on eth2. It took me about 30 mins to setup being new to this type of router. Used basic wizard to setup. Made sure NAT was enabled. Firewall is enabled. I had to reset cable modem to get things going. I used various videos on you tube for setup help. Router CPU and RAM barely get used during testing of several 4K Video Streams, ip phone calls, file transfers, and speed tests running at the same time. My COX gigablast connection runs at full speed most of the time. I still need to do some real throughput testing, machine to machine on local network. I use Airflow and VLC to cast 4K content from home office to my living room entertainment center. I definitely noticed a time difference. It simply takes less time for actions to engage and finish. I can tell it has a better brain. Time will tell with reliability but I suspect it will be my router for a long time. So far, I'm happy with its performance.
This was inserted right after my comcast cable modem to split my home network into two separate lans without incurring a performance hit. Which my tests say it does. Happy Holidays in about 30 minutes! One lan is for testing, the other lan is for the home office. Being able to do stupid/fun things on one side and not impact my responsible work on the other lan was the goal. This unit fits. Surprisingly, the GUI is usable on my phone, my table, and PC. Lots of options, a lot of configuration control. Plus has console access (CLI, if ever needed). Online active support forum for questions. Uses a wide variety of affordable SFP interfaces (optical and copper) Hasnt hiccuped. Fun stuff IMO. Looking forward to learning more about/using the built-in sophisticated firewall ... MoreThis was inserted right after my comcast cable modem to split my home network into two separate lans without incurring a performance hit. Which my tests say it does. Happy Holidays in about 30 minutes! One lan is for testing, the other lan is for the home office. Being able to do stupid/fun things on one side and not impact my responsible work on the other lan was the goal. This unit fits. Surprisingly, the GUI is usable on my phone, my table, and PC. Lots of options, a lot of configuration control. Plus has console access (CLI, if ever needed). Online active support forum for questions. Uses a wide variety of affordable SFP interfaces (optical and copper) Hasnt hiccuped. Fun stuff IMO. Looking forward to learning more about/using the built-in sophisticated firewall capability. Based on my experience with this initial purchase, feel confident/inclined to purchasing managed switch(es) for some VLAN experimentation. Appreciate that B&H packaged it well.
As more and more smart devices were being added to my small office network, the ISP provided ZyXel VMG4380 router seemed to be struggling and was having issues with stability. This required a reset to resolve which was inconvenience when miles from the office. The small office didn’t need much so I looked at the TP-Link R600VPN and Ubiquiti ERLite3 as inexpensive replacements that seemed to meet my requirements. I ran across the ER-4 and liked that, for a little more money, its upgraded CPU and memory would provide more margin for higher speed connections and make it a bit more future proof. The router seems like a solid well built unit, nothing flashy just a couple small status lights, functional. The power supply is built in, no external power brick. We have PPPoe ... MoreAs more and more smart devices were being added to my small office network, the ISP provided ZyXel VMG4380 router seemed to be struggling and was having issues with stability. This required a reset to resolve which was inconvenience when miles from the office. The small office didn’t need much so I looked at the TP-Link R600VPN and Ubiquiti ERLite3 as inexpensive replacements that seemed to meet my requirements. I ran across the ER-4 and liked that, for a little more money, its upgraded CPU and memory would provide more margin for higher speed connections and make it a bit more future proof. The router seems like a solid well built unit, nothing flashy just a couple small status lights, functional. The power supply is built in, no external power brick. We have PPPoe on our fibre connection, and once the proper credentials were entered and easy setup run, it was basically plug and play. It been performing well for the month we’ve had it installed. It runs just warm not hot, and is silent. Seems to be loafing. You do have to go out on the web to Ubiquiti for the user manual, which is detailed ,and there is extensive set up advise on the web (including a couple excellent YouTube videos). It is not any harder to set up than any other router, just a slightly different language. For most the easy setup will get you going. Then add port forwarding rules and static LAN IP assignments in the router’s DHCP server if you need them. It has two LAN ports which can be independent or bridged. I have a 16 port switch so I just use one LAN port. Its overkill for the office, but nice to know it can handle more throughput if we eventually choose to upgrade.
