Vallejo Satin Varnish 17 ml
Vallejo Satin Varnish 17 ml Waterbased acrylic varnish with new, quick drying formula, and an acrylic resin of extraordinary hardness and permanence. Protects painted models from dust and scratches, dirt and humidity. Acrylic Varnish should never be applied until the paint has dried completely (see note), and it is recommended to wait at least 24 hours. Varnish should be applied in fine coats at approximately 5-10 minutes intervals.
Vallejo Satin Varnish 17 ml Waterbased acrylic varnish with new, quick drying formula, and an acrylic resin of extraordinary hardness and permanence. Protects painted models from dust and scratches, dirt and humidity. Acrylic Varnish should never be applied until the paint has dried completely (see note), and it is recommended to wait at least 24 hours. Varnish should be applied in fine coats at approximately 5-10 minutes intervals.
Vallejo Satin Varnish 17 ml Waterbased acrylic varnish with new, quick drying formula, and an acrylic resin of extraordinary hardness and permanence. Protects painted models from dust and scratches, dirt and humidity. Acrylic Varnish should never be applied until the paint has dried completely (see note), and it is recommended to wait at least 24 hours. Varnish should be applied in fine coats at approximately 5-10 minutes intervals.
Vallejo Satin Varnish 17 ml Waterbased acrylic varnish with new, quick drying formula, and an acrylic resin of extraordinary hardness and permanence. Protects painted models from dust and scratches, dirt and humidity. Acrylic Varnish should never be applied until the paint has dried completely (see note), and it is recommended to wait at least 24 hours. Varnish should be applied in fine coats at approximately 5-10 minutes intervals.
in 55 offers
The lowest price for Vallejo Satin Varnish 17 ml right now is $2.65 at eBay.com.au, compared across 49 retailers.
The all-time low was $2.63 on 5 June 2026 — today's price is 1% above the lowest ever. This is at or near its all-time low — a good time to buy.
Prices last updated 13 July 2026.
Last updated at 13/07/2026 01:12:25
Vallejo 70522 Permanent Satin Varnish (17ml)
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Satin Varnish Auxiliary 70.522 (18ml) | 8429551705226
Delivery $14.32
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Vallejo Satin Varnish 17 Ml 70522
Delivery $11
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Vallejo 70.522 - Paint, Satin - 17 Ml
Delivery $32.99
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Vallejo Varnish Gloss Matt Satin Acrylic Resin Model Airbrush Paint 17ml Bottle
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Vallejo Artist Varnish 70522 Water-based Acrylic Satin Varnish
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Vallejo 100% Acrylic Resin 17mL Satin Varnish 70.522
Delivery between 17–22 July $11
Vallejo Satin Varnish 17 ml [70522] (6 PCS)
Delivery between Mon – Fri $4
Vallejo Satin Varnish 17 ml [70522]
Delivery between 15–20 July $10.67
Vallejo Satin Varnish 17ml Acrylic Paint (AV70522)
Delivery between 15–22 July $9.50
originally posted on ebay.com
This is a great product to work with - but remember to clean your airbrush immediately, as it dries quickly! However, this enables you to apply several light coats within a short time, which leaves a better look. If you want a slightly shiny but not glossy appearance to your model, this is the one to use!
originally posted on homeessentialsdirect.com
I can't say enough about this product! I have been using this to thin my GW paints 1/1 and it has two excellent benefits. 1. It acts as a mild retarder. I used to have issue painting the eyes on miniatures as the tiny amounts of white or black would dry on the brush before I could place it. This stuff helps keep the paint moist long enough to get the pain on the miniature! 2. It works a bit better than water when thinning your paints for transparent blending, as it's a little bit thicker than water and gives you a bit more control over your thinned paint.
originally posted on homeessentialsdirect.com
I saw some poor reviews from people who seemed to think this was for pottery glazing, or some other purpose. This is intended to allow you to apply very thin, translucent layers of acrylic paint to a miniature. It allows you to get very saturated colors without obscuring details by applying thick coats of paint. It's very good for that purpose. I'll definitely be buying quite a bir more of it!