I matured from consumer network products to small business ones for a simple reason. I can truly set them up and forget about them. They are over-engineered, and the ER-4 is one of them. Very fast and very reliable. Much smaller than a traditional consumer router, and I definitely recommend you wall mount it. Much better. I use the CLI (command line interface) to set it up, but there are wizards in the main browser menu for simple home networks. This is not plug it in and it will start working. You will need to program it, either manually like I did, or via the wizards. Also, this is routing only, not wifi. For that you will need a consumer router which you configure as an access point. or an off the shelf access point. If you don't understand all of this, don't ... MoreI matured from consumer network products to small business ones for a simple reason. I can truly set them up and forget about them. They are over-engineered, and the ER-4 is one of them. Very fast and very reliable. Much smaller than a traditional consumer router, and I definitely recommend you wall mount it. Much better. I use the CLI (command line interface) to set it up, but there are wizards in the main browser menu for simple home networks. This is not plug it in and it will start working. You will need to program it, either manually like I did, or via the wizards. Also, this is routing only, not wifi. For that you will need a consumer router which you configure as an access point. or an off the shelf access point. If you don't understand all of this, don't worry. I did not either when I first started to learn about how to truly setup a reliable network.
I bought this unit to replace a Ubiqiti ERLite-3 which had become fussy after 6 years of 24/7 operation. It didn't fail completely, just seemed to lockup occasionally over the last week.Having had the experience of learning and working with Ubiquiti products I wanted a new unit that would accept the existing configuration parameters without learning an entirely new interface and set of options as frequently occurs with almost all the other gateway/router manufacturers. And I didn't want or need wireless capability since I already have 3 wireless access points in my network and thus don't need wireless capability in the gateway.I chose the Ubiquiti ER-4 because from my experience Ubiquiti has been extremely reliable with the only necessary reboots/power-downs ... MoreI bought this unit to replace a Ubiqiti ERLite-3 which had become fussy after 6 years of 24/7 operation. It didn't fail completely, just seemed to lockup occasionally over the last week.Having had the experience of learning and working with Ubiquiti products I wanted a new unit that would accept the existing configuration parameters without learning an entirely new interface and set of options as frequently occurs with almost all the other gateway/router manufacturers. And I didn't want or need wireless capability since I already have 3 wireless access points in my network and thus don't need wireless capability in the gateway.I chose the Ubiquiti ER-4 because from my experience Ubiquiti has been extremely reliable with the only necessary reboots/power-downs occurring when I was reconfiguring the collection of 7 switches, 2 NAS systems, and 3 WAPs along with 4 network printers that are on my home network along with about 12 end-user, IOT, TV, and server devices supporting my household.One major benefit of Ubiquiti's solutions is that they keep their configuration parameters in plain text XML-style files in a hierarchical directory structure such that you can easily find and understand what parameters control which features instead of the typical menu-driven binary file format used by other manufacturers. Over the years, Ubiquiti's GUI wizards have gotten better at helping you set various features to their desired condition. One feature I use a lot is the ability to create static IPs. Most consumer-grade devices require you to know the MAC address before you can assign a static IP, but in the ER product line you only need to let the device connect and get a leased IP and then you can easily specify a specific IP by clicking on the lease in the GUI and selecting the Map static IP button.The command set available to configure this device is truly comprehensive and should allow you to perform any task a router could ever be asked to do, although writing scripts to do some of these things can be tricky. But there's a large community of users of Ubiquiti routers and gateways who readily share tips and tricks on how to do out-of-the-ordinary things with managing data streams.I don't have a lot of tricks installed on my Ubiquiti devices, mostly the basics of port forwarding for specific apps and using QOS to support streaming devices, but if it's something a router gateway should be able to do for you, I think you'll find that this device will do it - because unlike most of the other consumer products, they didn't dumb this device down with limited menu choices. You can, if you want, make it walk the dog (assuming you buy the rest of the necessary hardware like a robot with wi-fi and you have a WAP), initiating tasks and sending the commands wirelessly through your WAPs directly from this box - haven't tried it myself yet but the feature set is rich enough to do it and they don't prevent you from customizing the device to your needs!It has excellent monitoring tools that give you a graphical breakdown by node/user of what traffic is going through your system and in what direction, including the applications that are making requests on each port and protocol. I like the Pie Chart most which has segments for each active user showing how much of your bandwidth is being used and by whom.If you're the slightest bit technical and knowledgeable regarding the IP network you will find this to be the ideal tool for managing your network.I highly recommend it!
| General | |
| Device Type | Router |
| Enclosure Type | Desktop |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