| Finish type | Metal |
| Item volume | 17 Millilitres |
| Paint type | Acrylic |
| Surface recommendation | ‎Plastic |
| Included components | ‎Acrylic |
Vallejo 70522 Permanent Satin Varnish (17ml)
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Satin Varnish Auxiliary 70.522 (18ml) | 8429551705226
Delivery $14.32
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Vallejo Satin Varnish 17 Ml 70522
Delivery $11
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Vallejo 70.522 - Paint, Satin - 17 Ml
Delivery $32.99
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Vallejo Varnish Gloss Matt Satin Acrylic Resin Model Airbrush Paint 17ml Bottle
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
This is a great product to work with - but remember to clean your airbrush immediately, as it dries quickly! However, this enables you to apply several light coats within a short time, which leaves a better look. If you want a slightly shiny but not glossy appearance to your model, this is the one to use!
I can't say enough about this product! I have been using this to thin my GW paints 1/1 and it has two excellent benefits. 1. It acts as a mild retarder. I used to have issue painting the eyes on miniatures as the tiny amounts of white or black would dry on the brush before I could place it. This stuff helps keep the paint moist long enough to get the pain on the miniature! 2. It works a bit better than water when thinning your paints for transparent blending, as it's a little bit thicker than water and gives you a bit more control over your thinned paint.
I saw some poor reviews from people who seemed to think this was for pottery glazing, or some other purpose. This is intended to allow you to apply very thin, translucent layers of acrylic paint to a miniature. It allows you to get very saturated colors without obscuring details by applying thick coats of paint. It's very good for that purpose. I'll definitely be buying quite a bir more of it!
Im using this product for details on doll repaints: eyes, lips, etc. Its the perfect size for use on dolls and miniatures, and Im very happy I found this instead of wasting more money on a large bottle I would never use up. I leave it to dry overnight after applying and by the next day its good to go. It has the perfect amount of gloss without being overly shiny. The only complaint I have is that one area I applied it to is still slightly sticky feeling; the varnish isnt coming off, it just has a strange texture to it. This may be because I applied too much without allowing the first layer to dry, so dont knock the product just based on that. For a doll that isnt going to be getting touched, the tackiness is nothing to worry about. Overall, I highly recommend this ... MoreIm using this product for details on doll repaints: eyes, lips, etc. Its the perfect size for use on dolls and miniatures, and Im very happy I found this instead of wasting more money on a large bottle I would never use up. I leave it to dry overnight after applying and by the next day its good to go. It has the perfect amount of gloss without being overly shiny. The only complaint I have is that one area I applied it to is still slightly sticky feeling; the varnish isnt coming off, it just has a strange texture to it. This may be because I applied too much without allowing the first layer to dry, so dont knock the product just based on that. For a doll that isnt going to be getting touched, the tackiness is nothing to worry about. Overall, I highly recommend this product for anybody looking to add gloss to details and small areas of their projects.
Not fond of this. Either I received a bad product or overall it pretty much sucks to use. This came out almost as thinner than most acrylic paint so putting it on something was difficult. It took quite some time to dry because of this so forming it was a pain, and once it began to thicken it did so quite quickly. The second issue I had was cleaning and sanding. It did not work well here either. When it was dry (24-48 hours) It was not hard at all. It sanded off powdery and lacked any real cohesion. It reminds me of opening a bag of cement that was exposed to too much humidity and hardened together but comes apart with a little sanding and work. However for what I have used it for, it has ended up working in the end. It paints fairly well, and is easy covered with a ... MoreNot fond of this. Either I received a bad product or overall it pretty much sucks to use. This came out almost as thinner than most acrylic paint so putting it on something was difficult. It took quite some time to dry because of this so forming it was a pain, and once it began to thicken it did so quite quickly. The second issue I had was cleaning and sanding. It did not work well here either. When it was dry (24-48 hours) It was not hard at all. It sanded off powdery and lacked any real cohesion. It reminds me of opening a bag of cement that was exposed to too much humidity and hardened together but comes apart with a little sanding and work. However for what I have used it for, it has ended up working in the end. It paints fairly well, and is easy covered with a clear coat or varnish. Because the end use I give it 3 stars otherwise it would be only 1.
I use Vallejo paint for model making. As with most Vallejo airbrush paint it is user friendly and cleans up nicely. Leave to dry for a couple of days to guarantee a durable surface on your model. Safer to use than say enamels but I would still advice at using a protective face mask.
The liquid comes out milky white, but coats on clear. Serves as a mid point between matte and gloss. See photos for a comparison of the 3 varnishes (from left to right: matte, satin, gloss)
This putty works great IF you understand what you're getting and how you'll use it. First off, this putty DOES NOT dry rock hard as the description and bottle says it does. As others have said, it dries to a "rubbery" consistency and isn't really sandable. It is water soluble so you can remove excess putty with water. Knowing those two things, I use this putty for filling small gaps or fixing deep out of scale panel lines. Here's how I use this putty. I take a toothpick and cut one of the sharp ends off. I then take a pair of pliers and compress the end to make it flat, like a small trowel. I put a small amount of the Vallejo putty on the flat end of the toothpick and work it into the gap, adding more putty as needed. I wait about 10 - 15 minutes and wipe away the ... MoreThis putty works great IF you understand what you're getting and how you'll use it. First off, this putty DOES NOT dry rock hard as the description and bottle says it does. As others have said, it dries to a "rubbery" consistency and isn't really sandable. It is water soluble so you can remove excess putty with water. Knowing those two things, I use this putty for filling small gaps or fixing deep out of scale panel lines. Here's how I use this putty. I take a toothpick and cut one of the sharp ends off. I then take a pair of pliers and compress the end to make it flat, like a small trowel. I put a small amount of the Vallejo putty on the flat end of the toothpick and work it into the gap, adding more putty as needed. I wait about 10 - 15 minutes and wipe away the excess with a damp cotton swab, leaving the putty in the gap. The goal isn't to build up a large amount then sand it down but to get the putty into the gap where it can harden. To test the line, I airbrush a layer of black primer over the gap. If more filling is needed, I repeat the process. So far, I've been able to get pretty decent results.
I used AK interactive acrylics on my T90 (the Russian armor green set, i highly recommend that for Russian armor models). Anyway painting acrylic over enamels is usually not a problem, but doing it the other way round is going to ruin your model's paint since the enamel will cause crazing. Supposedly you should use this if you wanted to apply a wash or filter. I shook it up well, but it came out all clumped up and wouldn't spray out of my airbrush. I tried thinning it but that didn't work either. I gave up and got rattle can acrylic matte clear. It wasn;t the product, it was me trying to hurry the painting, anyway if you use this stir it very well, and maybe thin it about 50% with water or Tamiya thinner or another good acrylic thinner.
You might want to do your own experimenting, but I can say that this stuff definitely cracks. I made sure to let the colored paint dry thoroughly before using the crackle paint, and I also made sure not to disturb the crackle paint much as soon as I painted it on. The crackle paint was a bit of a thicker layer that I slapped on and didn't spread around too much. The directions are a little confusing. It says "brush over basecoat of acrylic color. Once dry, cracks will appear. They will be more visible under second coat of contrasting color. Use varnish to protect coating." To be clear, this stuff cracks the layer that it is painted ON, as in, the "basecoat" is the layer that gets cracked. I don't understand the wording of the instructions saying the cracks will be ... MoreYou might want to do your own experimenting, but I can say that this stuff definitely cracks. I made sure to let the colored paint dry thoroughly before using the crackle paint, and I also made sure not to disturb the crackle paint much as soon as I painted it on. The crackle paint was a bit of a thicker layer that I slapped on and didn't spread around too much. The directions are a little confusing. It says "brush over basecoat of acrylic color. Once dry, cracks will appear. They will be more visible under second coat of contrasting color. Use varnish to protect coating." To be clear, this stuff cracks the layer that it is painted ON, as in, the "basecoat" is the layer that gets cracked. I don't understand the wording of the instructions saying the cracks will be more visible UNDER a second coat - it seems it would just fill in the cracks a bit if it was under a second coat. I dunno. I attached some photos to show you my experience. I had gray primer, then I painted a layer of black, and then painted on the crackle stuff. Then I painted a wash of red. I think I was supposed to paint red, then paint black on top, and then the crackle on top. I'm no expert though. But like I said, it gives you cracks. No peeling unfortunately, but definitely crackle.
| Finish type | Metal |
| Item volume | 17 Millilitres |
| Paint type | Acrylic |
| Surface recommendation | ‎Plastic |
| Included components | ‎Acrylic |
